Skip to main content Skip to footer and contact information
Go to the Federal Communications Commission homepage at www.fcc.gov

FCC Form 399: Reimbursement Request

Approved by OMB 3060-1178
Go to the Federal Communications Commission homepage at www.fcc.gov

(REFERENCE COPY - Not for submission) FCC Form 399: Reimbursement Request

Facility ID:
29719
Service:
DTV
Call Sign:
WJEB-TV
Channel:
21 (UHF)
File Number:
0000028174
FRN:
0005020243
Date Submitted:
09/14/2021

Applicant Information

Back to Top ↑

Applicant Name, Type, and Contact Information

Applicant Address Phone Email Applicant Type

JACKSONVILLE EDUCATORS BROADCASTING, INC.

PO Box 721800

HOUSTON, TX 77272

United States

 +1 (281) 983-7109 cmmay@maylawoffices.com Not-for-Profit

Reimbursement Contact Information

Reimbursement Contact Name and Information

Applicant Address Phone Email

[Confidential]

 

 

 

Preparer Contact Information

Back to Top ↑

Preparer Contact Name and Information

Applicant Address Phone Email

The Preparer is same as the reimbursement contact.

 

 

 

Broadcaster Information and Transition Plan

Back to Top ↑
Question Response
Will the station be sharing equipment with another broadcast television station or stations (e.g., a shared antenna, co-location on a tower, use of the same transmitter room, multiple transmitters feeding a combiner, etc.)? If yes, enter the facility ID's of the other stations and click 'prefill' to download those stations' licensing information. Yes
Briefly describe transition plan Reduce TPO to 50% and remove 1/2 of the xmitter system. Install new SS xmitter system. Add AUX antenna & line to the tower & feed it with a reduced signal from the current xmitter. Remove & replace antenna. Test.

Transmitters

Back to Top ↑
Section Question Response
Transmitter Related Expenses Do you have transmitter related expenses? Yes

Primary Transmitter

Back to Top ↑

Existing Transmitter Information

Section Question Response
Existing Transmitter Description Type of change Purchase New
Use Primary (Main)
Description of Use N/A
Ownership Owned
Owner N/A
Site N/A
Is this transmitter currently shared with another station? No
Is this transmitter currently in operating condition? Yes
Existing Transmitter Manufacturer and Type Manufacturer
Model DCX 2
Year 2005
Type Inductive Output Tube
IOT Power Type Two
Power Capacity 50 kW

Primary Transmitter

Back to Top ↑

New Transmitter Costs

Section Question Response
New Transmitter Use Primary (Main)
Change Type Purchase New
Is this a request for upgraded equipment? No
Manufacturer
Model HPTV-PRLX-U15
Transmitter Type Solid State
Solid State Cooling Liquid Cooled
Solid State Power capacity 24 kW
Justification for New Transmitter See attachment

Primary Transmitter

Back to Top ↑

Other Transmitter Costs

Section Question Response
Electrical Service Service Entrance (3 phases 800A 208V) No
Switchgear (industrial 800 amp) No
Transformer (480V) No
Power N/A
Rigid Conduit and Wiring No
Size N/A
Length N/A
Other Electrical Service Yes
Description labor, disconnects, breakers
HVAC Service Does the replacement transmitter require HVAC Service? No
Type N/A
Size N/A
Other Size N/A
Transmitter Building Addition/Modification or Leasehold Improvement Does the Transmitter Building require an addition, modification, other leashold improvement? No
Size N/A
Channel 14 Costs Is an RF Consulting Engineer needed? N/A
Is a channel 14 Mask Filer needed? N/A
Is additional field engineering time needed? N/A
Number of Days N/A

Primary Transmitter

Back to Top ↑

Other Transmitter Cost Not Listed

Name Description

install

xmitter installation

Antennas

Back to Top ↑
Section Question Response
Antenna Related Expenses Do you have antenna related expenses? Yes

