Go to the Federal Communications Commission homepage at www.fcc.gov

FCC Form 399: Reimbursement Request

Approved by OMB 3060-1178
Go to the Federal Communications Commission homepage at www.fcc.gov

(REFERENCE COPY - Not for submission) FCC Form 399: Reimbursement Request

Facility ID:
22211
Service:
DTV
Call Sign:
WFLD
Channel:
31 (UHF)
File Number:
0000027829
FRN:
0005795067
Date Submitted:
11/07/2019

Applicant Information

Back to Top

Applicant Name, Type, and Contact Information

Applicant Address Phone Email Applicant Type

FOX TELEVISION STATIONS, LLC

Joseph M. Di Scipio

400 N. CAPITOL STREET, NW

SUITE 890

WASHINGTON, DC 20001

United States

+1 (202) 824-6522 JDISCIPIO@21CF.COM Limited Liability Company

Reimbursement Contact Information

Reimbursement Contact Name and Information

Applicant Address Phone Email

[Confidential]

 

 

 


Preparer Contact Information

Back to Top

Preparer Contact Name and Information

Applicant Address Phone Email

Dennis Wallace

Managing Partner

Meintel, Sgrignoli & Wallace, LLC

Dennis Wallace

1282 Smallwood Drive

Suite 372

Waldorf, MD 20603

United States

+1 (202) 251-7589 Dennis.Wallace@mswdtv.com

Broadcaster Information and Transition Plan

Back to Top
Question Response
Will the station be sharing equipment with another broadcast television station or stations (e.g., a shared antenna, co-location on a tower, use of the same transmitter room, multiple transmitters feeding a combiner, etc.)? If yes, enter the facility ID's of the other stations and click 'prefill' to download those stations' licensing information. Yes
Briefly describe transition plan Due to the complexity of this project and number of facilities involved, WFLD will install interim facilities at the John Hancock building, while existing antenna, transmission line, and transmitter are replaced at the main site on top of Willis Tower.

Transmitters

Back to Top
Section Question Response
Transmitter Related Expenses Do you have transmitter related expenses? Yes

Primary Transmitter

Back to Top

Existing Transmitter Information

Section Question Response
Existing Transmitter Description Type of change Purchase New
Use Primary (Main)
Description of Use N/A
Ownership Owned
Owner N/A
Site N/A
Is this transmitter currently shared with another station? No
Is this transmitter currently in operating condition? Yes
Existing Transmitter Manufacturer and Type Manufacturer
Model CD2200P3
Year 1999
Type Inductive Output Tube
IOT Power Type Three
Power Capacity 75 kW

Primary Transmitter

Back to Top

New Transmitter Costs

Section Question Response
New Transmitter Use Primary (Main)
Change Type Purchase New
Is this a request for upgraded equipment? No
Manufacturer
Model THU-40 Evo
Transmitter Type Solid State
Solid State Cooling Liquid Cooled
Solid State Power capacity 61 kW
Justification for New Transmitter New transmitter required as existing unit is obsolete and no longer supported by manufacturer. Existing transmitter is rated 75KW. See quote 190725_Quotation 155506.1.WFLD.Main and narrative 190725_WFLD_NARRATIVE_REV3_FORM399

Primary Transmitter

Back to Top

Other Transmitter Costs

Section Question Response
Electrical Service Service Entrance (3 phases 800A 208V) No
Switchgear (industrial 800 amp) Yes
Transformer (480V) No
Power N/A
Rigid Conduit and Wiring Yes
Size 3 inches
Length 400.0 feet
Other Electrical Service Yes
Description Transmitter Electrical Installation Costs Willis Tower
HVAC Service Does the replacement transmitter require HVAC Service? Yes
Type Cooling Only
Size 50 tons
Other Size N/A
Transmitter Building Addition/Modification or Leasehold Improvement Does the Transmitter Building require an addition, modification, other leashold improvement? Yes
Size 1000.0 square feet
Channel 14 Costs Is an RF Consulting Engineer needed? N/A
Is a channel 14 Mask Filer needed? N/A
Is additional field engineering time needed? N/A
Number of Days N/A

Primary Transmitter

Back to Top

Other Transmitter Cost Not Listed

Name Description

Water Glycol System

Building Chilled Water System Connection. (ZonaTherm)

Additional Transmitter RF Components

Plumbing, RF and switch components. See quote 190725_Quotation 230209.2 WFLD.Addtnl Install Parts

Site Survey and Drawings

Pre-installation survey of transmitter facility with drawings. See 190823 Quote Land Communications.

Installation

Installation of transmitter. See estimate 190823 Quote Land Communications

Plumbing Demolition

Disconnect Piping for transmitter (Great Lakes)

Remote Control Wiring

Wire up existing remote control to new transmitter

Remove Existing Main Transmitter

Remove existing main transmitter from Willis Tower

ThermoFlo Leibert system

ThermoFlo Leibert Installation

Interim Transmitter

Back to Top

New Transmitter Costs

Section Question Response
New Transmitter Use Interim
Description of Use N/A
Change Type Purchase
Manufacturer
Model THU9-24 EVO
Transmitter Type Solid State
Solid State Cooling Liquid Cooled
Solid State Power capacity 37 kW
Justification for New Transmitter Interim transmitter will be required to operate interim facilities at Hancock building while changing out antennas and transmitter at main facility, Willis Tower.

Interim Transmitter

Back to Top

Other Transmitter Costs

Section Question Response
Electrical Service Service Entrance (3 phases 800A 208V) No
Switchgear (industrial 800 amp) No
Transformer (480V) No
Power N/A
Rigid Conduit and Wiring No
Size N/A
Length N/A
Other Electrical Service No
Description N/A
HVAC Service Does the replacement transmitter require HVAC Service? No
Type N/A
Size N/A
Other Size N/A
Transmitter Building Addition/Modification or Leasehold Improvement Does the Transmitter Building require an addition, modification, other leashold improvement? Yes
Size 500.0 square feet
Channel 14 Costs Is an RF Consulting Engineer needed? N/A
Is a channel 14 Mask Filer needed? N/A
Is additional field engineering time needed? N/A
Number of Days N/A
Inside RF System Is an additional interior RF system required to support this interim transmitter? No

Interim Transmitter

Back to Top

Other Transmitter Cost Not Listed

Name Description

Offloading

Offloading of transmitter and heat exchanger on ground and move to 97th floor.

