Go to the Federal Communications Commission homepage at www.fcc.gov

FCC Form 399: Incentive Auction Relocation Reimbursement Fund System

Approved by OMB 3060-1178
Go to the Federal Communications Commission homepage at www.fcc.gov

(REFERENCE COPY - Not for submission)FCC Form 399: Incentive Auction Relocation Reimbursement Fund System

File Number:
0000027107
FRN:
0001590330
Facility ID:
25577
Repack Channel:
28 (UHF)
Entity:
Broadcaster
Filing Status:
Submitted
Date Submitted:
02/08/2019

Applicant Information

Back to Top

Applicant Name, Type, and Contact Information

Applicant Address Phone Email Applicant Type

GULF-CALIFORNIA BROADCAST COMPANY

Doing Business As: News-Press & Gazette Company

825 Edmond St.

Saint Joseph, MO 64501

United States

+1 (816) 271-8505 tim.hannan@npgco.com Corporation

Reimbursement Contact Information

Reimbursement Contact Name and Information

Applicant Address Phone Email

[Confidential]

 

 

 


Preparer Contact Information

Back to Top

Preparer Contact Name and Information

Applicant Address Phone Email

The Preparer is same as the reimbursement contact.

 

 

 

Broadcaster Information and Transition Plan

Back to Top
Question Response
Will the station be sharing equipment with another broadcast television station or stations (e.g., a shared antenna, co-location on a tower, use of the same transmitter room, multiple transmitters feeding a combiner, etc.)? If yes, enter the facility ID's of the other stations and click 'prefill' to download those stations' licensing information. Yes
Briefly describe transition plan PERFORM STRUCTURAL ON TOWER AND REINFORCE TOWER AS NEEDED TO MEET REV-G. INSTALL TEMPORARY ANTENNA AND CONNECT EXISTING TRANSMITTER. REMOVE TRANSMISSION SYSTEM AND REPLACE WITH NEW ONE. SWEEP AND TEST SYSTEM. REMOVE OLD TRANSMITTER AFTER CUT OVER.

Transmitters

Back to Top
Section Question Response
Transmitter Related Expenses Do you have transmitter related expenses? Yes

Primary Transmitter

Back to Top

Existing Transmitter Information

Section Question Response
Existing Transmitter Description Type of change Purchase New
Use Primary (Main)
Description of Use  
Ownership Owned
Owner  
Site  
Is this transmitter currently shared with another station? No
Is this transmitter currently in operating condition? Yes
Existing Transmitter Manufacturer and Type Manufacturer
Model LX2000
Year 2005
Type Solid state
IOT Power Type  
Description  
Power capacity  
Solid State Cooling Air
Solid State Power Capacity 2 kw
Other Transmitter Type  

Primary Transmitter

Back to Top

New Transmitter Costs

Section Question Response
New Transmitter Use Primary (Main)
Description of Use  
Change Type Purchase New
Is this a request for upgraded equipment? Yes
Manufacturer
Model ULXTE-16
Transmitter Type Solid state
IOT Power Type  
Other  
Power capacity  
Solid State Cooling Liquid
Solid State Power Capacity 10.8 kw
Other Transmitter Type  
Justification for New Transmitter UBS, WHICH OWNS THE IP FORMERLY HELD BY THE MANUFACTURER (AXCERA, WHICH NO LONGER EXISTS), HAS INDICATED THAT THE EXISTING TRANSMITTER CANNOT PRODUCE THE NECESSARY POWER TO MEET THE NEW LICENSE, AND IT MUST BE REPLACED.

Primary Transmitter

Back to Top

Other Transmitter Costs

Section Question Response
Electrical Service Service Entrance (3 phases 800A 208V) Yes
Switchgear (industrial 800 amp) No
Transformer (480V) No
Power
Rigid Conduit and Wiring No
Size
Length
Other Electrical Service No
Description  
HVAC Service Does the replacement transmitter require HVAC Service? No
Type
Size
Other Size  
Transmitter Building Addition/Modification or Leasehold Improvement Does the Transmitter Building require an addition, modification, other leashold improvement? No
Size
Channel 14 Costs Is an RF Consulting Engineer needed?
Is a channel 14 Mask Filer needed?
Is additional field engineering time needed?
Number of Days  

Primary Transmitter

Back to Top

Other Transmitter Cost Not Listed

Information not provided.