Primary Antenna

Back to Top ↑

Existing Antenna Information

Section Question Response
Existing Antenna Description Type of change Purchase New
Antenna Use Primary (Main)
Description of Use N/A
Ownership Owned
Owner N/A
Site N/A
Is the existing antenna shared with another station or stations? No
Is the existing antenna directional? Yes
Is antenna in operating condition? Yes
Is antenna located on or in close proximity to an antenna farm? No
Existing Antenna Manufacturer and Type Class Full Power
Mounting Side Mount
Antenna position in stack Not in Stack
Polarization Horizontal
Type Slotted Coaxial
Number of Stations Supported N/A
Number of Panels N/A
Design power capacity in use N/A
Lower Limit N/A
Upper Limit N/A
Other Antenna Type N/A
ERP: 1000.0 kW
Manufacturer
Model ATW25H3-HSC1-44H
Year 2005

Primary Antenna

Back to Top ↑

New Antenna Costs

Section Question Response
New Antenna Description Use Primary (Main)
Description of Use N/A
Change Type Purchase New
Is this a request for upgraded equipment? No
Ownership Owned
Owner N/A
Is antenna shared? No
Is antenna directional? Yes
Will antenna be located on or in close proximity to an antenna farm? No
New Antenna Manufacturer and Types Class Full Power
Mounting Side Mount
Antenna position in stack Not in Stack
Polarization Horizontal
Type Slotted Coaxial
Number of Stations Supported N/A
Number of Panels/Bays N/A
Lower Limit N/A
Upper Limit N/A
Design power capacity in use N/A
Other Antenna Type N/A
ERP: 622.0 kW
Manufacturer
Model SWCDS24WCS/21
Year 2017
Justification for New Antenna THE PRESENT ANTENNA CAN NOT BE RE-TUNED.

Primary Antenna

Back to Top ↑

Other Antenna Costs

Section Question Response
Combiner for Shared Antenna Do you need a Combiner for a Shared Antenna?
Type
Number of channels supported N/A
Frequencies of channels supported N/A
Frequency N/A
Do you need a combiner output splitter/switcher for dual feed lines? N/A
Elbow Complex Do you require the separate purchase of the Elbow Complex? Yes
Broadband or Single Channel? Single Channel
Feed Line Size 6 1/8 inches inches
Side Mount Brackets Do you require the separate purchase of side mount brackets for a high power antenna? Yes
Pattern Scatter Analysis Do you require separate purchase of pattern scatter analysis for a side mount high or medium power antenna? Yes
Sweep Test Do you require the sweep testing of transmission line and antenna? Yes

Primary Antenna

Back to Top ↑

Other Antenna Cost Not Listed

Information not provided.

Interim Antenna

Back to Top ↑

New Antenna Costs

Section Question Response
New Antenna Description Use Interim
Description of Use N/A
Change Type Purchase New
Ownership Owned
Owner N/A
Is antenna shared? No
Is antenna directional? Yes
Will antenna be located on or in close proximity to an antenna farm? No
New Antenna Manufacturer and Type Class Full Power
Mounting Side Mount
Antenna position in stack Not in Stack
Polarization Horizontal
Type Slotted Coaxial
Number of Stations Supported N/A
Number of Panels/Bays N/A
Lower Limit N/A
Upper Limit N/A
Design power capacity in use N/A
Other Antenna Type N/A
ERP: 240.0 kW
Manufacturer
Model SWEDM12WC/44
Year 2017
Justification for New Antenna Remain on the air while antenna is replaced.

Interim Antenna

Back to Top ↑

Other Antenna Costs

Section Question Response
Elbow Complex Do you require the separate purchase of the Elbow Complex? No
Broadband or Single Channel? N/A
Feed Line Size N/A
Side Mount Brackets Do you require the separate purchase of side mount brackets for an antenna? Yes
Pattern Scatter Analysis Do you require separate purchase of pattern scatter analysis for a side mount high or medium power antenna? No
Sweep Test Do you require the sweep testing of transmission line and antenna? No

Interim Antenna

Back to Top ↑

Other Antenna Cost Not Listed

Information not provided.