RF Components

Additional transmitter components required to interconnect to combiner

Transmitter retuning

Retuning cost for transmitter from ch. 31 to ch. 24

Main and backup STL

Studio to Transmitter Link. Main link is fiber and backup is radio

Combiner connection

Facilitation by antenna/combiner owner (ATC) to connect into their system.

Monitoring Equipment

Equipment needed to ensure signal and RF compliance with Rules.

Second Mask filer

Second mask filter to allow operation on channel 31 (pre-repack)

Transmitter Site Survey

Survey by transmitter vendor to plan installation

Antennas

Back to Top
Section Question Response
Antenna Related Expenses Do you have antenna related expenses? Yes

Auxiliary Antenna

Back to Top

Existing Antenna Information

Section Question Response
Existing Antenna Description Type of change Purchase New
Antenna Use Auxiliary (Backup)
Description of Use Licensed Aux Antenna
Ownership Leased
Owner Willis Tower
Site N/A
Is the existing antenna shared with another station or stations? Yes
Is the existing antenna directional? Yes
Is antenna in operating condition? Yes
Is antenna located on or in close proximity to an antenna farm? Yes
Existing Antenna Manufacturer and Type Class Full Power
Mounting Top Mount
Antenna position in stack Bottom
Polarization Circular
Type Broadband Panel
Number of Stations Supported 3
Number of Panels 24
Design power capacity in use 100.0 %
Lower Limit 572.00 MHz
Upper Limit 578.00 MHz
Other Antenna Type N/A
ERP: 475.0 kW
Manufacturer
Model PHP24C
Year 1999

Facility ID's and Call Signs of all stations with whom the antenna is shared.

Facility ID Call Sign
32334 WJYS
22211 WFLD
47905 WMAQ-TV

Auxiliary Antenna

Back to Top

New Antenna Costs

Section Question Response
New Antenna Description Use Auxiliary (Backup)
Description of Use Aux Antenna
Change Type Purchase New
Is this a request for upgraded equipment? No
Ownership Leased
Owner Willis Tower
Is antenna shared? Yes
Is antenna directional? Yes
Will antenna be located on or in close proximity to an antenna farm? Yes
New Antenna Manufacturer and Types Class Full Power
Mounting Top Mount
Antenna position in stack Bottom
Polarization Elliptical
Type Broadband Panel
Number of Stations Supported 3
Number of Panels/Bays 24
Lower Limit 470.00 MHz
Upper Limit 600.00 MHz
Design power capacity in use 100.0 %
Other Antenna Type N/A
ERP: 475.0 kW
Manufacturer
Model PHP-24C
Year 2018
Justification for New Antenna Lessor moving WFLD to a different Aux Antenna on top of building. Quote reflects cost of provisioning combiner and removal of former aux antenna facilities. See 190725_Willis Tower Repack Engineering Statement R4 07112017 page 10

Auxiliary Antenna

Back to Top

Other Antenna Costs

Section Question Response
Combiner for Shared Antenna Do you need a Combiner for a Shared Antenna? Yes
Type New
Number of channels supported 3
Frequencies of channels supported RF channel
Frequency N/A
Do you need a combiner output splitter/switcher for dual feed lines? No
Elbow Complex Do you require the separate purchase of the Elbow Complex? No
Broadband or Single Channel? N/A
Feed Line Size N/A
Side Mount Brackets Do you require the separate purchase of side mount brackets for a high power antenna?
Pattern Scatter Analysis Do you require separate purchase of pattern scatter analysis for a side mount high or medium power antenna? No
Sweep Test Do you require the sweep testing of transmission line and antenna? No

Enter a list of RF channel numbers.

RF Channel Number
21
24
29

Auxiliary Antenna

Back to Top

Other Antenna Cost Not Listed

Information not provided.

Primary Antenna

Back to Top

Existing Antenna Information

Section Question Response
Existing Antenna Description Type of change Purchase New
Antenna Use Primary (Main)
Description of Use N/A
Ownership Owned
Owner N/A
Site N/A
Is the existing antenna shared with another station or stations? No
Is the existing antenna directional? Yes
Is antenna in operating condition? Yes
Is antenna located on or in close proximity to an antenna farm? Yes
Existing Antenna Manufacturer and Type Class Full Power
Mounting Top Mount
Antenna position in stack Middle
Polarization Elliptical
Type Slotted Coaxial
Number of Stations Supported N/A
Number of Panels N/A
Design power capacity in use N/A
Lower Limit N/A
Upper Limit N/A
Other Antenna Type N/A
ERP: 1000.0 kW
Manufacturer
Model ATW14H3H-ETC2-31H
Year 1999

Primary Antenna

Back to Top

New Antenna Costs

Section Question Response
New Antenna Description Use Primary (Main)
Description of Use N/A
Change Type Purchase New
Is this a request for upgraded equipment? No
Ownership Owned
Owner N/A
Is antenna shared? No
Is antenna directional? Yes
Will antenna be located on or in close proximity to an antenna farm? Yes
New Antenna Manufacturer and Types Class Full Power
Mounting Top Mount
Antenna position in stack Top
Polarization Elliptical
Type Slotted Coaxial
Number of Stations Supported N/A
Number of Panels/Bays N/A
Lower Limit N/A
Upper Limit N/A
Design power capacity in use N/A
Other Antenna Type N/A
ERP: 1000.0 kW
Manufacturer
Model TFU-14ETT/VP-R C210
Year 2019
Justification for New Antenna New antenna required for new channel. Slot antenna. See quotes 190725_700427CMZ-1 WFLD FOX and 190725_900032CMZ WFLD FOX

Primary Antenna

Back to Top

Other Antenna Costs

Section Question Response
Combiner for Shared Antenna Do you need a Combiner for a Shared Antenna?
Type
Number of channels supported N/A
Frequencies of channels supported N/A
Frequency N/A
Do you need a combiner output splitter/switcher for dual feed lines? N/A
Elbow Complex Do you require the separate purchase of the Elbow Complex? Yes
Broadband or Single Channel? Single Channel
Feed Line Size 6 1/8 inches inches
Side Mount Brackets Do you require the separate purchase of side mount brackets for a high power antenna?
Pattern Scatter Analysis Do you require separate purchase of pattern scatter analysis for a side mount high or medium power antenna? No
Sweep Test Do you require the sweep testing of transmission line and antenna? Yes