Antennas

Back to Top
Section Question Response
Antenna Related Expenses Do you have antenna related expenses? Yes

Primary Antenna

Back to Top

Existing Antenna Information

Section Question Response
Existing Antenna Description Type of change Purchase New
Antenna Use Primary (Main)
Description of Use N/A
Ownership Owned
Owner N/A
Site N/A
Is the existing antenna shared with another station or stations? No
Is the existing antenna directional? Yes
Is antenna in operating condition? Yes
Is antenna located on or in close proximity to an antenna farm? Yes
Existing Antenna Manufacturer and Type Class Full Power
Mounting Top-mount single
Antenna position in stack Top
Polarization Elliptical
Type Slotted coaxial
Number of Stations Supported N/A
Number of Panels N/A
Design power capacity in use N/A
Lower Limit N/A
Upper Limit N/A
Other Antenna Type N/A
ERP: 42.00 kW
Manufacturer
Model SFN-2030-D-1
Year 2005

Primary Antenna

Back to Top

New Antenna Costs

Section Question Response
New Antenna Description Use Primary (Main)
Description of Use N/A
Change Type Purchase New
Is this a request for upgraded equipment? Yes
Ownership Owned
Owner N/A
Is antenna shared? Yes
Is antenna directional? Yes
Will antenna be located on or in close proximity to an antenna farm? Yes
New Antenna Manufacturer and Type Class Full Power
Mounting Side-mount
Antenna position in stack Not in Stack
Polarization Elliptical
Type Broadband Slot
Number of Stations Supported 4
Number of Panels/Bays 8
Lower Limit 470.00 MHz
Upper Limit 700.00 MHz
Design power capacity in use 50.0 %
Other Antenna Type N/A
ERP: 42.00 kW
Manufacturer
Model SBB-E-8C170
Year 2018
Justification for New Antenna EXISTING ANTENNA TUNED TO CHANNEL 42 AND CANNOT BE TUNED TO NEW FREQUENCY. MUST REPLACE WITH NEW ANTENNA ON ASSIGNED FREQUENCY.

Primary Antenna

Back to Top

Other Antenna Costs

Section Question Response
Combiner for Shared Antenna Do you need a Combiner for a Shared Antenna? Yes
Type New
Number of channels supported 4
Frequencies of channels supported RF channel
Frequency N/A
Do you need a combiner output splitter/switcher for dual feed lines? No
Elbow Complex Do you require the separate purchase of the Elbow Complex? No
Broadband or Single Channel? N/A
Feed Line Size N/A
Side Mount Brackets Do you require the separate purchase of side mount brackets for a high power antenna? No
Pattern Scatter Analysis Do you require separate purchase of pattern scatter analysis for a side mount high or medium power antenna? No
Sweep Test Do you require the sweep testing of transmission line and antenna? Yes

Enter a list of RF channel numbers.

RF Channel Number
28
18
20
33

Primary Antenna

Back to Top

Other Antenna Cost Not Listed

Information not provided.

Interim Antenna

Back to Top

New Antenna Costs

Section Question Response
New Antenna Description Use Interim
Description of Use N/A
Change Type Purchase New
Ownership Owned
Owner N/A
Is antenna shared? Yes
Is antenna directional? Yes
Will antenna be located on or in close proximity to an antenna farm? Yes
New Antenna Manufacturer and Type Class Class A
Mounting Side-mount
Antenna position in stack Not in Stack
Polarization Horizontal
Type Broadband Panel
Number of Stations Supported 2
Number of Panels/Bays 8
Lower Limit 470.00 MHz
Upper Limit 872.00 MHz
Design power capacity in use 50.0 %
Other Antenna Type N/A
ERP: 20.80 kW
Manufacturer
Model 750 10402
Year 2018
Justification for New Antenna INTERIM ANTENNA IS REQUIRED TO FACILITATE ONGOING OPERATIONS AS TOWER WORK, NEW FEED LINE AND NEW ANTENNA IS INSTALLED.

Interim Antenna

Back to Top

Other Antenna Costs

Section Question Response
Combiner for Shared Antenna Do you need a Combiner for a Shared Antenna? Yes
Type New
Number of channels supported 2
Frequencies of channels supported RF channel
Frequency N/A
Do you need a combiner output splitter/switcher for dual feed lines? No
Elbow Complex Do you require the separate purchase of the Elbow Complex? No
Broadband or Single Channel? N/A
Feed Line Size N/A
Side Mount Brackets Do you require the separate purchase of side mount brackets for a high power antenna? No
Pattern Scatter Analysis Do you require separate purchase of pattern scatter analysis for a side mount high or medium power antenna? No
Sweep Test Do you require the sweep testing of transmission line and antenna? Yes

Enter a list of RF channel numbers.