Transmission Line

Back to Top ↑
Section Question Response
Transmission Line Related Expenses Do you have transmission line related expenses? Yes

Primary Transmission Line

Back to Top ↑

Existing Transmission Line

Section Question Response
Existing Transmission Line Description Type of change Purchase New
Use Primary (Main)
Description of Use N/A
Ownership Owned
Owner N/A
Site N/A
Is the existing transmission line shared with another station or stations? No
Is Transmission Line in operating condition? Yes
Existing Transmission Line Manufacturer and Type Manufacturer
Type Rigid
Diameter 6 1/8 inches
Other Diameter N/A
Segment Length 20 inches
Other Segment Length N/A
Number of parallel runs 1
Length 1000 feet per run

Primary Transmission Line

Back to Top ↑

New Transmission Line

Section Question Response
New Transmission Line Costs Use Primary (Main)
Description of Use N/A
Change Type Purchase New
Is this a request for upgraded equipment? No
Type Rigid
Diameter 6 1/8 inches
Other Diameter N/A
Segment Length 19 1/2 inches
Other Segment Length N/A
Number of parallel runs 1
Length 1000 feet per run
Justification for New Transmission Line Flange reflection

Primary Transmission Line

Back to Top ↑

Other Transmission Line Expenses Not Listed

Information not provided.

Interim Transmission Line

Back to Top ↑

New Transmission Line

Section Question Response
New Transmission Line Costs Use Interim
Description of Use N/A
Change Type Purchase New
Type Flexible Air
Diameter 3 inches
Segment Length N/A
Other Segment Length
Number of parallel runs 1
Length 500 feet per run
Justification for New Transmission Line to remain on the air while line is replaced.

Interim Transmission Line

Back to Top ↑

Other Transmission Line Expenses Not Listed

Name Description

sweep

fine matchers, misc

Tower Equipment And Rigging Costs

Back to Top ↑
Section Question Response
Tower Equipment or Rigging Costs Changes Do you have tower equipment or rigging costs changes? Yes

Primary Tower

Back to Top ↑

Existing Tower

Section Question Response
Existing Tower Description Type of change Modify Existing
Tower Use Primary (Main)
Description of Use N/A
Ownership Leased
Is this tower consider Complex? Terrain Constrained
Is this tower currently shared with any other stations? Yes
One or more FM, AM or TV radio broadcaster(s) Yes
Others Types of Users No
Is tower documented for structural analysis? Yes
Is tower compliant with Rev G? Unknown
Existing Tower Structure Registration Do you have a tower registration number? Yes
ASR Number 1020783
Coordinates (NAD83) Latitude (NAD83) 30° 16' 35.0" N-
Longitude (NAD83) 081° 33' 50.7" W-
Overall Structure Height 1061.01 feet
Support Structure Height 1042.97 feet
Ground Elevation Above Mean Sea Level (AMSL) 29.86 feet
Structure Type GTOWER - Guyed Structure Used for Communication Purposes
Tower Owner SpectraSite Communications, LLC. through American Towers, LLC.
Date Constructed 11/05/2008

FM, AM or TV radio broadcasters. Facility ID's, Call Signs and Services of other broadcast stations with whom the tower is shared

Facility ID Call Sign Service
70414 WBXJ-CD DTV

Primary Tower

Back to Top ↑

Tower Modification Costs

Section Question Response
Engineering Study Please what type of engineering study is required, if any: Study needed for undocumented/poorly documented tower
Tower Reinforcements Please select whether tower reinforcements are needed: Minor Reinforcements needed

Primary Tower

Back to Top ↑

Tower Rigging Costs

Section Question Response
Tower Rigging Costs Complex Tower Terrain constrained
Helicopter Services Required Are helicopter services required? No