Primary Antenna

Back to Top

Other Antenna Cost Not Listed

Name Description

West Tower Stack Project

Willis Tower West Tower Stack Project per Willis Spreadsheet. See 190725_Willis Tower Repack Engineering Statement R4 07112017 page 12

Southwest Pole Decommissioning

Willis Tower Decommissioning of SW Pole. per Willis Tower. See 190725_Willis Tower Repack Engineering Statement R4 07112017Spreadsheet. page 13

Transmission Line

Back to Top
Section Question Response
Transmission Line Related Expenses Do you have transmission line related expenses? Yes

Auxiliary Transmission Line

Back to Top

Existing Transmission Line

Section Question Response
Existing Transmission Line Description Type of change Purchase New
Use Auxiliary (Backup)
Description of Use Licensed Aux
Ownership Leased
Owner Willis Tower
Site N/A
Is the existing transmission line shared with another station or stations? Yes
Is Transmission Line in operating condition? Yes
Existing Transmission Line Manufacturer and Type Manufacturer
Type Rigid
Diameter 6 1/8 inches
Other Diameter N/A
Segment Length 20 inches
Other Segment Length N/A
Number of parallel runs 2
Length 400 feet per run

Facility ID's and Call Signs of all stations with whom the transmission line is shared.

Facility ID Call Sign
32334 WJYS
47905 WMAQ-TV

Auxiliary Transmission Line

Back to Top

New Transmission Line

Section Question Response
New Transmission Line Costs Use Auxiliary (Backup)
Description of Use Licensed Aux
Change Type Purchase New
Is this a request for upgraded equipment? No
Type Rigid
Diameter 6 1/8 inches
Other Diameter N/A
Segment Length 19 3/4 inches
Other Segment Length N/A
Number of parallel runs 2
Length 400 feet per run
Justification for New Transmission Line Replacement of Aux Antenna Transmission Line. The new Aux Combiner will be in a new location within the building and will require new transmission line.

Auxiliary Transmission Line

Back to Top

Other Transmission Line Expenses Not Listed

Name Description

Transmission Line Layout

Develop Transmission line layout and installation drawings for Aux Antenna.

Primary Transmission Line

Back to Top

Existing Transmission Line

Section Question Response
Existing Transmission Line Description Type of change Purchase New
Use Primary (Main)
Description of Use N/A
Ownership Owned
Owner N/A
Site N/A
Is the existing transmission line shared with another station or stations? No
Is Transmission Line in operating condition? Yes
Existing Transmission Line Manufacturer and Type Manufacturer
Type Rigid
Diameter 8 3/16 inches
Other Diameter N/A
Segment Length 20 inches
Other Segment Length N/A
Number of parallel runs 1
Length 400 feet per run

Primary Transmission Line

Back to Top

New Transmission Line

Section Question Response
New Transmission Line Costs Use Primary (Main)
Description of Use N/A
Change Type Purchase New
Is this a request for upgraded equipment? No
Type Rigid
Diameter 7 3/16 inches
Other Diameter N/A
Segment Length 19 3/4 inches
Other Segment Length N/A
Number of parallel runs 1
Length 300 feet per run
Justification for New Transmission Line Current Transmission line does not extend to the top of the west tower and it routed to the top of the SW Pole Outrigger. The New Antenna location requires new transmission line. However, applicant will re-use as much as possible of the existing line.

Primary Transmission Line

Back to Top

Other Transmission Line Expenses Not Listed

Name Description

Transmission Line Layout Installation Drawings

Develop and play transmission line layout and installation drawings. See attached Quote.

Tower Equipment And Rigging Costs

Back to Top
Section Question Response
Tower Equipment or Rigging Costs Changes Do you have tower equipment or rigging costs changes? Yes

Primary Tower

Back to Top

Existing Tower

Section Question Response
Existing Tower Description Type of change Modify Existing
Tower Use Primary (Main)
Description of Use N/A
Ownership Leased
Is this tower consider Complex? Located on Building
Is this tower currently shared with any other stations? Yes
One or more FM, AM or TV radio broadcaster(s) Yes
Others Types of Users Yes
Is tower documented for structural analysis? Yes
Is tower compliant with Rev G? No
Existing Tower Structure Registration Do you have a tower registration number? Yes
ASR Number 1032959
Coordinates (NAD83) Latitude (NAD83) 41° 52' 44.1" N-
Longitude (NAD83) 087° 38' 10.2" W-
Overall Structure Height 1729.97 feet
Support Structure Height 1435.35 feet
Ground Elevation Above Mean Sea Level (AMSL) 595.14 feet
Structure Type BTWR - Building with Tower
Tower Owner 233 Broadcast, LLC
Date Constructed 01/01/2002

FM, AM or TV radio broadcasters. Facility ID's, Call Signs and Services of other broadcast stations with whom the tower is shared

Facility ID Call Sign Service
32334 WJYS DTV
9617 WBBM-TV DTV
12498 WGBO-DT DTV
28621 WJMK FM
71425 WWME-CD DTV
9613 WBBM-FM FM
10802 WTTW DTV
73228 WLS-FM FM
72115 WGN-TV DTV
53971 WEBG FM
60539 WXFT-DT DTV
10981 WCPX-TV DTV
51165 WGCI-FM FM
6377 WTMX FM
74178 WKSC-FM FM
73226 WLS-TV DTV
22211 WFLD DTV
71283 WCFS-FM FM
10801 WFMT FM
47905 WMAQ-TV DTV
48772 WPWR-TV DTV
70042 WLIT-FM FM

Other Types of Users

Users
Willis Tower
Microwave
Two Way

Primary Tower

Back to Top

Tower Modification Costs

Section Question Response
Engineering Study Please what type of engineering study is required, if any: Study needed for tower with candelabra
Tower Reinforcements Please select whether tower reinforcements are needed: Serious Reinforcements needed

Primary Tower

Back to Top

Tower Rigging Costs

Section Question Response
Tower Rigging Costs Complex Tower Located on Building
Helicopter Services Required Are helicopter services required? Yes

Primary Tower

Back to Top

Other Tower Expenses Not Listed

Information not provided.