RF Channel Number
42
39

Interim Antenna

Back to Top

Other Antenna Cost Not Listed

Information not provided.

Transmission Line

Back to Top
Section Question Response
Transmission Line Related Expenses Do you have transmission line related expenses? Yes

Primary Transmission Line

Back to Top

Existing Transmission Line

Section Question Response
Existing Transmission Line Description Type of change Purchase New
Use Primary (Main)
Description of Use N/A
Ownership Owned
Owner N/A
Site N/A
Is the existing transmission line shared with another station or stations? No
Is Transmission Line in operating condition? Yes
Existing Transmission Line Manufacturer and Type Manufacturer
Type Rigid
Diameter 3 1/8 inches
Segment Length 19 ½ '
Other Segment Length
Number of parallel runs 1
Length 160 feet per run

Primary Transmission Line

Back to Top

New Transmission Line

Section Question Response
New Transmission Line Costs Use Primary (Main)
Description of Use N/A
Change Type Purchase New
Is this a request for upgraded equipment? Yes
Type Flexible Air
Diameter 3 inches
Segment Length N/A
Other Segment Length
Number of parallel runs 1
Length 130 feet per run
Justification for New Transmission Line EXISTING RIGID LINE DOES NOT SUPPORT THE NEWLY ASSIGNED FREQUENCY.

Primary Transmission Line

Back to Top

Other Transmission Line Expenses Not Listed

Information not provided.

Interim Transmission Line

Back to Top

New Transmission Line

Section Question Response
New Transmission Line Costs Use Interim
Description of Use N/A
Change Type Purchase New
Type Flexible Air
Diameter 1 5/8 inches
Segment Length N/A
Other Segment Length
Number of parallel runs 1
Length 200 feet per run
Justification for New Transmission Line NEED BACK UP LINE AS EXISTING LINES WILL BE REMOVED AND NEW RIGID LINE WILL BE INSTALLED. INTERIM ANTENNA NEEDS TO OPERATE WHILE NEW ANTENNA SYSTEM IS INSTALLED AND TESTED.

Interim Transmission Line

Back to Top

Other Transmission Line Expenses Not Listed

Information not provided.

Tower Equipment And Rigging Costs

Back to Top
Section Question Response
Tower Equipment or Rigging Costs Changes Do you have tower equipment or rigging costs changes? Yes

Primary Tower

Back to Top

Existing Tower

Section Question Response
Existing Tower Description Type of change Modify Existing
Tower Use Primary (Main)
Description of Use N/A
Ownership Owned
Is this tower consider Complex? No
Is this tower currently shared with any other stations? Yes
One or more FM, AM or TV radio broadcaster(s) Yes
Others Types of Users No
Is tower documented for structural analysis? Unknown
Is tower compliant with Rev G? No
Existing Tower Structure Registration Do you have a tower registration number? Yes
ASR Number 1220472
Coordinates (NAD83) Latitude (NAD83) 33° 51' 58.1" N-
Longitude (NAD83) 116° 26' 05.0" W-
Overall Structure Height 88.91 feet
Support Structure Height 60.04 feet
Ground Elevation Above Mean Sea Level (AMSL) 1555.10 feet
Structure Type TOWER - Free Standing or Guyed Structure
Tower Owner Gulf-California Broadcast Co
Date Constructed 09/23/1968

FM, AM or TV radio broadcasters. Facility ID's, Call Signs and Services of other broadcast stations with whom the tower is shared

Facility ID Call Sign Service
51207 KDFX-CD DTV

Primary Tower

Back to Top

Tower Modification Costs

Section Question Response
Engineering Study Please what type of engineering study is required, if any: Study needed for undocumented/poorly documented tower
Tower Reinforcements Please select whether tower reinforcements are needed: Minor Reinforcements needed

Primary Tower

Back to Top

Tower Rigging Costs

Section Question Response
Tower Rigging Costs Complex Tower N/A
Helicopter Services Required Are helicopter services required? No

Primary Tower

Back to Top

Other Tower Expenses Not Listed

Information not provided.

