| Applicant | Address | Phone | Applicant Type | |
|---|---|---|---|---|
|
SPOKANE TELEVISION, INC. Doing Business As: SPOKANE TELEVISION, INC. |
Teddie A Gibbon 500 WEST BOONE AVENUE SPOKANE, WA 99201 United States |
+1 (509) 324-4000 | teddieg@kxly.com | Corporation |
| Applicant | Address | Phone | |
|---|---|---|---|
|
[Confidential] |
|
|
|
| Applicant | Address | Phone | |
|---|---|---|---|
|
Bill Vickery , CBTE . Corp Director of Engineering Morgan Murphy Media |
Bill Vickery PO Box 659 Pittsburg, KS 66762 United States |
+1 (417) 624-0233 | bvickery@koamtv.com |
| Question | Response |
|---|---|
| Will the station be sharing equipment with another broadcast television station or stations (e.g., a shared antenna, co-location on a tower, use of the same transmitter room, multiple transmitters feeding a combiner, etc.)? If yes, enter the facility ID's of the other stations and click 'prefill' to download those stations' licensing information. | Yes |
| Briefly describe transition plan | KMNZ-LD will be transitioning to its repack channel via a replacement transmitter and antenna. The community tower and shelter are owned by Idaho Public Television. IPTV has approved these alterations. |
| Section | Question | Response |
|---|---|---|
| Transmitter Related Expenses | Do you have transmitter related expenses? | Yes |
| Section | Question | Response |
|---|---|---|
| Existing Transmitter Description | Type of change | Purchase New |
| Use | Primary (Main) | |
| Ownership | Owned | |
| Is this transmitter currently shared with another station? | No | |
| Is this transmitter currently in operating condition? | Yes | |
| Existing Transmitter Manufacturer and Type | Manufacturer | |
| Model | MXI-201 | |
| Year | 2009 | |
| Type | Solid State | |
| Solid State Cooling | Air Cooled | |
| Solid State Power Capacity | .2 kW |
| Section | Question | Response |
|---|---|---|
| New Transmitter | Use | Primary (Main) |
| Change Type | Purchase New | |
| Is this a request for upgraded equipment? | Yes | |
| Manufacturer | ||
| Model | UAXTE-3P-C | |
| Transmitter Type | Solid State | |
| Solid State Cooling | Air Cooled | |
| Solid State Power capacity | 0.6 kW | |
| Justification for New Transmitter | Existing transmitter could not be retuned to repack channel 31. |
| Section | Question | Response |
|---|---|---|
| Other Transmitter Costs | ||
| Does the transmitter installation require a Transmitter Building Site Survey/Installation? | Yes | |
| Electrical Service | Service Entrance (3 phases 800A 208V) | No |
| Switchgear (industrial 800 amp) | No | |
| Transformer (480V) | No | |
| Rigid Conduit and Wiring | Yes | |
| Size | 1 inches | |
| Length | 18.0 feet | |
| Other Electrical Service | Yes | |
| Description | Breaker panel modifications | |
| HVAC Service | Does the replacement transmitter require HVAC Service? | No |
| Transmitter Building Addition/Modification or Leasehold Improvement | Does the Transmitter Building require an addition, modification, other leashold improvement? | No |
| Section | Question | Response |
|---|---|---|
| Antenna Related Expenses | Do you have antenna related expenses? | Yes |
| Section | Question | Response |
|---|---|---|
| Existing Antenna Description | Type of change | Purchase New |
| Antenna Use | Primary (Main) | |
| Ownership | Owned | |
| Is the existing antenna shared with another station or stations? | No | |
| Is the existing antenna directional? | Yes | |
| Is antenna in operating condition? | Yes | |
| Is antenna located on or in close proximity to an antenna farm? | No | |
| Existing Antenna Manufacturer and Type | ||
| Mounting | Top Mount | |
| Antenna position in stack | Top | |
| Polarization | Horizontal | |
| Type | Slotted Coaxial | |
| ERP: | 1.1 kW | |
| Manufacturer | ||