Interim Tower

Back to Top

Tower Construction Costs

Section Question Response
Construct New Tower Use Interim
Description of Use N/A
Height 425.20 feet
Justification for New Tower This is an existing structure (John Hancock building) that will be used to support the interim antenna.

Interim Tower

Back to Top

Tower Rigging Costs

Section Question Response
Tower Rigging Costs Complex Tower Located on Building
Helicopter Services Required Are helicopter services required? No

Interim Tower

Back to Top

Other Tower Expenses Not Listed

Name Description

Tower mapping and structural study

Analyze and design modifications to existing structure to accommodate interim antenna. See 190823 Quote American Tower.

Structural modifications

Material and labor to modify existing structure to accommodate interim antenna. See 190823 Quote American Tower.

Outside Professional Services Costs

Back to Top
Section Question Response
Outside Project Management Services Do you require outside project management services? Yes
Number of Hours 1500
Explanation Outside Project Management to coordinate with Willis Tower, Antenna, Helicopter, Rigging, and Transmitter Replacements.
Outside RF consulting Engineering Services Perform engineering study for new channel assignment and antenna development Yes
Prepare engineering section of Form FCC Construction Permit Application Yes
For Auxiliary Facility Yes
For Main Facility Yes
Prepare engineering section of Form FCC License to Cover Application Yes
For Auxiliary Facility Yes
For Main Facility Yes
Prepare request for Special Temporary Authority Yes
Quantity 2
Do you have Distributed Transmission System engineering services? N/A
Critical Facility N/A
Terrain-Shielded Facility N/A
Attorney and Other Outside Consulting Services Prepare and file Form FCC Construction Permit Application Yes
For Auxiliary Facility Yes
For Main Facility Yes
Prepare and file Form FCC License to Cover Application Yes
For Auxiliary Facility Yes
For Main Facility Yes
Prepare request for Special Temporary Authority Yes
Quantity 2
NEPA Section 106 environmental review No
Environmental Assessment No
ASR Modification No
FAA Consultation (including preparation of FAA Form 7460) No
Negotiation of Lease and other Matter for Shared Locations Yes
Prepare or Review FCC Form 399 for Reimbursement Yes
Address transition timing and coordination issues w/ other stations and wireless providers Yes
RF Field Engineering Services Comprehensive coverage verification via field study Yes
RF exposure measurements Yes
Additional Field Engineering Service Yes
Number of Days 45
Justification On Site RF Engineering to supervise equipment installation, performance measurements, and compliance with project requirements.

Outside Professional Services Costs

Back to Top

Other Professional Services Expenses Not Listed

Name Description

Prepare and File FCC Progress Reports

Prepare and File FCC Progress Reports

Other Expenses

Back to Top
Section Question Response
AM Pattern Disturbance Is an Impact Study needed? No
Is Remediation needed? No
Facility Expenses Name N/A
Other Distributed Transmission System Expenses Not listed N/A
Name N/A
Is Notification of a Medical Facility required as a result of DTV broadcasting? Yes
Permit and Filing Costs Local Zoning Yes
Non-zoning permits Yes
BLM or NFS Coordination No
FCC Construction Permit Minor Change Yes
FCC License to Cover Application Yes
FCC Special Temporary Authority Application Yes
Other Miscellaneous Expenses Does this relocation require paying Disposal Costs (for equipment and other waste, net of any salvage value)? Yes
Does this relocation require Equipment Delivery or Handling Charges not otherwise included in individual item costs? Yes
Does this relocation require Equipment Storage? Yes
Does this relocation require the Development and Airing of an Announcement regarding an upcoming channel change? Yes
Does this relocation require MVPD Notification of a Channel Change? Yes

Other Expenses

Back to Top

Other Expenses Not Listed

Name Description

Illinois and Chicago Sales Tax

Estimated Sales tax on equipment.

