Applicant | Address | Phone | Applicant Type | |
---|---|---|---|---|
George G. Duncan Doing Business As: GEORGE DUNCAN |
George G. Duncan PO Box 10 SAVANAH, TN 38372 United States |
+1 (731) 926-7191 | GEORGEGDUNCAN@YAHOO.COM | Individual |
Applicant | Address | Phone | |
---|---|---|---|
[Confidential] |
|
|
|
Applicant | Address | Phone | |
---|---|---|---|
The Preparer is same as the reimbursement contact. |
|
|
|
Question | Response |
---|---|
Will the station be sharing equipment with another broadcast television station or stations (e.g., a shared antenna, co-location on a tower, use of the same transmitter room, multiple transmitters feeding a combiner, etc.)? If yes, enter the facility ID's of the other stations and click 'prefill' to download those stations' licensing information. | No |
Briefly describe transition plan | erect new tower, install new building, install new transmitter and antenna cut traffic over to new transmitter, take old transmitter off air |
Section | Question | Response |
---|---|---|
Transmitter Related Expenses | Do you have transmitter related expenses? | Yes |
Section | Question | Response |
---|---|---|
Existing Transmitter Description | Type of change | Purchase New |
Use | Primary (Main) | |
Description of Use | N/A | |
Ownership | Owned | |
Owner | N/A | |
Site | N/A | |
Is this transmitter currently shared with another station? | No | |
Is this transmitter currently in operating condition? | Yes | |
Existing Transmitter Manufacturer and Type | Manufacturer | |
Model | DTV1000 | |
Year | 2012 | |
Type | Solid State | |
Solid State Cooling | Air Cooled | |
Solid State Power Capacity | 1 kW |
Section | Question | Response |
---|---|---|
New Transmitter | Use | Primary (Main) |
Change Type | Purchase New | |
Is this a request for upgraded equipment? | No | |
Manufacturer | ||
Model | DTV-32 | |
Transmitter Type | Solid State | |
Solid State Cooling | Air Cooled | |
Solid State Power capacity | 1 kW | |
Justification for New Transmitter | Old transmitter cannot be retuned |
Section | Question | Response |
---|---|---|
Electrical Service | Service Entrance (3 phases 800A 208V) | No |
Switchgear (industrial 800 amp) | No | |
Transformer (480V) | No | |
Power | N/A | |
Rigid Conduit and Wiring | Yes | |
Size | 1.5 inches | |
Length | 30.0 feet | |
Other Electrical Service | Yes | |
Description | 200 amp service entrance | |
HVAC Service | Does the replacement transmitter require HVAC Service? | Yes |
Type | Heating and Cooling | |
Size | 5 tons | |
Other Size | N/A | |
Transmitter Building Addition/Modification or Leasehold Improvement | Does the Transmitter Building require an addition, modification, other leashold improvement? | Yes |
Size | 400.0 square feet | |
Channel 14 Costs | Is an RF Consulting Engineer needed? | N/A |
Is a channel 14 Mask Filer needed? | N/A | |
Is additional field engineering time needed? | N/A | |
Number of Days | N/A |
Section | Question | Response |
---|---|---|
Antenna Related Expenses | Do you have antenna related expenses? | Yes |
Section | Question | Response |
---|---|---|
Existing Antenna Description | Type of change | Purchase New |
Antenna Use | Primary (Main) | |
Description of Use | N/A | |
Ownership | Owned | |
Owner | N/A | |
Site | N/A | |
Is the existing antenna shared with another station or stations? | No | |
Is the existing antenna directional? | No | |
Is antenna in operating condition? | Yes | |
Is antenna located on or in close proximity to an antenna farm? | No | |
Existing Antenna Manufacturer and Type | Class | Class A |
Mounting | Top Mount | |
Antenna position in stack | Top | |
Polarization | Circular | |
Type | Slotted Coaxial | |
Number of Stations Supported | N/A | |
Number of Panels | N/A | |
Design power capacity in use | N/A | |
Lower Limit | N/A | |
Upper Limit | N/A | |
Other Antenna Type | N/A | |
ERP: | 15.0 kW | |
Manufacturer | ||
Model | DTV-15 | |
Year | 2012 |
Section | Question | Response |
---|---|---|
New Antenna Description | Use | Primary (Main) |