Outside Professional Services Costs

Back to Top
Section Question Response
Outside Project Management Services Do you require outside project management services? Yes
Number of Hours 595
Explanation Please see attached quote from Widelity.
Outside RF consulting Engineering Services Perform engineering study for new channel assignment and antenna development Yes
Prepare engineering section of Form FCC Construction Permit Application Yes
For Auxiliary Facility No
For Main Facility Yes
Prepare engineering section of Form FCC License to Cover Application Yes
For Auxiliary Facility No
For Main Facility Yes
Prepare request for Special Temporary Authority Yes
Quantity 1
Do you have Distributed Transmission System engineering services? N/A
Critical Facility N/A
Terrain-Shielded Facility N/A
Attorney and Other Outside Consulting Services Prepare and file Form FCC Construction Permit Application Yes
For Auxiliary Facility No
For Main Facility Yes
Prepare and file Form FCC License to Cover Application Yes
For Auxiliary Facility No
For Main Facility Yes
Prepare request for Special Temporary Authority Yes
Quantity 1
NEPA Section 106 environmental review No
Environmental Assessment No
ASR Modification No
FAA Consultation (including preparation of FAA Form 7460) No
Negotiation of Lease and other Matter for Shared Locations No
Prepare or Review FCC Form 399 for Reimbursement Yes
Address transition timing and coordination issues w/ other stations and wireless providers Yes
RF Field Engineering Services Comprehensive coverage verification via field study No
RF exposure measurements Yes
Additional Field Engineering Service No
Number of Days N/A
Justification N/A

Outside Professional Services Costs

Back to Top

Other Professional Services Expenses Not Listed

Name Description

Additional Repack Legal Services Not Otherwise Specified in Form 399

Non-Catalog Legal Services such as review of quarterly transition status reports and other miscellaneous non-catalog legal fees.

Other Expenses

Back to Top
Section Question Response
AM Pattern Disturbance Is an Impact Study needed? No
Is Remediation needed? No
Facility Expenses Name N/A
Other Distributed Transmission System Expenses Not listed N/A
Name N/A
Is Notification of a Medical Facility required as a result of DTV broadcasting? Yes
Permit and Filing Costs Local Zoning Yes
Non-zoning permits No
BLM or NFS Coordination No
FCC Construction Permit Minor Change No
FCC License to Cover Application Yes
FCC Special Temporary Authority Application Yes
Other Miscellaneous Expenses Does this relocation require paying Disposal Costs (for equipment and other waste, net of any salvage value)? Yes
Does this relocation require Equipment Delivery or Handling Charges not otherwise included in individual item costs? Yes
Does this relocation require Equipment Storage? Yes
Does this relocation require the Development and Airing of an Announcement regarding an upcoming channel change? Yes
Does this relocation require MVPD Notification of a Channel Change? Yes

Other Expenses

Back to Top

Other Expenses Not Listed

Information not provided.

Cost Information

Back to Top

Transmitters

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate
Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $495,550.00 $234,498.02 N/A $136,205.46 N/A
Total for all systems $1,179,396.64 $782,962.60 N/A $306,024.90 N/A
Primary Transmitter ULXTE-16 $495,550.00 $234,498.02 $136,205.46
UHF - Liquid Cooled Solid State Transmitter 8.2 - 13 kW $481,500.00 $221,498.02 GatesAir invoice US0319019 and Quotes # Q-76811 and Q-80385 $129,705.46 N/A
Service entrance 3 phase/800 amp/208 volt $14,050.00 $13,000.00 N/A $6,500.00 N/A

Components

Actual Information Description File Name
UHF - Liquid Cooled Solid State Transmitter 8.2 - 13 kW

Component Description:
ULXTE-16 Transmitter
Amount:
$64,719.55

Component Description:
ULXTE-16
Amount:
$64,719.55

Component Description:
ULXTE-16 Transmitter
Amount:
$266.36
Service entrance 3 phase/800 amp/208 volt