Primary Tower

Back to Top ↑

Other Tower Expenses Not Listed

Name Description

structural

Load study candelabra

permit

Drawings

Structural

Load study

ground

permit package

construction

mods management

Outside Professional Services Costs

Back to Top ↑
Section Question Response
Outside Project Management Services Do you require outside project management services? Yes
Number of Hours 95
Explanation American Tower
Outside RF consulting Engineering Services Perform engineering study for new channel assignment and antenna development Yes
Prepare engineering section of Form FCC Construction Permit Application Yes
For Auxiliary Facility No
For Main Facility Yes
Prepare engineering section of Form FCC License to Cover Application Yes
For Auxiliary Facility No
For Main Facility Yes
Prepare request for Special Temporary Authority Yes
Quantity 2
Do you have Distributed Transmission System engineering services? N/A
Critical Facility N/A
Terrain-Shielded Facility N/A
Attorney and Other Outside Consulting Services Prepare and file Form FCC Construction Permit Application Yes
For Auxiliary Facility No
For Main Facility Yes
Prepare and file Form FCC License to Cover Application Yes
For Auxiliary Facility No
For Main Facility Yes
Prepare request for Special Temporary Authority Yes
Quantity 2
NEPA Section 106 environmental review No
Environmental Assessment No
ASR Modification No
FAA Consultation (including preparation of FAA Form 7460) No
Negotiation of Lease and other Matter for Shared Locations No
Prepare or Review FCC Form 399 for Reimbursement Yes
Address transition timing and coordination issues w/ other stations and wireless providers Yes
RF Field Engineering Services Comprehensive coverage verification via field study Yes
RF exposure measurements No
Additional Field Engineering Service No
Number of Days N/A
Justification N/A

Outside Professional Services Costs

Back to Top ↑

Other Professional Services Expenses Not Listed

Name Description

site

Meeting

Other Expenses

Back to Top ↑
Section Question Response
AM Pattern Disturbance Is an Impact Study needed? No
Is Remediation needed? No
Facility Expenses Name N/A
Other Distributed Transmission System Expenses Not listed N/A
Name N/A
Is Notification of a Medical Facility required as a result of DTV broadcasting? Yes
Permit and Filing Costs Local Zoning No
Non-zoning permits Yes
BLM or NFS Coordination No
FCC Construction Permit Minor Change No
FCC License to Cover Application Yes
FCC Special Temporary Authority Application No
Other Miscellaneous Expenses Does this relocation require paying Disposal Costs (for equipment and other waste, net of any salvage value)? No
Does this relocation require Equipment Delivery or Handling Charges not otherwise included in individual item costs? Yes
Does this relocation require Equipment Storage? No
Does this relocation require the Development and Airing of an Announcement regarding an upcoming channel change? No
Does this relocation require MVPD Notification of a Channel Change? No

Other Expenses

Back to Top ↑

Other Expenses Not Listed

Information not provided.

Cost Information

Back to Top ↑

Transmitters

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate 		Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $1,026,130.00 $836,930.00 N/A $721,770.00 N/A
Total for all systems $2,508,993.00 $2,083,253.00 N/A $1,772,903.74 N/A
Primary Transmitter HPTV-PRLX-U15 $1,026,130.00 $836,930.00 $721,770.00
install $30,000.00 $30,000.00 quoted xmitter install $30,000.00 N/A
Other Electrical Service: labor, disconnects, breakers $49,130.00 $49,130.00 quoted $0.00 N/A
UHF - Liquid Cooled Solid State Transmitter 21 - 31 kW $947,000.00 $757,800.00 N/A $691,770.00 N/A

Components

Actual Information Description File Name
install

Component Description:
xmitter install
Amount:
$30,000.00
Other Electrical Service: labor, disconnects, breakers Information not provided.
UHF - Liquid Cooled Solid State Transmitter 21 - 31 kW

Component Description:
proof
Amount:
$34,588.50

Component Description:
35% deposit, 30% 60 days, 30% prior to shipping
Amount:
$657,181.50