Description of Use | N/A | |
Change Type | Purchase New | |
Is this a request for upgraded equipment? | No | |
Ownership | Owned | |
Owner | N/A | |
Is antenna shared? | No | |
Is antenna directional? | No | |
Will antenna be located on or in close proximity to an antenna farm? | No | |
New Antenna Manufacturer and Types | Class | Class A |
Mounting | Side Mount | |
Antenna position in stack | Top | |
Polarization | Horizontal | |
Type | Slotted Coaxial | |
Number of Stations Supported | N/A | |
Number of Panels/Bays | N/A | |
Lower Limit | N/A | |
Upper Limit | N/A | |
Design power capacity in use | N/A | |
Other Antenna Type | N/A | |
ERP: | 15.0 kW | |
Manufacturer | ||
Model | PSILP8OI | |
Year | 2020 | |
Justification for New Antenna | Cannot retune old antenna |
Section | Question | Response |
---|---|---|
Combiner for Shared Antenna | Do you need a Combiner for a Shared Antenna? | |
Type | ||
Number of channels supported | N/A | |
Frequencies of channels supported | N/A | |
Frequency | N/A | |
Do you need a combiner output splitter/switcher for dual feed lines? | N/A | |
Elbow Complex | Do you require the separate purchase of the Elbow Complex? | Yes |
Broadband or Single Channel? | Single Channel | |
Feed Line Size | 3 1/8 inches inches | |
Side Mount Brackets | Do you require the separate purchase of side mount brackets for a high power antenna? | No |
Pattern Scatter Analysis | Do you require separate purchase of pattern scatter analysis for a side mount high or medium power antenna? | No |
Sweep Test | Do you require the sweep testing of transmission line and antenna? | Yes |
Section | Question | Response |
---|---|---|
Transmission Line Related Expenses | Do you have transmission line related expenses? | Yes |
Section | Question | Response |
---|---|---|
Existing Transmission Line Description | Type of change | Purchase New |
Use | Primary (Main) | |
Description of Use | N/A | |
Ownership | Owned | |
Owner | N/A | |
Site | N/A | |
Is the existing transmission line shared with another station or stations? | No | |
Is Transmission Line in operating condition? | Yes | |
Existing Transmission Line Manufacturer and Type | Manufacturer | |
Type | Flexible Foam | |
Diameter | 1 5/8 inches | |
Other Diameter | N/A | |
Segment Length | N/A | |
Other Segment Length | N/A | |
Number of parallel runs | 1 | |
Length | 240 feet per run |
Section | Question | Response |
---|---|---|
New Transmission Line Costs | Use | Primary (Main) |
Description of Use | N/A | |
Change Type | Purchase New | |
Is this a request for upgraded equipment? | No | |
Type | Flexible Foam | |
Diameter | 1 5/8 inches | |
Other Diameter | N/A | |
Segment Length | N/A | |
Other Segment Length | N/A | |
Number of parallel runs | 1 | |
Length | 225 feet per run | |
Justification for New Transmission Line | required to stay on the air during transition |
Section | Question | Response |
---|---|---|
Tower Equipment or Rigging Costs Changes | Do you have tower equipment or rigging costs changes? | Yes |
Section | Question | Response |
---|---|---|
Existing Tower Description | Type of change | Construct New |
Tower Use | Primary (Main) | |
Description of Use | N/A | |
Ownership | Owned | |
Is this tower consider Complex? | No | |
Is this tower currently shared with any other stations? | No | |
One or more FM, AM or TV radio broadcaster(s) | N/A | |
Others Types of Users | N/A | |
Is tower documented for structural analysis? | Unknown | |
Is tower compliant with Rev G? | Unknown | |
Existing Tower Structure Registration | Do you have a tower registration number? | No |
ASR Number | ||
Coordinates (NAD83) | Latitude (NAD83) | 35° 14' 05.0" N- |
Longitude (NAD83) | 088° 22' 35.0" W- | |
Overall Structure Height | 198.00 feet | |
Support Structure Height | 198.00 feet | |
Ground Elevation Above Mean Sea Level (AMSL) | 609.00 feet | |
Structure Type | TOWER - Free Standing or Guyed Structure | |
Tower Owner | George Duncan | |
Date Constructed | 01/01/1996 |