Component Description:
Electrical service entrance
Amount:
$6,500.00

Cost Information

Back to Top

Antennas

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate
Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $232,438.64 $113,911.30 N/A $9,241.38 N/A
Total for all systems $1,179,396.64 $782,962.60 N/A $306,024.90 N/A
Interim Antenna 750 10402 $96,390.00 $26,420.28 $6,241.38
New combiner, cost per channel (without antenna) $80,000.00 $13,628.90 Please see the Kathrein quote 20180490-2 and attached narrative for details. N/A N/A
Sweep test of existing antenna $6,550.00 $6,550.00 N/A $0.00 N/A
UHF – Broadband Panel, Side Mount Auxiliary/Interim, 21 horizontally polarized $0.00 $0.00 PHANTOM ANTENNA N/A N/A
UHF - Lower Power Side Mount, Class A broadband panel (cost per panel) $9,840.00 $6,241.38 Please see the Kathrein quote 20180490-2 and attached narrative for details. $6,241.38 N/A
Primary Antenna SBB-E-8C170 $136,048.64 $87,491.02 $3,000.00
New combiner, cost per channel (without antenna) $80,000.00 $31,992.38 KESQ 50% portion cost of the combiner. Please see quote from RFS antennas 20067492 and attached narrative for details. N/A N/A
UHF - High Power, Side Mount, basic slot antenna, 8 bay,, 42 kW input, directional,, elliptically or circularly polarized $49,498.64 $49,498.64 Please see attached quote # 20067492 from RFS and attached narrative for details. $0.00 N/A
Sweep test of existing antenna $6,550.00 $6,000.00 Please see quote from RFS antennas 20067492 / 05/08/2018 / QT-EN and attached narrative for details. $3,000.00 N/A

Components

Actual Information Description File Name
New combiner, cost per channel (without antenna) Information not provided.
Sweep test of existing antenna Information not provided.
UHF – Broadband Panel, Side Mount Auxiliary/Interim, 21 horizontally polarized Information not provided.
UHF - Lower Power Side Mount, Class A broadband panel (cost per panel)

Component Description:
UHF TV Combiner System tuned for Narrowband inputs
Amount:
$6,241.38
New combiner, cost per channel (without antenna) Information not provided.
UHF - High Power, Side Mount, basic slot antenna, 8 bay,, 42 kW input, directional,, elliptically or circularly polarized Information not provided.
Sweep test of existing antenna

Component Description:
Sweep transmission line and antenna
Amount:
$3,000.00

Cost Information

Back to Top

Transmission Line

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate
Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $13,810.00 $10,975.78 N/A $0.00 N/A
Total for all systems $1,179,396.64 $782,962.60 N/A $306,024.90 N/A
Interim Transmission Line $6,400.00 $6,200.00 $0.00
Flexible Air Transmission Line - dielectric, 1 5/8" $6,400.00 $6,200.00 N/A N/A N/A
Primary Transmission Line $7,410.00 $4,775.78 $0.00
Flexible Air Transmission Line - dielectric, 3" $7,410.00 $4,775.78 Please see quote from RFS antennas 20067492 / 05/08/2018 / QT-EN and attached narrative for details. N/A N/A

Components

Information not provided.

Cost Information

Back to Top

Tower Equipment and Rigging Costs

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate
Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $261,000.00 $255,000.00 N/A $127,500.00 N/A
Total for all systems $1,179,396.64 $782,962.60 N/A $306,024.90 N/A
Primary Tower TOWER $261,000.00 $255,000.00 $127,500.00
Minor tower reinforcement/modifications $153,500.00 $150,000.00 N/A $75,000.00 N/A
Tower mapping for an undocumented/poorly documented tower and preparation of documentation necessary for tower load study $25,600.00 $25,000.00 N/A $12,500.00 N/A
Short Tower (less than 500') $81,900.00 $80,000.00 Antenna system installation (short tower) $40,000.00 N/A

Components

Actual Information Description File Name
Minor tower reinforcement/modifications

Component Description:
Minor tower reinforcements
Amount:
$75,000.00
Tower mapping for an undocumented/poorly documented tower and preparation of documentation necessary for tower load study

Component Description:
Tower mapping for undocumented tower
Amount:
$12,500.00
Short Tower (less than 500')

Component Description:
Antenna system installation (short tower)
Amount:
$40,000.00