Cost Information

Back to Top ↑

Antennas

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate 		Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $453,840.00 $297,250.00 N/A $263,892.02 N/A
Total for all systems $2,508,993.00 $2,083,253.00 N/A $1,772,903.74 N/A
Interim Antenna SWEDM12WC/44 $212,650.00 $64,000.00 $51,642.02
Side mount brackets for high power antennas (if not included in antenna base cost) $23,150.00 $10,000.00 N/A $0.00 N/A
UHF - Lower Power Side Mount, One station - 200-500 kW, horizontally polarized $189,500.00 $54,000.00 N/A $51,642.02 N/A
Primary Antenna SWCDS24WCS/21 $241,190.00 $233,250.00 $212,250.00
Sweep test of existing antenna $6,730.00 $5,000.00 N/A $0.00 q
Pattern scatter analysis for side mount high/med power antennas (if not included in antenna base cost) $5,260.00 $5,000.00 N/A $0.00 N/A
Side mount brackets for high power antennas (if not included in antenna base cost) $23,150.00 $18,500.00 N/A $18,000.00 N/A
Elbow complex, single channel, at antenna input, per 6 1/8. feedline (if needed) $12,300.00 $11,000.00 N/A $10,250.00 N/A
UHF - High Power, Side Mount, basic slot antenna, 622 kW input, directional,, horizontally polarized $193,750.00 $193,750.00 N/A $184,000.00 N/A

Components

Actual Information Description File Name
Side mount brackets for high power antennas (if not included in antenna base cost) Information not provided.
UHF - Lower Power Side Mount, One station - 200-500 kW, horizontally polarized

Component Description:
interim antenna
Amount:
$47,490.00

Component Description:
reducers
Amount:
$4,152.02
Sweep test of existing antenna

Component Description:
sweep
Amount:
$8,500.00
Pattern scatter analysis for side mount high/med power antennas (if not included in antenna base cost) Information not provided.
Side mount brackets for high power antennas (if not included in antenna base cost)

Component Description:
Deposit bracket
Amount:
$9,000.00

Component Description:
50% balance
Amount:
$9,000.00
Elbow complex, single channel, at antenna input, per 6 1/8. feedline (if needed)

Component Description:
Deposit elbow
Amount:
$5,125.00

Component Description:
50% balance
Amount:
$5,125.00
UHF - High Power, Side Mount, basic slot antenna, 622 kW input, directional,, horizontally polarized

Component Description:
Deposit main antenna
Amount:
$92,000.00

Component Description:
50% balance
Amount:
$92,000.00

Cost Information

Back to Top ↑

Transmission Line

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate 		Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $241,500.00 $222,000.00 N/A $211,660.18 N/A
Total for all systems $2,508,993.00 $2,083,253.00 N/A $1,772,903.74 N/A
Interim Transmission Line $39,500.00 $42,000.00 $33,874.18
sweep $10,000.00 $10,000.00 set up interim antenna $2,670.26 N/A
Flexible Air Transmission Line - dielectric, 3" $29,500.00 $32,000.00 cut sections $31,203.92 N/A
Primary Transmission Line $202,000.00 $180,000.00 $177,786.00
Rigid Transmission Line - copper, 6 1/8" $202,000.00 $180,000.00 N/A $177,786.00 N/A

Components

Actual Information Description File Name
sweep

Component Description:
inner connector
Amount:
$570.26

Component Description:
sweep line.2a
Amount:
$2,100.00
Flexible Air Transmission Line - dielectric, 3"

Component Description:
line
Amount:
$29,003.92

Component Description:
tuner 2a
Amount:
$2,200.00
Rigid Transmission Line - copper, 6 1/8"