Section | Question | Response |
---|---|---|
Construct New Tower | Use | Primary (Main) |
Description of Use | N/A | |
Is this a request for upgraded equipment? | No | |
Height | 298.00 feet | |
Justification for New Tower | required to remain on air during transition. |
Section | Question | Response |
---|---|---|
Tower Rigging Costs | Complex Tower | N/A |
Helicopter Services Required | Are helicopter services required? | No |
Name | Description |
---|---|
Installation of cable on tower |
Installation of 200 ft of cable |
Site Survey |
Site Survey for new tower and foundations. |
Freight and Sales Tax |
Freight and Sales Tax for tower steel |
Removal of old tower |
Dismantle old tower upon completion of facilities to new tower. |
Rigging of Antenna |
Installation of Antenna and ancillary antennas/dish |
Section | Question | Response |
---|---|---|
Outside Project Management Services | Do you require outside project management services? | Yes |
Number of Hours | 120 | |
Explanation | Project management to coordinate installing new tower, antenna, line and remove old tower. | |
Outside RF consulting Engineering Services | Perform engineering study for new channel assignment and antenna development | No |
Prepare engineering section of Form FCC Construction Permit Application | Yes | |
For Auxiliary Facility | No | |
For Main Facility | Yes | |
Prepare engineering section of Form FCC License to Cover Application | Yes | |
For Auxiliary Facility | No | |
For Main Facility | Yes | |
Prepare request for Special Temporary Authority | Yes | |
Quantity | 3 | |
Do you have Distributed Transmission System engineering services? | N/A | |
Critical Facility | N/A | |
Terrain-Shielded Facility | N/A | |
Attorney and Other Outside Consulting Services | Prepare and file Form FCC Construction Permit Application | No |
For Auxiliary Facility | N/A | |
For Main Facility | N/A | |
Prepare and file Form FCC License to Cover Application | No | |
For Auxiliary Facility | N/A | |
For Main Facility | N/A | |
Prepare request for Special Temporary Authority | No | |
Quantity | N/A | |
NEPA Section 106 environmental review | No | |
Environmental Assessment | No | |
ASR Modification | No | |
FAA Consultation (including preparation of FAA Form 7460) | No | |
Negotiation of Lease and other Matter for Shared Locations | No | |
Prepare or Review FCC Form 399 for Reimbursement | Yes | |
Address transition timing and coordination issues w/ other stations and wireless providers | Yes | |
RF Field Engineering Services | Comprehensive coverage verification via field study | No |
RF exposure measurements | No | |
Additional Field Engineering Service | Yes | |
Number of Days | 10 | |
Justification | Install, test, debug new transmitter and antenna, retire old equipment. |
Section | Question | Response |
---|---|---|
AM Pattern Disturbance | Is an Impact Study needed? | No |
Is Remediation needed? | No | |
Facility Expenses | Name | N/A |
Other Distributed Transmission System Expenses Not listed | N/A | |
Name | N/A | |
Is Notification of a Medical Facility required as a result of DTV broadcasting? | No | |
Permit and Filing Costs | Local Zoning | Yes |
Non-zoning permits | No | |
BLM or NFS Coordination | No | |
FCC Construction Permit Minor Change | Yes | |
FCC License to Cover Application | Yes | |
FCC Special Temporary Authority Application | Yes | |
Other Miscellaneous Expenses | Does this relocation require paying Disposal Costs (for equipment and other waste, net of any salvage value)? | Yes |
Does this relocation require Equipment Delivery or Handling Charges not otherwise included in individual item costs? | Yes | |
Does this relocation require Equipment Storage? | Yes | |
Does this relocation require the Development and Airing of an Announcement regarding an upcoming channel change? | Yes | |
Does this relocation require MVPD Notification of a Channel Change? | No |
Name | Description |
---|---|
Digital Encoder |
Not included as part of Transmitter |
STL |