Cost Information

Back to Top

Transmitters

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate
Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $6,710,396.59 $5,487,368.90 N/A $2,407,638.01 N/A
Total for all systems $13,324,932.59 $10,762,216.57 N/A $2,777,117.41 N/A
Interim Transmitter THU9-24 EVO $3,428,853.39 $2,765,924.70 $1,744,237.51
Main and backup STL $47,564.32 $47,564.32 To get Audio and Video from Studio to the transmitter. Main is fiber, backup is radio. See Quote 190725_Studio Transmitter Redundant $11,326.75 N/A
Transmitter Site Survey $20,125.00 $20,125.00 Transmitter Site Survey and drawings for installation. See quote 190725_Quotation 112453.0.WFLD(FOX).Aux.SiteSurvpdf $10,062.50 N/A
Second Mask filer $63,465.00 $63,465.00 Second mask filter to provide operation on ch. 31 pre-repack channel during construction at Willis Tower. See quote 190725_Quotation 162173.2.WFLD(FOX).Second Filter N/A N/A
Monitoring Equipment $90,476.74 $90,476.74 To monitor and confirm FCC Rule compliance. See Quotes in 190725_Transmitter RF and AV Monitoring $11,518.00 N/A
Combiner connection $1,026,550.00 $1,026,550.00 Charge to connect transmitter into combiner and antenna system owned by others. See cost breakout in quote 190725_Transmitter to Antenna Integration $769,912.50 N/A
Transmitter retuning $12,500.00 $12,500.00 Retuning of transmitter from ch 31 pre-repack to ch 24 post-repack See quote 190725_WFLD THU Rechannel 19028R N/A N/A
RF Components $35,517.00 $35,517.00 Additional Transmitter parts required to connect transmitter. See quote 190725_R&S Quote Interim Transmission line for Hancock N/A N/A
Offloading $30,160.00 $30,160.00 Offload transmitter and heat exchanger on ground and move to 97th. floor. $30,160.00 N/A
UHF - Liquid Cooled Solid State Transmitter 35 - 50 kW $1,473,000.00 $810,071.31 See attached quote 190725_Quotation 110499.1.WFLD(FOX).Interim Main $410,098.15 N/A
Other -- Building Addition Size: 500.0 $629,495.33 $629,495.33 Comprehensive room provisioning includes electrical, demolition, transformer, general construction, permits, design and HVAC, See quote 190725_Transmitter Room Construction $501,159.61 N/A
Primary Transmitter THU-40 Evo $3,281,543.20 $2,721,444.20 $663,400.50
ThermoFlo Leibert system $360,000.00 $360,000.00 ThermoFlo Quote Attached. Leibert Units Installation at Willis Tower N/A N/A
Remove Existing Main Transmitter $180,025.00 $180,025.00 Quote to remove existing equipment. Beam Supplies, HE Glycol, Etc. Down Elevator. Rigging, Labor Overtime on Weekends/Nights. See attached quote 190725_Willis Tower Phase II. Does not include disposal. N/A N/A
Remote Control Wiring $3,600.00 $3,600.00 Wire up existing remote control to new transmitter. See attached vendor quote. N/A N/A
Plumbing Demolition $13,220.00 $13,220.00 Plumbing Demolition. Pipefitter Scope. Quote Attached. N/A N/A
Installation $58,000.00 $58,000.00 Installation of transmitter. See quote 190823 Quote Land Communications for detail $29,000.00 N/A
Site Survey and Drawings $26,000.00 $26,000.00 Pre-installation site survey with drawings. See 190823 Quote Land Communications for detail. $13,000.00 N/A
Additional Transmitter RF Components $94,648.20 $94,648.20 Plumbing, RF and switching components. See quote 190725_Quotation 230209.2 WFLD.Addtnl Install Parts N/A N/A
Water Glycol System $75,750.00 $75,750.00 ZonaTherm Quote attached. Water/Glycol System N/A N/A
Other -- Building Addition Size: 1000.0 $250,000.00 $250,000.00 Modifications to building space for new transmitter. Willis Tower Building. See quote 190725_20190108 WFLD-Osborn Fee Proposal for design services. Job is out for bid and we are expecting the contractors services to use the balance. $1,650.00 N/A
50 Ton system $172,500.00 $164,000.00 Modifications to HVAC/Mechanical Systems Willis Tower Building N/A N/A
Other Electrical Service: Transmitter Electrical Installation Costs Willis Tower $200,800.00 $200,800.00 Estimate based on verbal discussions. Quote is forthcoming and will be entered when received. N/A N/A
3" Rigid Conduit and Wiring (Cost per foot) $20,800.00 $19,600.00 Catalog N/A N/A
Switchgear - industrial 800 amp $38,200.00 $36,300.00 Catalog N/A N/A
UHF - Liquid Cooled Solid State Transmitter 52 - 61 kW $1,788,000.00 $1,239,501.00 See quote 190725_Quotation 155506.1.WFLD.Main $619,750.50 N/A

Components

Actual Information Description File Name
Main and backup STL

Component Description:
Integrated Microwave Technologies cables and clamps for STL
Amount:
$3,005.01

Component Description:
STL failover switch
Amount:
$3,896.74

Component Description:
Partial payment for STL and GPS antenna install
Amount:
$4,425.00
Transmitter Site Survey

Component Description:
Partial invoice for interim transmitter pre-install survey
Amount:
$10,062.50
Second Mask filer Information not provided.
Monitoring Equipment

Component Description:
ASI/SDI monitoring equipment
Amount:
$3,123.00

Component Description:
RF Signal Analyzer (monitoring equipment)
Amount:
$8,395.00
Combiner connection

Component Description:
Interconnect into RF plant including antenna. Milestone payment 1.
Amount:
$256,637.50

Component Description:
Interconnect into RF plant including antenna. Milestone payment 2.
Amount:
$513,275.00
Transmitter retuning Information not provided.
RF Components Information not provided.
Offloading

Component Description:
Partial payment for off loading transmitter to 97th. floor Willis bldg.
Amount:
$13,000.00

Component Description:
Offloading transmitters at Willis. Not all components arrived on time, additional time was needed to offload. See invoice named '2019-08-27 Krueger Broadcast Services Inc - 830 - $13,000.00.pdf' for detail.
Amount:
$4,160.00

Component Description:
Partial payment for off loading transmitter to 97th. floor Willis bldg.
Amount:
$13,000.00
UHF - Liquid Cooled Solid State Transmitter 35 - 50 kW

Component Description:
Partial payment for interim transmitter
Amount:
$410,098.15
Other -- Building Addition Size: 500.0

Component Description:
Partial payment for general construction services at Hancock site.
Amount:
$21,167.90

Component Description:
General construction services at Hancock site. Partial payment.
Amount:
$325,273.76

Component Description:
Architectural Design Services for Hancock Building. Please disregard amount shown in the invoice file name.
Amount:
$7,610.25

Component Description:
Architectural Design Services for Hancock Building
Amount:
$1,275.00

Component Description:
Architectural Design Services for Hancock Building
Amount:
$9,647.50

Component Description:
Architectural Design Services for Hancock Building
Amount:
$8,734.44

Component Description:
Architectural Design Services for Hancock Building
Amount:
$10,243.50

Component Description:
Partial payment general construction services at Hancock Bldg.
Amount:
$103,051.20

Component Description:
Architectural Design Services for Hancock Building
Amount:
$9,801.66

Component Description:
Architectural Design Services for Hancock Building
Amount:
$4,354.40
ThermoFlo Leibert system Information not provided.
Remove Existing Main Transmitter Information not provided.
Remote Control Wiring Information not provided.
Plumbing Demolition Information not provided.
Installation

Component Description:
50 percent down payment for transmitter installation
Amount:
$29,000.00
Site Survey and Drawings

Component Description:
50 percent down payment for transmitter site survey and drawing package
Amount:
$13,000.00
Additional Transmitter RF Components Information not provided.
Water Glycol System Information not provided.
Other -- Building Addition Size: 1000.0

Component Description:
Architectural Design Services for Willis Tower Building
Amount:
$1,650.00
50 Ton system Information not provided.
Other Electrical Service: Transmitter Electrical Installation Costs Willis Tower Information not provided.
3" Rigid Conduit and Wiring (Cost per foot) Information not provided.
Switchgear - industrial 800 amp Information not provided.
UHF - Liquid Cooled Solid State Transmitter 52 - 61 kW