Component Description:
deposit line
Amount:
$85,293.00

Component Description:
balance plus shipping
Amount:
$92,493.00

Component Description:
anchor plus shipping
Amount:
$570.26

Cost Information

Back to Top ↑

Tower Equipment and Rigging Costs

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate 		Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $627,738.00 $614,611.00 N/A $496,652.94 N/A
Total for all systems $2,508,993.00 $2,083,253.00 N/A $1,772,903.74 N/A
Primary Tower GTOWER $627,738.00 $614,611.00 $496,652.94
Complex Tower (includes, for example, those with candelabras and/or stacked antennas) $421,000.00 $484,000.00 overage, see rate sheet. $483,242.94 N/A
structural $5,300.00 $5,300.00 ATC $5,237.50 N/A
Tower mapping for an undocumented/poorly documented tower and preparation of documentation necessary for tower load study $26,300.00 $8,173.00 N/A $8,172.50 N/A
Minor tower reinforcement/modifications $158,000.00 $100,000.00 N/A $0.00 N/A
ground $4,700.00 $4,700.00 American Tower $0.00 N/A
permit $5,238.00 $5,238.00 American Tower $0.00 N/A
Structural $4,700.00 $4,700.00 American Tower $0.00 N/A
construction $2,500.00 $2,500.00 American Tower $0.00 N/A

Components

Actual Information Description File Name
Complex Tower (includes, for example, those with candelabras and/or stacked antennas)

Component Description:
weather
Amount:
$2,400.00

Component Description:
deposite
Amount:
$156,612.00

Component Description:
inside work
Amount:
$27,476.33

Component Description:
clamps
Amount:
$890.72

Component Description:
final
Amount:
$103,636.00

Component Description:
completion of antenna
Amount:
$127,215.00

Component Description:
progress invoice
Amount:
$60,000.00

Component Description:
delay
Amount:
$5,012.89
structural

Component Description:
structural
Amount:
$5,237.50
Tower mapping for an undocumented/poorly documented tower and preparation of documentation necessary for tower load study

Component Description:
Tower Map
Amount:
$8,172.50
Minor tower reinforcement/modifications Information not provided.
ground Information not provided.
permit Information not provided.
Structural Information not provided.
construction Information not provided.

Cost Information

Back to Top ↑

Outside Professional Services

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate 		Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $137,150.00 $98,180.00 N/A $68,525.40 N/A
Total for all systems $2,508,993.00 $2,083,253.00 N/A $1,772,903.74 N/A
Outside Professional Services $137,150.00 $98,180.00 $68,525.40
Project management of the transition $15,010.00 $9,480.00 N/A $9,480.00 N/A
site $1,500.00 $1,500.00 American Tower $1,500.00 N/A
Comprehensive coverage verification via field study, if needed $84,200.00 $55,000.00 N/A $46,995.40 N/A
Attorney Fees - Prepare and File request for Special Temporary Authorization $7,360.00 $7,000.00 N/A $0.00 N/A
Attorney Fees -Prepare and File FCC Form 2100 (main), License to Cover Application $2,365.00 $2,200.00 N/A $0.00 N/A
Attorney Fees - Prepare and File FCC Form 2100 (main), Construction Permit Application $5,260.00 $5,000.00 N/A $0.00 N/A
Prepare request for Special Temporary Authorization $4,100.00 $4,000.00 N/A $3,500.00 N/A
Prepare engineering section of FCC Form 2100 (main), License to Cover Application $1,580.00 $1,500.00 N/A $750.00 N/A
Prepare engineering section of FCC Form 2100 (main), Construction Permit Application $3,155.00 $3,000.00 N/A $1,750.00 N/A
Perform engineering study for new channel assignment and antenna development $7,360.00 $5,000.00 N/A $2,050.00 N/A
Address transition timing and coordination issues w/ other stations and wireless $2,630.00 $2,500.00 N/A $2,500.00 N/A
Prepare and or review reimbursement form $2,630.00 $2,000.00 N/A $0.00 N/A

Components

Actual Information Description File Name
Project management of the transition

Component Description:
Management fee
Amount:
$9,480.00
site

Component Description:
meeting
Amount:
$1,500.00
Comprehensive coverage verification via field study, if needed