STL link from studio to new transmitter building |
generator |
Generator for new building during transition |
internet and phone |
lines to new building |
site prep |
pad and gravel drive for new building |
Interior Wiring for new building |
interior wiring, receptacles, a/c and transmitter wiring, 200 amp service entrance |
1 58 90 deg elbow |
90 degree elbow 1 5/8 inch |
Description | Predetermined Cost Estimate |
Estimated Cost | Estimated Cost Justification | Actual Cost | Actual Cost Justification |
---|---|---|---|---|---|
Sub-total | $144,092.21 | $138,092.21 | N/A | $90,352.21 | N/A |
Total for all systems | $404,654.21 | $386,246.91 | N/A | $317,663.91 | N/A |
Primary Transmitter DTV-32 | $144,092.21 | $138,092.21 | $90,352.21 | ||
UHF - Air Cooled Solid State Transmitter 1 - 2.5 kW | $126,000.00 | $120,000.00 | N/A | $73,260.00 | N/A |
Other -- Building Addition Size: 400.0 | $7,826.66 | $7,826.66 | See GT Communications Building Quote Invoice.pdf for quote. | $7,826.66 | N/A |
Other -- HVAC Service Type: H Size:5 (Other) | $9,265.55 | $9,265.55 | Actual cost of 5 ton package unit with labor. Quote attached with Invoice SwanCOHVACQuote_Invoice Existing facility not large enough to house new transmitter, new cooling equipment required. | $9,265.55 | Actual cost. |
1.5" Rigid Conduit and Wiring | $500.00 | $500.00 | N/A | N/A | N/A |
Other Electrical Service: 200 amp service entrance | $500.00 | $500.00 | N/A | N/A | N/A |
Actual Information Description | File Name |
---|---|
UHF - Air Cooled Solid State Transmitter 1 - 2.5 kW | |
Other -- Building Addition Size: 400.0 | |
Other -- HVAC Service Type: H Size:5 (Other) | |
1.5" Rigid Conduit and Wiring | Information not provided. |
Other Electrical Service: 200 amp service entrance | Information not provided. |
Description | Predetermined Cost Estimate |
Estimated Cost | Estimated Cost Justification | Actual Cost | Actual Cost Justification |
---|---|---|---|---|---|
Sub-total | $40,630.00 | $13,101.00 | N/A | $13,101.00 | N/A |
Total for all systems | $404,654.21 | $386,246.91 | N/A | $317,663.91 | N/A |
Primary Antenna PSILP8OI | $40,630.00 | $13,101.00 | $13,101.00 | ||
Sweep test of existing antenna | $6,730.00 | $0.00 | See attachment: new W18BL SIDE MOUNT 090617.pdf | N/A | N/A |
UHF - Lower Power Side Mount, Class A One Station antenna -- basic | $26,300.00 | $13,101.00 | Actual antenna invoice cost | $13,101.00 | N/A |
Elbow complex, single channel, at antenna input, per 3 1/8. feedline (if needed) | $7,600.00 | $0.00 | N/A | N/A | N/A |
Actual Information Description | File Name |
---|---|
Sweep test of existing antenna | Information not provided. |
UHF - Lower Power Side Mount, Class A One Station antenna -- basic | |
Elbow complex, single channel, at antenna input, per 3 1/8. feedline (if needed) | Information not provided. |
Description | Predetermined Cost Estimate |
Estimated Cost | Estimated Cost Justification | Actual Cost | Actual Cost Justification |
---|---|---|---|---|---|
Sub-total | $5,400.00 | $3,502.89 | N/A | $3,502.89 | N/A |
Total for all systems | $404,654.21 | $386,246.91 | N/A | $317,663.91 | N/A |
Primary Transmission Line | $5,400.00 | $3,502.89 | $3,502.89 | ||
Flexible Foam Transmission Line - dielectric, 1 5/8" | $5,400.00 | $3,502.89 | N/A | $3,502.89 | N/A |
Actual Information Description | File Name |
---|---|
Flexible Foam Transmission Line - dielectric, 1 5/8" |
Description | Predetermined Cost Estimate |
Estimated Cost | Estimated Cost Justification | Actual Cost | Actual Cost Justification |
---|---|---|---|---|---|
Sub-total | $118,828.60 | $124,153.10 | N/A | $124,153.10 | N/A |
Total for all systems | $404,654.21 | $386,246.91 | N/A | $317,663.91 | N/A |
Primary Tower TOWER | $0.00 | $0.00 | $0.00 | ||
Primary Tower | $118,828.60 | $124,153.10 | $124,153.10 | ||
Freight and Sales Tax | $3,233.11 | $3,233.11 | Freight and Sales Tax for tower steel | $3,233.11 | N/A |
Rigging of Antenna | $3,000.00 | $3,000.00 | Installation of new Ch 32 antenna, move 911 antenna See EXCEL Tower Quote | $3,000.00 | N/A |