| Model | DIE 881-8 | |
| Year | 2009 |
| Section | Question | Response |
|---|---|---|
| New Antenna Description | Use | Primary (Main) |
| Change Type | Purchase New | |
| Ownership | Owned | |
| Is antenna shared? | No | |
| Is antenna directional? | Yes | |
| Will antenna be located on or in close proximity to an antenna farm? | No | |
| New Antenna Manufacturer and Types | ||
| Mounting | Top Mount | |
| Antenna position in stack | Not in Stack | |
| Polarization | Circular | |
| Type | Slotted Coaxial | |
| ERP: | 1.75 kW | |
| Manufacturer | ||
| Model | JASS-8/31SCC | |
| Year | 2018 | |
| Justification for New Antenna | Existing antenna could not be re-tuned to new repack channel. |
| Section | Question | Response |
|---|---|---|
| Elbow Complex | Do you require the separate purchase of the Elbow Complex? | No |
| Pattern Scatter Analysis | Do you require separate purchase of pattern scatter analysis for a side mount high or medium power antenna? | No |
| Sweep Test | Do you require the sweep testing of transmission line and antenna? | No |
| Name | Description |
|---|---|
Valmont |
Extension mounting pipe for new antenna |
| Section | Question | Response |
|---|---|---|
| Transmission Line Related Expenses | Do you have transmission line related expenses? | Yes |
| Section | Question | Response |
|---|---|---|
| Existing Transmission Line Description | Type of change | Utilize Existing |
| Use | Primary (Main) | |
| Ownership | Owned | |
| Is the existing transmission line shared with another station or stations? | No | |
| Is Transmission Line in operating condition? | Yes | |
| Existing Transmission Line Manufacturer and Type | Manufacturer | Andrew |
| Type | Flexible Air | |
| Diameter | 7/8 inches | |
| Number of parallel runs | 1 | |
| Length | 100 feet per run |
| Name | Description |
|---|---|
Talley |
(2) 7/8 inch EIA Flange connectors and (4) 3/8" Foam connectors |
| Section | Question | Response |
|---|---|---|
| Tower Equipment or Rigging Costs Changes | Do you have tower equipment or rigging costs changes? | No |
| Section | Question | Response |
|---|---|---|
| Outside Project Management Services | Do you require outside project management services? | No |
| Outside RF consulting Engineering Services | Perform engineering study for displacement application | Yes |
| Prepare engineering section of Form FCC Construction Permit Application | Yes | |
| For Auxiliary Facility | No | |
| For Main Facility | Yes | |
| Prepare engineering section of Form FCC License to Cover Application | No | |
| Prepare request for Special Temporary Authority | Yes | |
| Quantity | 1 | |
| Prepare Form 601 | No | |
| Attorney and Other Outside Consulting Services | Prepare and file Form FCC Construction Permit Application | Yes |
| For Auxiliary Facility | No | |
| For Main Facility | Yes | |
| Prepare and file Form FCC License to Cover Application | No | |
| Prepare request for Special Temporary Authority | Yes | |
| Quantity | 1 | |
| Negotiation of Lease and other Matter for Shared Locations | No | |
| Prepare or Review FCC Form 399 for Reimbursement | No | |
| Form 399 assistance or other program management costs | No | |
| RF Field Engineering Services | Comprehensive coverage verification via field study | No |
| RF exposure measurements | No | |
| Additional Field Engineering Service | No |
| Section | Question | Response |
|---|---|---|
| AM Pattern Disturbance | Is an Impact Study needed? | No |
| Is Remediation needed? | No | |
| Permit and Filing Costs | FCC Construction Permit Major Change | No |
| FCC Construction Permit Minor Change | Yes | |
| FCC License to Cover Application | Yes | |
| FCC Special Temporary Authority Application | Yes | |