Component Description:
balance
Amount:
$14,971.32

Component Description:
RF Test 2
Amount:
$32,024.08
Attorney Fees - Prepare and File request for Special Temporary Authorization Information not provided.
Attorney Fees -Prepare and File FCC Form 2100 (main), License to Cover Application Information not provided.
Attorney Fees - Prepare and File FCC Form 2100 (main), Construction Permit Application Information not provided.
Prepare request for Special Temporary Authorization

Component Description:
sta
Amount:
$1,750.00

Component Description:
Sta 2
Amount:
$1,750.00
Prepare engineering section of FCC Form 2100 (main), License to Cover Application

Component Description:
license
Amount:
$750.00
Prepare engineering section of FCC Form 2100 (main), Construction Permit Application

Component Description:
Engineering for 2100 CP
Amount:
$1,750.00
Perform engineering study for new channel assignment and antenna development

Component Description:
Interference study for CP
Amount:
$650.00

Component Description:
antenna
Amount:
$750.00

Component Description:
Further interference study for CP
Amount:
$650.00
Address transition timing and coordination issues w/ other stations and wireless

Component Description:
timing
Amount:
$2,500.00
Prepare and or review reimbursement form Information not provided.

Cost Information

Back to Top ↑

Other Expenses

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate 		Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $22,635.00 $14,282.00 N/A $10,403.20 N/A
Total for all systems $2,508,993.00 $2,083,253.00 N/A $1,772,903.74 N/A
Other Expenses $22,635.00 $14,282.00 $10,403.20
Equipment Delivery and Handling Charges $10,000.00 $10,000.00 shipping $7,200.00 N/A
Non-zoning permits $750.00 $750.00 American Tower $0.00 N/A
FCC Filing Fees - Form 2100 license to cover application $335.00 $300.00 N/A $0.00 N/A
DTV Medical Facility Notification $11,550.00 $3,232.00 N/A $3,203.20 N/A

Components

Actual Information Description File Name
Equipment Delivery and Handling Charges

Component Description:
shipping 2a
Amount:
$4,200.00

Component Description:
STORAGE
Amount:
$3,000.00
Non-zoning permits Information not provided.
FCC Filing Fees - Form 2100 license to cover application Information not provided.
DTV Medical Facility Notification

Component Description:
Med
Amount:
$3,203.20

Cost Information

Back to Top ↑

Grand Total

Predetermined
Cost Estimate 		Estimated Cost Actual Cost
Total for all systems $2,508,993.00 $2,083,253.00 $1,772,903.74

Reimbursement Status

Back to Top ↑
Question Response
The facility has ceased operating on its pre-auction channel. Yes
Construction of final facilities or all necessary modifications are complete. Yes
All receipts for reimbursement have been submitted no further costs are expected to be incurred. Note this will lock the Form 399 from further editing and begin close-out procedures with the Fund Administrator. No

Certification

Back to Top ↑
Section Question Response
Submission of Estimated Expenses Statements

WILLFUL FALSE STATEMENTS ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503), AND ANY FALSE STATEMENTS COULD SUBJECT THIS ENTITY TO LIABILITY UNDER THE FALSE CLAIMS ACT.

  1. The Authorized Person signing below certifies that he/she is authorized to submit this TV Broadcaster Relocation Fund Reimbursement Form on behalf of the above-named entity.

  2. The above-named entity acknowledges that all certifications and attached documentation are considered material representations.

  3. The above-named entity acknowledges the submission of the information herein creates no obligation on the part of the government to pay any amount.

  4. The above-named entity certifies that the equipment and services paid for with money from the TV Broadcaster Relocation Fund are necessary to change channels (broadcasters) or to continue to carry the signal of a broadcaster that changes channels (MVPD).

  5. The above-named entity certifies that all payments from the TV Broadcaster Relocation Fund (Fund) received by the entity listed on this form will be used only for expenses that are eligible for reimbursement from the Fund.

  6. The above-named entity certifies that it will maintain and provide to the Commission detailed records, including receipts, of all costs eligible for reimbursement actually incurred.