Removal of old tower | $16,575.00 | $16,575.00 | Dismantle old tower, see EXCEL Tower quote | $16,575.00 | N/A |
Installation of cable on tower | $2,000.00 | $2,000.00 | Install 200 ft of transmission line. See EXCEL Tower Quote | $2,000.00 | N/A |
Site Survey | $9,820.49 | $9,820.49 | Site Survey for placement of new tower foundation and guy wire foundations, building placement and coordination around existing tower. See ClearChoiceEng Site Survey Proposal.pdf | $9,820.49 | N/A |
Short Tower (less than 500') | $84,200.00 | $89,524.50 | Existing tower will not support a second antenna for the transition to the new channel. A new tower will be required to remain on the air during the transition. Updated 2020 cost. | $89,524.50 | N/A |
New tower | $0.00 | $0.00 | N/A | $0.00 | N/A |
Actual Information Description | File Name |
---|---|
Freight and Sales Tax | |
Rigging of Antenna | |
Removal of old tower | |
Installation of cable on tower | |
Site Survey | |
Short Tower (less than 500') | |
New tower | Information not provided. |
Description | Predetermined Cost Estimate |
Estimated Cost | Estimated Cost Justification | Actual Cost | Actual Cost Justification |
---|---|---|---|---|---|
Sub-total | $40,892.43 | $53,211.74 | N/A | $46,311.74 | N/A |
Total for all systems | $404,654.21 | $386,246.91 | N/A | $317,663.91 | N/A |
Outside Professional Services | $40,892.43 | $53,211.74 | $46,311.74 | ||
Prepare and or review reimbursement form | $2,630.00 | $4,901.31 | Actual cost for 399 submissions | $4,901.31 | N/A |
Additional Field Engineering Service, 10 Days | $5,787.43 | $5,787.43 | actual incurred cost | $5,787.43 | Includes office supplies, fuel, crew lodging actual cost |
Prepare request for Special Temporary Authorization | $6,150.00 | $2,000.00 | N/A | $1,600.00 | N/A |
Prepare engineering section of FCC Form 2100 (main), License to Cover Application | $1,580.00 | $1,500.00 | N/A | $500.00 | N/A |
Prepare engineering section of FCC Form 2100 (main), Construction Permit Application | $3,155.00 | $3,000.00 | N/A | N/A | N/A |
Address transition timing and coordination issues w/ other stations and wireless | $2,630.00 | $2,500.00 | N/A | $0.00 | N/A |
Project management of the transition | $18,960.00 | $33,523.00 | Actual Invoiced costs. | $33,523.00 | N/A |
Actual Information Description | File Name |
---|---|
Prepare and or review reimbursement form | |
Additional Field Engineering Service, 10 Days | |
Prepare request for Special Temporary Authorization | |
Prepare engineering section of FCC Form 2100 (main), License to Cover Application | |
Prepare engineering section of FCC Form 2100 (main), Construction Permit Application | Information not provided. |
Address transition timing and coordination issues w/ other stations and wireless | Information not provided. |
Project management of the transition |
Description | Predetermined Cost Estimate |
Estimated Cost | Estimated Cost Justification | Actual Cost | Actual Cost Justification |
---|---|---|---|---|---|
Sub-total | $54,810.97 | $54,185.97 | N/A | $40,242.97 | N/A |
Total for all systems | $404,654.21 | $386,246.91 | N/A | $317,663.91 | N/A |
Other Expenses | $54,810.97 | $54,185.97 | $40,242.97 | ||
1 58 90 deg elbow | $400.00 | $400.00 | required to exit top of transmitter through wall of building insufficient ceiling height to make bend | $0.00 | N/A |
Interior Wiring for new building | $6,859.32 | $6,859.32 | interior wiring for new building, a/c and 200 amp service, parts & labor. See GT Comm Building Quote Invoice.pdf | $6,859.32 | Building interior costs were not included when it was determined that a new building was required. |
site prep | $12,269.50 | $12,269.50 | Actual Costs Site Preparation | $12,269.50 | Actual cost site prep, fencing for tower and guy wires. |
internet and phone | $500.00 | $500.00 | N/A | N/A | N/A |
Develop and air announcement of upcoming channel change | $1,000.00 | $1,000.00 | N/A | $1,000.00 | N/A |