Cost Information

Back to Top

Outside Professional Services

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate
Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $146,570.00 $146,862.50 N/A $33,078.06 N/A
Total for all systems $1,179,396.64 $782,962.60 N/A $306,024.90 N/A
Outside Professional Services $146,570.00 $146,862.50 $33,078.06
Additional Repack Legal Services Not Otherwise Specified in Form 399 $5,000.00 $5,000.00 N/A $2,651.00 N/A
RF Exposure Measurements $20,500.00 $20,500.00 All costs for RF exposure measurements on shared equipment will be apportioned to KESQ-TV. See cover letter. N/A N/A
Project management of the transition $91,630.00 $99,675.00 Please see attached quote from Widelity. $22,073.20 N/A
Attorney Fees - Prepare and File request for Special Temporary Authorization $3,585.00 $3,500.00 N/A N/A N/A
Attorney Fees -Prepare and File FCC Form 2100 (main), License to Cover Application $2,305.00 $2,250.00 N/A N/A N/A
Attorney Fees - Prepare and File FCC Form 2100 (main), Construction Permit Application $5,120.00 $5,000.00 N/A $3,666.36 N/A
Prepare request for Special Temporary Authorization $1,535.00 $1,500.00 N/A N/A N/A
Prepare engineering section of FCC Form 2100 (main), License to Cover Application $1,535.00 $500.00 N/A N/A N/A
Prepare engineering section of FCC Form 2100 (main), Construction Permit Application $3,070.00 $1,500.00 N/A $1,500.00 N/A
Perform engineering study for new channel assignment and antenna development $7,170.00 $2,687.50 du Treil invoice 242314 $2,687.50 N/A
Address transition timing and coordination issues w/ other stations and wireless $2,560.00 $2,250.00 N/A N/A N/A
Prepare and or review reimbursement form $2,560.00 $2,500.00 N/A $500.00 N/A

Components

Actual Information Description File Name
Additional Repack Legal Services Not Otherwise Specified in Form 399

Component Description:
Repack legal services
Amount:
$46.40

Component Description:
Repack Legal Services
Amount:
$27.84

Component Description:
Repack Legal Services
Amount:
$27.84

Component Description:
Non-Catalog Legal Services such as review of quarterly transition status reports and other miscellaneous non-catalog legal fees.
Amount:
$37.12

Component Description:
Repack legal services
Amount:
$105.50

Component Description:
Repack legal services
Amount:
$371.20

Component Description:
Repack legal services
Amount:
$1,187.20

Component Description:
Repack legal services
Amount:
$244.70

Component Description:
Repack legal services
Amount:
$603.20
RF Exposure Measurements Information not provided.
Project management of the transition

Component Description:
Cost Reconciliation
Amount:
$5,071.20

Component Description:
Project Management
Amount:
$7,223.65

Component Description:
Project Management
Amount:
$3,038.00

Component Description:
Project Managment
Amount:
$1,579.80

Component Description:
Project Management
Amount:
$1,037.80

Component Description:
Project Management
Amount:
$4,122.75
Attorney Fees - Prepare and File request for Special Temporary Authorization Information not provided.
Attorney Fees -Prepare and File FCC Form 2100 (main), License to Cover Application Information not provided.
Attorney Fees - Prepare and File FCC Form 2100 (main), Construction Permit Application

Component Description:
General repack services 2017. See "Repack Invoices Cover Memo"
Amount:
$2,291.36

Component Description:
Repack filing and services 2017
Amount:
$1,375.00
Prepare request for Special Temporary Authorization Information not provided.
Prepare engineering section of FCC Form 2100 (main), License to Cover Application Information not provided.
Prepare engineering section of FCC Form 2100 (main), Construction Permit Application

Component Description:
Engineering study work for new channel assignment and antenna development.
Amount:
$1,500.00
Perform engineering study for new channel assignment and antenna development

Component Description:
Professional Services
Amount:
$500.00

Component Description:
Professional Services
Amount:
$1,250.00

Component Description:
Engineering study work for new channel assignment and antenna development.
Amount:
$62.50

Component Description:
Engineering study work for new channel assignment an antenna development.
Amount:
$875.00
Address transition timing and coordination issues w/ other stations and wireless Information not provided.
Prepare and or review reimbursement form