Component Description:
Down payment for main transmitter
Amount:
$619,750.50

Cost Information

Back to Top

Antennas

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate
Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $2,927,480.00 $3,338,041.67 N/A $306,645.65 N/A
Total for all systems $13,324,932.59 $10,762,216.57 N/A $2,777,117.41 N/A
Primary Antenna TFU-14ETT/VP-R C210 $2,843,280.00 $2,873,875.00 $306,645.65
Southwest Pole Decommissioning $1,110,500.00 $1,110,500.00 Willis Tower Spreadsheet. WFLD Allocated costs of project per Willis Tower Engineering Statement attached. See See 190725_Willis Tower Repack Engineering Statement R4 07112017Spreadsheet. page 13 N/A N/A
West Tower Stack Project $1,424,250.00 $1,424,250.00 Willis Tower Triple Destack and Double Stack per attached spreadsheet from Willis Tower and attached Willis Tower Engineering Statement. See 190725_Willis Tower Repack Engineering Statement R4 07112017 page 12 $35,162.45 N/A
Elbow complex, single channel, at antenna input, per 6 1/8. feedline (if needed) $12,300.00 $10,984.00 Within quote 190725_700427CMZ-1 WFLD FOX $9,885.60 N/A
Sweep test of existing antenna $6,730.00 $6,400.00 Within quote 190725_700427CMZ-1 WFLD FOX $5,760.00 N/A
UHF - High Power Top Mount (200-1000 kW), One station antenna , elliptically or circularly polarized $289,500.00 $321,741.00 Custom Three Station Stack Antenna designed for Willis Tower Building West Pylon. This antenna will require special structural design. See quotes 190725_700427CMZ-1 WFLD FOX and 190725_900032CMZ WFLD FOX $255,837.60 N/A
Auxiliary Antenna PHP-24C $84,200.00 $464,166.67 $0.00
New combiner, cost per channel (without antenna) $84,200.00 $464,166.67 Willis Tower Aux Combiner / East Tower per Willis Tower Spreadsheet. See 190725_Willis Tower Repack Engineering Statement R4 07112017 page 10. N/A N/A
UHF - High Power Top Mount Three Station broadband panel antenna elliptically or circularly polarized $0.00 $0.00 N/A N/A N/A

Components

Actual Information Description File Name
Southwest Pole Decommissioning Information not provided.
West Tower Stack Project

Component Description:
West Tower Stack work. See 190725_Willis Tower Repack Engineering Statement R4 07112017 page 12
Amount:
$1,934.07

Component Description:
West Tower Stack work. See 190725_Willis Tower Repack Engineering Statement R4 07112017 page 12
Amount:
$9,171.44

Component Description:
Osborn Engineering work on West Stack project.
Amount:
$8,967.65

Component Description:
Osborn Engineering West Stack work.
Amount:
$5,010.90

Component Description:
Osborn Engineering West Stack project work
Amount:
$2,100.00

Component Description:
West Tower Stack work. See 190725_Willis Tower Repack Engineering Statement R4 07112017 page 12
Amount:
$7,978.39
Elbow complex, single channel, at antenna input, per 6 1/8. feedline (if needed)

Component Description:
Partial payment for elbow complex
Amount:
$4,942.80

Component Description:
Partial payment for Elbows
Amount:
$4,942.80
Sweep test of existing antenna

Component Description:
2nd Partial payment for antenna sweep
Amount:
$2,880.00

Component Description:
Partial payment for antenna sweep
Amount:
$2,880.00
UHF - High Power Top Mount (200-1000 kW), One station antenna , elliptically or circularly polarized

Component Description:
2nd. Partial payment for antenna and parts. Includes change order which has been uploaded.
Amount:
$144,783.45

Component Description:
Partial payment for antenna and associated parts
Amount:
$111,054.15
New combiner, cost per channel (without antenna) Information not provided.
UHF - High Power Top Mount Three Station broadband panel antenna elliptically or circularly polarized Information not provided.

Cost Information

Back to Top

Transmission Line

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate
Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $308,600.00 $450,000.00 N/A $0.00 N/A
Total for all systems $13,324,932.59 $10,762,216.57 N/A $2,777,117.41 N/A
Primary Transmission Line $122,000.00 $250,000.00 $0.00
Rigid Transmission Line - copper, 7 3/16" $87,000.00 $215,000.00 Custom Transmission line fabrication required. Each section will need to be a custom made section length in order to fit within the existing hallways and vertical shafts within Willis Tower. Standard Line section costs is not applicable. N/A N/A
Transmission Line Layout Installation Drawings $35,000.00 $35,000.00 Develop transmission line layout and installation drawings. See attached vendor quote. N/A N/A
Auxiliary Transmission Line $186,600.00 $200,000.00 $0.00
Rigid Transmission Line - copper, 6 1/8" $161,600.00 $175,000.00 Custom transmission line fabrication required. Each line section will need to be custom made based upon CAD drawings in order to fit within the existing hallway and vertical shafts within the Willis Tower Building. Standard line sections will not fit. N/A N/A
Transmission Line Layout $25,000.00 $25,000.00 Develop transmission line layout and installation drawings. See attached vendor quote. N/A N/A

Components

Information not provided.

Cost Information

Back to Top

Tower Equipment and Rigging Costs

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate
Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $1,954,300.00 $40,300.00 N/A $40,300.00 N/A
Total for all systems $13,324,932.59 $10,762,216.57 N/A $2,777,117.41 N/A
Primary Tower BTWR $1,493,000.00 $0.00 $0.00
Complex Tower (includes, for example, those with candelabras and/or stacked antennas) $421,000.00 $0.00 See attached Willis Tower Spreadsheet and Engineering Statement. N/A N/A
Tower Helicopter Lift $0.00 $0.00 See attached Willis Tower Engineering Statement and Spreadsheet. N/A N/A
Serious tower reinforcement/modifications $1,052,000.00 $0.00 See attached Willis Tower spreadsheet and engineering statement. N/A N/A
Structural engineering tower load study for a documented tower with candelabra $20,000.00 $0.00 See attached Willis Tower Engineering Statement. N/A N/A
Interim Tower $461,300.00 $40,300.00 $40,300.00
New tower $0.00 $0.00 N/A N/A N/A
Structural modifications $30,000.00 $30,000.00 Structural modifications to structure. See attached quote 190823 Quote American Tower. $30,000.00 N/A
Complex Tower (includes, for example, those with candelabras and/or stacked antennas) $421,000.00 $0.00 N/A N/A N/A
Tower mapping and structural study $10,300.00 $10,300.00 Interim structure mapping and structural analysis. See quote 190823 Quote American Tower. $10,300.00 N/A