Equipment Storage | $100.00 | $100.00 | N/A | N/A | N/A |
Equipment Delivery and Handling Charges | $2,000.00 | $2,000.00 | Antenna Estimated shipping, see attachment: new W18BL SIDE MOUNT 090617.pdf | $72.00 | N/A |
Disposal Costs (for equipment and other waste, net of any salvage value) | $10,000.00 | $10,000.00 | Removal of old tower after repack, limited ground space requires co-mingling guy wires for new tower, unsafe if not removed. See attachment, TV18 Remove Old Tower Qoute.pdf | $5,000.00 | N/A |
generator | $9,247.15 | $9,247.15 | A new building is required due to limited space, the current generator will not support two buildings with transmitters and hvac during the repack, we would risk being off air during power a failure. See attachment LindseyGeneratorQuote.pdf. | $9,247.15 | Actual Cost for Generator |
STL | $8,100.00 | $8,100.00 | Cannot reuse old tower/transmitter/building, new building requires new STL from studio to transmitter in order to remain on the air during the transition. See attachment: GEORGE DUNCAN FIBER PROPOSAL 9-6-2017.pdf and Thor_Estimate_TV-18_2018-11-24.pdf | $3,300.00 | N/A |
Digital Encoder | $2,495.00 | $2,495.00 | Not included as part of transmitter, see attachment: Thor_Estimate_TV-18 pt2_2018-11-24.pdf | $2,495.00 | $2995 is the actual cost |
Local Zoning | $200.00 | $200.00 | N/A | N/A | N/A |
FCC Filing Fees - Special Temporary Authorization request | $195.00 | $190.00 | N/A | N/A | N/A |
FCC Filing Fees - Form 2100 license to cover application | $335.00 | $325.00 | N/A | N/A | N/A |
FCC Filing Fees - Form 2100 minor change CP application | $1,110.00 | $500.00 | Eng Exhibit re antenna change file Minor Change from SL-8 to PSILP8OI. | N/A | N/A |
Actual Information Description | File Name |
---|---|
1 58 90 deg elbow | Information not provided. |
Interior Wiring for new building | |
site prep | |
internet and phone | Information not provided. |
Develop and air announcement of upcoming channel change | |
Equipment Storage | Information not provided. |
Equipment Delivery and Handling Charges | |
Disposal Costs (for equipment and other waste, net of any salvage value) | |
generator | |
STL | |
Digital Encoder | |
Local Zoning | Information not provided. |
FCC Filing Fees - Special Temporary Authorization request | Information not provided. |
FCC Filing Fees - Form 2100 license to cover application | Information not provided. |
FCC Filing Fees - Form 2100 minor change CP application | Information not provided. |
Predetermined Cost Estimate |
Estimated Cost | Actual Cost | |
---|---|---|---|
Total for all systems | $404,654.21 | $386,246.91 | $317,663.91 |
Question | Response |
---|---|
The facility has ceased operating on its pre-auction channel. | Yes |
Construction of final facilities or all necessary modifications are complete. | Yes |
All receipts for reimbursement have been submitted no further costs are expected to be incurred. Note this will lock the Form 399 from further editing and begin close-out procedures with the Fund Administrator. | No |
Section | Question | Response |
---|---|---|
Submission of Estimated Expenses Statements | WILLFUL FALSE STATEMENTS ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503), AND ANY FALSE STATEMENTS COULD SUBJECT THIS ENTITY TO LIABILITY UNDER THE FALSE CLAIMS ACT. |
|
I declare, under penalty of perjury, that I am an authorized representative of the above-named applicant for the Authorization(s) specified above. | Susan Hansen Consultant 10/29/2020 |
Section | Question | Response |
---|---|---|
Submission of Final Allocation or Accounting Information Statements | WILLFUL FALSE STATEMENTS ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503), AND ANY FALSE STATEMENTS COULD SUBJECT THIS ENTITY TO LIABILITY UNDER THE FALSE CLAIMS ACT. |
|
I declare, under penalty of perjury, that I am an authorized representative of the above-named applicant for the Authorization(s) specified above. | George G. Duncan Applicant 10/29/2020 |