| Other Miscellaneous Expenses | Does this relocation require paying Disposal Costs (for equipment and other waste, net of any salvage value)? | No |
| Does this relocation require Equipment Delivery or Handling Charges not otherwise included in individual item costs? | Yes | |
| Does this relocation require Equipment Storage? | No | |
| Point to Point Microwave (STL/ICR) | Frequency Coordination for Unidirection System | No |
| Frequency Coordination for Bi-Direction System | No | |
| New Point to Point Microwave System | No |
| Name | Description |
|---|---|
Harrington Tower Services, Inc. |
Removal of existing Ch 40 antenna, assembly of repack Ch 31 antenna, and tower work. |
| Description | Predetermined Cost Estimate |
Estimated Cost | Estimated Cost Justification | Actual Cost | Actual Cost Justification |
|---|---|---|---|---|---|
| Sub-total | $38,900.00 | $15,960.00 | N/A | $14,160.00 | N/A |
| Total for all systems | $80,606.50 | $57,324.00 | N/A | $17,040.00 | N/A |
| Primary Transmitter UAXTE-3P-C | $38,900.00 | $15,960.00 | $14,160.00 | ||
| 1" Rigid Conduit and Wiring | $100.00 | $100.00 | N/A | N/A | N/A |
| Other Electrical Service: Breaker panel modifications | $700.00 | $700.00 | N/A | N/A | N/A |
| Transmitter Building Site Survey/Installation | $10,000.00 | $1,000.00 | N/A | N/A | N/A |
| UHF - Air Cooled Solid State Transmitter 320 - 700 Watts | $28,100.00 | $14,160.00 | N/A | $14,160.00 | N/A |
| Actual Information Description | File Name |
|---|---|
| 1" Rigid Conduit and Wiring | Information not provided. |
| Other Electrical Service: Breaker panel modifications | Information not provided. |
| Transmitter Building Site Survey/Installation | Information not provided. |
| UHF - Air Cooled Solid State Transmitter 320 - 700 Watts |
| Description | Predetermined Cost Estimate |
Estimated Cost | Estimated Cost Justification | Actual Cost | Actual Cost Justification |
|---|---|---|---|---|---|
| Sub-total | $19,014.00 | $19,014.00 | N/A | $0.00 | N/A |
| Total for all systems | $80,606.50 | $57,324.00 | N/A | $17,040.00 | N/A |
| Primary Antenna JASS-8/31SCC | $19,014.00 | $19,014.00 | $0.00 | ||
| UHF-Low Power, Top Mount, Slotted Coaxial, 1.75kW input, Elliptical | $9,382.00 | $9,382.00 | ***System Notice: Estimate adjusted and locked because line has been superseded.*** | $0.00 | N/A |
| Valmont | $250.00 | $250.00 | N/A | N/A | N/A |
| UHF-Low Power, Top Mount, Slotted Coaxial, 1.75kW input, Circular | $9,382.00 | $9,382.00 | N/A | $0.00 | N/A |
| Actual Information Description | File Name |
|---|---|
| UHF-Low Power, Top Mount, Slotted Coaxial, 1.75kW input, Elliptical | |
| Valmont | Information not provided. |
| UHF-Low Power, Top Mount, Slotted Coaxial, 1.75kW input, Circular |
| Description | Predetermined Cost Estimate |
Estimated Cost | Estimated Cost Justification | Actual Cost | Actual Cost Justification |
|---|---|---|---|---|---|
| Sub-total | $4,000.00 | $4,000.00 | N/A | $0.00 | N/A |
| Total for all systems | $80,606.50 | $57,324.00 | N/A | $17,040.00 | N/A |
| Primary Transmission Line | $4,000.00 | $4,000.00 | $0.00 | ||
| Talley | $4,000.00 | $4,000.00 | N/A | N/A | N/A |
| Description | Predetermined Cost Estimate |
Estimated Cost | Estimated Cost Justification | Actual Cost | Actual Cost Justification |
|---|---|---|---|---|---|
| Sub-total | $10,442.50 | $10,100.00 | N/A | $2,880.00 | N/A |
| Total for all systems | $80,606.50 | $57,324.00 | N/A | $17,040.00 | N/A |
| Outside Professional Services | $10,442.50 | $10,100.00 | $2,880.00 | ||
| Prepare request for Special Temporary Authorization | $1,280.00 | $1,200.00 | N/A | $780.00 | N/A |
| Attorney Fees - Prepare and File FCC Form 2100 (main), Construction Permit Application | $3,025.00 | $3,000.00 | N/A | N/A | N/A |