Components

Actual Information Description File Name
Complex Tower (includes, for example, those with candelabras and/or stacked antennas) Information not provided.
Tower Helicopter Lift Information not provided.
Serious tower reinforcement/modifications Information not provided.
Structural engineering tower load study for a documented tower with candelabra Information not provided.
New tower Information not provided.
Structural modifications

Component Description:
Interim tower structural work
Amount:
$30,000.00
Complex Tower (includes, for example, those with candelabras and/or stacked antennas) Information not provided.
Tower mapping and structural study

Component Description:
Interim tower analysis and mapping
Amount:
$10,300.00

Cost Information

Back to Top

Outside Professional Services

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate
Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $521,175.00 $544,130.00 N/A $15,333.75 N/A
Total for all systems $13,324,932.59 $10,762,216.57 N/A $2,777,117.41 N/A
Outside Professional Services $521,175.00 $544,130.00 $15,333.75
Additional Field Engineering Service, 45 Days $95,400.00 $95,400.00 See attached vendor quote. On Site RF Engineering for complex project. Supervision of installation and commissioning of new systems. $15,333.75 N/A
Prepare and or review reimbursement form $2,630.00 $2,500.00 Catalog N/A N/A
Project management of the transition $237,000.00 $225,000.00 Very large scope project management. N/A N/A
Prepare request for Special Temporary Authorization $4,100.00 $3,000.00 Catalog N/A N/A
Prepare and File FCC Progress Reports $34,980.00 $34,980.00 Prepare and File FCC Progress Reports. See attached vendor quote. N/A N/A
RF Exposure Measurements $21,050.00 $20,000.00 Catalog N/A N/A
Comprehensive coverage verification via field study, if needed $84,200.00 $80,000.00 Catalog N/A N/A
Attorney Fees - Prepare and File request for Special Temporary Authorization $7,360.00 $7,000.00 Catalog N/A N/A
Attorney Fees - Negotiation of lease and other matters for shared locations $4,210.00 $35,000.00 Willis Tower Building Lease Modifications N/A N/A
Attorney Fees -Prepare and File FCC Form 2100 (main), License to Cover Application $2,365.00 $2,250.00 Catalog N/A N/A
Attorney Fees - Aux Antenna, prepare and File Form 2100 Construction Permit or License Application $4,210.00 $4,000.00 Catalog N/A N/A
Attorney Fees - Prepare and File FCC Form 2100 (main), Construction Permit Application $5,260.00 $5,000.00 Catalog N/A N/A
RF Consulting Engineer Fees- Aux Antenna: Prepare engineering section of FCC Form 2100, License to Cover Application $1,580.00 $1,500.00 Catalog N/A N/A
Prepare engineering section of FCC Form 2100 (main), License to Cover Application $1,580.00 $1,500.00 Catalog N/A N/A
RF Consulting Engineer Fees- Aux Antenna: Prepare engineering section of FCC Form 2100, Construction Permit Application $2,105.00 $2,000.00 Catalog N/A N/A
Prepare engineering section of FCC Form 2100 (main), Construction Permit Application $3,155.00 $3,000.00 Catalog N/A N/A
Perform engineering study for new channel assignment and antenna development $7,360.00 $7,000.00 Catalog N/A N/A
Address transition timing and coordination issues w/ other stations and wireless $2,630.00 $15,000.00 Coordination for Chicago Market and Willis Tower Building Testing and Transition End Dates N/A N/A

Components

Actual Information Description File Name
Additional Field Engineering Service, 45 Days

Component Description:
RF Consulting Services for WFLD.
Amount:
$15,333.75
Prepare and or review reimbursement form Information not provided.
Project management of the transition Information not provided.
Prepare request for Special Temporary Authorization Information not provided.
Prepare and File FCC Progress Reports Information not provided.
RF Exposure Measurements Information not provided.
Comprehensive coverage verification via field study, if needed Information not provided.
Attorney Fees - Prepare and File request for Special Temporary Authorization Information not provided.
Attorney Fees - Negotiation of lease and other matters for shared locations Information not provided.
Attorney Fees -Prepare and File FCC Form 2100 (main), License to Cover Application Information not provided.
Attorney Fees - Aux Antenna, prepare and File Form 2100 Construction Permit or License Application Information not provided.
Attorney Fees - Prepare and File FCC Form 2100 (main), Construction Permit Application Information not provided.
RF Consulting Engineer Fees- Aux Antenna: Prepare engineering section of FCC Form 2100, License to Cover Application Information not provided.
Prepare engineering section of FCC Form 2100 (main), License to Cover Application Information not provided.
RF Consulting Engineer Fees- Aux Antenna: Prepare engineering section of FCC Form 2100, Construction Permit Application Information not provided.
Prepare engineering section of FCC Form 2100 (main), Construction Permit Application Information not provided.
Perform engineering study for new channel assignment and antenna development Information not provided.
Address transition timing and coordination issues w/ other stations and wireless Information not provided.