  7. The above-named entity acknowledges that overpayments or payments in error must be promptly refunded to the Commission.

  8. The above-named entity certifies that it is in full compliance with all statutes, rules, regulations and governmental requirements for which compliance is a pre-requisite for obtaining the payments herein requested.
I declare, under penalty of perjury, that I am an authorized representative of the above-named applicant for the Authorization(s) specified above.

Steve Hastings

Network RF Manager


09/14/2021

Certification

Back to Top ↑
Section Question Response
Submission of Actual Cost Documentation Statements

WILLFUL FALSE, FRAUDULENT, OR FICTITIOUS STATEMENTS ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISIONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503), AND ANY FALSE AND/OR FRAUDULENT STATEMENTS COULD SUBJECT THIS ENTITY TO LIABILITY UNDER THE FALSE CLAIMS ACT (U.S. CODE, TITLE 31, SECTIONS 3729-3733).

  1. The Authorized Person signing below certifies and represents that he/she is authorized to submit this TV Broadcaster Relocation Fund Reimbursement Form on behalf of the above-named entity.

  2. The above-named entity certifies that the statements in this form and attached documentation are true, complete, and correct.

  3. The above-named entity acknowledges that all certifications and attached documentation are considered material representations.

  4. The above-named entity acknowledges the submission of the information herein creates no obligation on the part of the government to pay any amount.

  5. The above-named entity certifies that the equipment and services paid for with money from the TV Broadcaster Relocation Fund are necessary to change channels (full power and Class A stations) and/or otherwise modify a television station’s facility as a result of the spectrum repack (LPTV/TV Translator stations); or to minimize service disruption resulting from a repacked television station (FM stations); or to continue to carry the signal of a broadcaster that changes channels (MVPD) .

  6. The above-named entity certifies that all payments from the TV Broadcaster Relocation Fund (Fund) received by the entity listed on this form will be used only for expenses that are eligible for reimbursement from the Fund.

  7. The above-named entity certifies that the cost information/documents submitted reflect costs actually incurred.

  8. The above-named entity acknowledges that overpayments or payments in error must be promptly refunded to the Commission.

  9. The above-named entity certifies that it is in full compliance with all statutes, rules, regulations and governmental requirements for which compliance is a prerequisite for obtaining the payments herein requested.
I declare, under penalty of perjury, that I am an authorized representative of the above-named applicant for the Authorization(s) specified above.

Steve Hastings

Network RF Manager


09/14/2021

Certification

Back to Top ↑
Section Question Response
Submission of Final Allocation or Accounting Information Statements

WILLFUL FALSE STATEMENTS ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503), AND ANY FALSE STATEMENTS COULD SUBJECT THIS ENTITY TO LIABILITY UNDER THE FALSE CLAIMS ACT.

  1. The Authorized Person signing below certifies and represents that he/she is authorized to submit this TV Broadcaster Relocation Fund Reimbursement Form on behalf of the above-named entity. The above-named entity acknowledges that all certifications and attached documentation are considered material representations.

  2. The above-named entity acknowledges the submission of the information herein creates no obligation on the part of the government to pay any amount.

  3. The above-named entity certifies that all costs identified as "actual costs" herein accurately represent the costs actually paid by the above-named entity, including any discounts, refunds, or rebates.

  4. The above-named entity certifies that all payments from the TV Broadcaster Relocation Fund (Fund) received by the entity listed on this form will be used only for expenses that are eligible for reimbursement from the Fund.

  5. The above-named entity acknowledges that overpayments or payments in error must be promptly refunded to the Commission.

  6. The above-named entity certifies that it is in full compliance with all statutes, rules, regulations and governmental requirements for which compliance is a pre-requisite for obtaining the payments herein requested.
I declare, under penalty of perjury, that I am an authorized representative of the above-named applicant for the Authorization(s) specified above.

Steve Hastings

Network RF Manager


09/14/2021

Attachments

Back to Top ↑