| Prepare engineering section of FCC Form 2100 (main), Construction Permit Application | $2,102.50 | $2,100.00 | N/A | $1,260.00 | N/A |
| Attorney Fees - Prepare and File request for Special Temporary Authorization | $2,235.00 | $2,000.00 | N/A | N/A | N/A |
| Perform engineering study for displacement application | $1,800.00 | $1,800.00 | N/A | $840.00 | N/A |
| Actual Information Description | File Name |
|---|---|
| Prepare request for Special Temporary Authorization | |
| Attorney Fees - Prepare and File FCC Form 2100 (main), Construction Permit Application | Information not provided. |
| Prepare engineering section of FCC Form 2100 (main), Construction Permit Application | |
| Attorney Fees - Prepare and File request for Special Temporary Authorization | Information not provided. |
| Perform engineering study for displacement application |
| Description | Predetermined Cost Estimate |
Estimated Cost | Estimated Cost Justification | Actual Cost | Actual Cost Justification |
|---|---|---|---|---|---|
| Sub-total | $8,250.00 | $8,250.00 | N/A | $0.00 | N/A |
| Total for all systems | $80,606.50 | $57,324.00 | N/A | $17,040.00 | N/A |
| Other Expenses | $8,250.00 | $8,250.00 | $0.00 | ||
| Equipment Delivery and Handling Charges | $500.00 | $500.00 | N/A | N/A | N/A |
| FCC Filing Fees - Form 2100 minor change CP application | $1,110.00 | $1,110.00 | N/A | N/A | N/A |
| FCC Filing Fees - Form 2100 license to cover application | $335.00 | $335.00 | N/A | N/A | N/A |
| FCC Filing Fees - Special Temporary Authorization request | $305.00 | $305.00 | N/A | N/A | N/A |
| Harrington Tower Services, Inc. | $6,000.00 | $6,000.00 | N/A | N/A | N/A |
| Predetermined Cost Estimate |
Estimated Cost | Actual Cost | |
|---|---|---|---|
| Total for all systems | $80,606.50 | $57,324.00 | $17,040.00 |
| Question | Response |
|---|---|
| The facility has ceased operating on its pre-auction channel. | Yes |
| Construction of final facilities or all necessary modifications are complete. | Yes |
| All receipts for reimbursement have been submitted no further costs are expected to be incurred. Note this will lock the Form 399 from further editing and begin close-out procedures with the Fund Administrator. | No |
| Section | Question | Response |
|---|---|---|
| Submission of Estimated Expenses Statements | WILLFUL FALSE STATEMENTS ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503), AND ANY FALSE STATEMENTS COULD SUBJECT THIS ENTITY TO LIABILITY UNDER THE FALSE CLAIMS ACT. |
|
| I declare, under penalty of perjury, that I am an authorized representative of the above-named applicant for the Authorization(s) specified above. | Bill Vickery Corp. Director of Engineering 09/22/2020 |
| Section | Question | Response |
|---|---|---|
| Submission of Actual Cost Documentation Statements | WILLFUL FALSE, FRAUDULENT, OR FICTITIOUS STATEMENTS ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISIONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503), AND ANY FALSE AND/OR FRAUDULENT STATEMENTS COULD SUBJECT THIS ENTITY TO LIABILITY UNDER THE FALSE CLAIMS ACT (U.S. CODE, TITLE 31, SECTIONS 3729-3733). |
|
| I declare, under penalty of perjury, that I am an authorized representative of the above-named applicant for the Authorization(s) specified above. | Bill Vickery Corp. Director of Engineering 09/22/2020 |
| Section | Question | Response |
|---|---|---|
| Submission of Final Allocation or Accounting Information Statements | WILLFUL FALSE STATEMENTS ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503), AND ANY FALSE STATEMENTS COULD SUBJECT THIS ENTITY TO LIABILITY UNDER THE FALSE CLAIMS ACT. |
|
| I declare, under penalty of perjury, that I am an authorized representative of the above-named applicant for the Authorization(s) specified above. | Bill Vickery Corp. Director of Engineering 09/22/2020 |