Component Description:
CA Palm Springs-Professional Services
Amount:
$500.00

Cost Information

Back to Top

Other Expenses

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate
Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $30,028.00 $21,715.00 N/A $0.00 N/A
Total for all systems $1,179,396.64 $782,962.60 N/A $306,024.90 N/A
Other Expenses $30,028.00 $21,715.00 $0.00
MVPD Notification of Channel Change $2,500.00 $2,500.00 N/A N/A N/A
Develop and air announcement of upcoming channel change $750.00 $750.00 N/A N/A N/A
Equipment Storage $3,500.00 $3,500.00 N/A N/A N/A
Equipment Delivery and Handling Charges $2,500.00 $2,500.00 N/A N/A N/A
Disposal Costs (for equipment and other waste, net of any salvage value) $3,500.00 $3,500.00 N/A N/A N/A
Local Zoning $5,500.00 $5,500.00 COST FOR DRAFTING,SUBMISSION AND FILING FEES FOR NECESSARY BUILDING PERMITS ASSOCIATED WITH TOWER MODIFICATIONS. N/A N/A
FCC Filing Fees - Special Temporary Authorization request $195.00 $190.00 N/A N/A N/A
FCC Filing Fees - Form 2100 license to cover application $333.00 $325.00 N/A N/A N/A
DTV Medical Facility Notification $11,250.00 $2,950.00 N/A N/A N/A

Components

Information not provided.

Cost Information

Back to Top

Grand Total

Predetermined
Cost Estimate
Estimated Cost Actual Cost
Total for all systems $1,179,396.64 $782,962.60 $306,024.90

Construction Status

Back to Top
Question Response
Is construction complete? No

Certification

Back to Top
Section Question Response
Submission of Estimated Expenses Statements

WILLFUL FALSE STATEMENTS ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503), AND ANY FALSE STATEMENTS COULD SUBJECT THIS ENTITY TO LIABILITY UNDER THE FALSE CLAIMS ACT.

  1. The Authorized Person signing below certifies that he/she is authorized to submit this TV Broadcaster Relocation Fund Reimbursement Form on behalf of the above-named entity.

  2. The above-named entity acknowledges that all certifications and attached documentation are considered material representations.

  3. The above-named entity acknowledges the submission of the information herein creates no obligation on the part of the government to pay any amount.

  4. The above-named entity certifies that the equipment and services paid for with money from the TV Broadcaster Relocation Fund are necessary to change channels (broadcasters) or to continue to carry the signal of a broadcaster that changes channels (MVPD).

  5. The above-named entity certifies that all payments from the TV Broadcaster Relocation Fund (Fund) received by the entity listed on this form will be used only for expenses that are eligible for reimbursement from the Fund.

  6. The above-named entity certifies that it will maintain and provide to the Commission detailed records, including receipts, of all costs eligible for reimbursement actually incurred.

  7. The above-named entity acknowledges that overpayments or payments in error must be promptly refunded to the Commission.

  8. The above-named entity certifies that it is in full compliance with all statutes, rules, regulations and governmental requirements for which compliance is a pre-requisite for obtaining the payments herein requested.

I declare, under penalty of perjury, that I am an authorized representative of the above-named applicant for the Authorization(s) specified above.

James W DeChant

VP of Technology


02/08/2019

Certification

Back to Top
Section Question Response
Submission of Actual Cost Documentation Statements

WILLFUL FALSE STATEMENTS ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503), AND ANY FALSE STATEMENTS COULD SUBJECT THIS ENTITY TO LIABILITY UNDER THE FALSE CLAIMS ACT.

  1. The Authorized Person signing below certifies and represents that he/she is authorized to submit this TV Broadcaster Relocation Fund Reimbursement Form on behalf of the above-named entity. The above-named entity acknowledges that all certifications and attached documentation are considered material.

  2. The above-named entity acknowledges the submission of the information herein creates no obligation on the part of the government to pay any amount.

  3. The above-named entity certifies that the equipment and services paid for with money from the TV Broadcaster Relocation Fund are necessary to change channels (broadcasters) or to continue to carry the signal of a broadcaster that changes channels (MVPD).

  4. The above-named entity certifies that all payments from the TV Broadcaster Relocation Fund (Fund) received by the entity listed on this form will be used only for expenses that are eligible for reimbursement from the Fund.

  5. The above-named entity certifies that the cost information/documents submitted reflect costs actually incurred.

  6. The above-named entity acknowledges that overpayments or payments in error must be promptly refunded to the Commission.

  7. The above-named entity certifies that it is in full compliance with all statutes, rules, regulations and governmental requirements for which compliance is a pre-requisite for obtaining the payments herein requested.

I declare, under penalty of perjury, that I am an authorized representative of the above-named applicant for the Authorization(s) specified above.

James W DeChant

VP of Technology


02/08/2019

Attachments

Back to Top