Cost Information

Back to Top

Other Expenses

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate
Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $902,981.00 $902,376.00 N/A $7,200.00 N/A
Total for all systems $13,324,932.59 $10,762,216.57 N/A $2,777,117.41 N/A
Other Expenses $902,981.00 $902,376.00 $7,200.00
Illinois and Chicago Sales Tax $512,500.00 $512,500.00 Estimated Chicago and Illinois Sales Tax on Equipment. The sales tax rate in the City of Chicago is 10.25%. Total Estimated Sales Tax on equipment at the 10.25% rate. N/A N/A
MVPD Notification of Channel Change $5,000.00 $5,000.00 N/A N/A N/A
Develop and air announcement of upcoming channel change $1,500.00 $1,500.00 N/A N/A N/A
Equipment Storage $56,791.00 $56,791.00 Transmitter Storage off site until needed on site. See quotes 190725_Quotation 170275.3.WFLD.Main.Consolidation for main and 190725_Quotation 170264.3.WFLD(FOX).Int.Consolidation for interim N/A N/A
Equipment Delivery and Handling Charges $250,000.00 $250,000.00 Delivery and Logistics for Equipment to Willis Tower Building. Elevator and Freight Dock Considerations. Special elevator lifts. See attached rate sheet from Willis Tower Building Management. $7,200.00 N/A
Disposal Costs (for equipment and other waste, net of any salvage value) $45,000.00 $45,000.00 Disposal of Glycol, Transformer Oil, Old Antenna, etc. from Willis Tower Building. N/A N/A
Non-zoning permits $19,000.00 $19,000.00 Building Permits, Electrical, and Mechanicals. Willis Tower Building City of Chicago N/A N/A
FCC Filing Fees - Special Temporary Authorization request $195.00 $190.00 Catalog N/A N/A
FCC Filing Fees - Form 2100 license to cover application $335.00 $325.00 N/A N/A N/A
FCC Filing Fees - Form 2100 minor change CP application $1,110.00 $1,070.00 Catalog N/A N/A
DTV Medical Facility Notification $11,550.00 $11,000.00 Catalog N/A N/A
Local Zoning $0.00 $0.00 N/A N/A N/A

Components

Actual Information Description File Name
Illinois and Chicago Sales Tax Information not provided.
MVPD Notification of Channel Change Information not provided.
Develop and air announcement of upcoming channel change Information not provided.
Equipment Storage Information not provided.
Equipment Delivery and Handling Charges

Component Description:
2nd partial payment for antenna shipping.
Amount:
$3,600.00

Component Description:
Partial payment for antenna shipping
Amount:
$3,600.00
Disposal Costs (for equipment and other waste, net of any salvage value) Information not provided.
Non-zoning permits Information not provided.
FCC Filing Fees - Special Temporary Authorization request Information not provided.
FCC Filing Fees - Form 2100 license to cover application Information not provided.
FCC Filing Fees - Form 2100 minor change CP application Information not provided.
DTV Medical Facility Notification Information not provided.
Local Zoning Information not provided.

Cost Information

Back to Top

Grand Total

Predetermined
Cost Estimate
Estimated Cost Actual Cost
Total for all systems $13,324,932.59 $10,762,216.57 $2,777,117.41

Reimbursement Status

Back to Top
Question Response
The facility has ceased operating on its pre-auction channel. No
Construction of final facilities or all necessary modifications are complete. No
All receipts for reimbursement have been submitted no further costs are expected to be incurred. Note this will lock the Form 399 from further editing and begin close-out procedures with the Fund Administrator. No

Certification

Back to Top
Section Question Response
Submission of Estimated Expenses Statements

WILLFUL FALSE STATEMENTS ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503), AND ANY FALSE STATEMENTS COULD SUBJECT THIS ENTITY TO LIABILITY UNDER THE FALSE CLAIMS ACT.

  1. The Authorized Person signing below certifies that he/she is authorized to submit this TV Broadcaster Relocation Fund Reimbursement Form on behalf of the above-named entity.

  2. The above-named entity acknowledges that all certifications and attached documentation are considered material representations.

  3. The above-named entity acknowledges the submission of the information herein creates no obligation on the part of the government to pay any amount.

  4. The above-named entity certifies that the equipment and services paid for with money from the TV Broadcaster Relocation Fund are necessary to change channels (broadcasters) or to continue to carry the signal of a broadcaster that changes channels (MVPD).

  5. The above-named entity certifies that all payments from the TV Broadcaster Relocation Fund (Fund) received by the entity listed on this form will be used only for expenses that are eligible for reimbursement from the Fund.

  6. The above-named entity certifies that it will maintain and provide to the Commission detailed records, including receipts, of all costs eligible for reimbursement actually incurred.

  7. The above-named entity acknowledges that overpayments or payments in error must be promptly refunded to the Commission.

  8. The above-named entity certifies that it is in full compliance with all statutes, rules, regulations and governmental requirements for which compliance is a pre-requisite for obtaining the payments herein requested.

I declare, under penalty of perjury, that I am an authorized representative of the above-named applicant for the Authorization(s) specified above.

Angelo Servedio

Vice President Controller


11/07/2019

Certification

Back to Top
Section Question Response
Submission of Actual Cost Documentation Statements

WILLFUL FALSE, FRAUDULENT, OR FICTITIOUS STATEMENTS ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISIONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503), AND ANY FALSE AND/OR FRAUDULENT STATEMENTS COULD SUBJECT THIS ENTITY TO LIABILITY UNDER THE FALSE CLAIMS ACT (U.S. CODE, TITLE 31, SECTIONS 3729-3733).

  1. The Authorized Person signing below certifies and represents that he/she is authorized to submit this TV Broadcaster Relocation Fund Reimbursement Form on behalf of the above-named entity.

  2. The above-named entity certifies that the statements in this form and attached documentation are true, complete, and correct.

  3. The above-named entity acknowledges that all certifications and attached documentation are considered material representations.

  4. The above-named entity acknowledges the submission of the information herein creates no obligation on the part of the government to pay any amount.

  5. The above-named entity certifies that the equipment and services paid for with money from the TV Broadcaster Relocation Fund are necessary to change channels (full power and Class A stations) and/or otherwise modify a television station’s facility as a result of the spectrum repack (LPTV/TV Translator stations); or to minimize service disruption resulting from a repacked television station (FM stations); or to continue to carry the signal of a broadcaster that changes channels (MVPD) .

  6. The above-named entity certifies that all payments from the TV Broadcaster Relocation Fund (Fund) received by the entity listed on this form will be used only for expenses that are eligible for reimbursement from the Fund.

  7. The above-named entity certifies that the cost information/documents submitted reflect costs actually incurred.

  8. The above-named entity acknowledges that overpayments or payments in error must be promptly refunded to the Commission.

  9. The above-named entity certifies that it is in full compliance with all statutes, rules, regulations and governmental requirements for which compliance is a prerequisite for obtaining the payments herein requested.

I declare, under penalty of perjury, that I am an authorized representative of the above-named applicant for the Authorization(s) specified above.

Angelo Servedio

Vice President Controller


11/07/2019

Attachments

Back to Top