| Applicant | Address | Phone | Applicant Type | |
|---|---|---|---|---|
|
GULF-CALIFORNIA BROADCAST COMPANY Doing Business As: News-Press & Gazette Company |
825 Edmond St. Saint Joseph, MO 64501 United States |
+1 (816) 271-8505 | tim.hannan@npgco.com | Corporation |
| Applicant | Address | Phone | |
|---|---|---|---|
|
[Confidential] |
|
|
|
| Applicant | Address | Phone | |
|---|---|---|---|
|
The Preparer is same as the reimbursement contact. |
|
|
|
| Question | Response |
|---|---|
| Will the station be sharing equipment with another broadcast television station or stations (e.g., a shared antenna, co-location on a tower, use of the same transmitter room, multiple transmitters feeding a combiner, etc.)? If yes, enter the facility ID's of the other stations and click 'prefill' to download those stations' licensing information. | Yes |
| Briefly describe transition plan | PERFORM STRUCTURAL ON TOWER AND REINFORCE TOWER AS NEEDED TO MEET REV-G. INSTALL TEMPORARY ANTENNA AND CONNECT EXISTING TRANSMITTER. REMOVE TRANSMISSION SYSTEM AND REPLACE WITH NEW ONE. SWEEP AND TEST SYSTEM. REMOVE OLD TRANSMITTER AFTER CUT OVER. |
| Section | Question | Response |
|---|---|---|
| Transmitter Related Expenses | Do you have transmitter related expenses? | Yes |
| Section | Question | Response |
|---|---|---|
| Existing Transmitter Description | Type of change | Purchase New |
| Use | Primary (Main) | |
| Description of Use | N/A | |
| Ownership | Owned | |
| Owner | N/A | |
| Site | N/A | |
| Is this transmitter currently shared with another station? | No | |
| Is this transmitter currently in operating condition? | Yes | |
| Existing Transmitter Manufacturer and Type | Manufacturer | |
| Model | LX2000 | |
| Year | 2005 | |
| Type | Solid State | |
| Solid State Cooling | Air Cooled | |
| Solid State Power Capacity | 2 kW |
| Section | Question | Response |
|---|---|---|
| New Transmitter | Use | Primary (Main) |
| Change Type | Purchase New | |
| Is this a request for upgraded equipment? | Yes | |
| Manufacturer | ||
| Model | ULXTE-16 | |
| Transmitter Type | Solid State | |
| Solid State Cooling | Liquid Cooled | |
| Solid State Power capacity | 10.8 kW | |
| Justification for New Transmitter | UBS, WHICH OWNS THE IP FORMERLY HELD BY THE MANUFACTURER (AXCERA, WHICH NO LONGER EXISTS), HAS INDICATED THAT THE EXISTING TRANSMITTER CANNOT PRODUCE THE NECESSARY POWER TO MEET THE NEW LICENSE, AND IT MUST BE REPLACED. |
| Section | Question | Response |
|---|---|---|
| Electrical Service | Service Entrance (3 phases 800A 208V) | Yes |
| Switchgear (industrial 800 amp) | No | |
| Transformer (480V) | No | |
| Power | N/A | |
| Rigid Conduit and Wiring | No | |
| Size | N/A | |
| Length | N/A | |
| Other Electrical Service | No | |
| Description | N/A | |
| HVAC Service | Does the replacement transmitter require HVAC Service? | No |
| Type | N/A | |
| Size | N/A | |
| Other Size | N/A | |
| Transmitter Building Addition/Modification or Leasehold Improvement | Does the Transmitter Building require an addition, modification, other leashold improvement? | No |
| Size | N/A | |
| Channel 14 Costs | Is an RF Consulting Engineer needed? | N/A |
| Is a channel 14 Mask Filer needed? | N/A | |
| Is additional field engineering time needed? | N/A | |
| Number of Days | N/A |
| Section | Question | Response |
|---|---|---|
| Antenna Related Expenses | Do you have antenna related expenses? | Yes |
| Section | Question | Response |
|---|---|---|
| Existing Antenna Description | Type of change | Purchase New |
| Antenna Use | Primary (Main) | |
| Description of Use | N/A | |
| Ownership | Owned | |
| Owner | N/A | |
| Site | N/A | |
| Is the existing antenna shared with another station or stations? | No | |
| Is the existing antenna directional? | Yes | |
| Is antenna in operating condition? | Yes | |
| Is antenna located on or in close proximity to an antenna farm? | Yes | |
| Existing Antenna Manufacturer and Type | Class | Full Power |
| Mounting | Top Mount | |
| Antenna position in stack | Top | |
| Polarization | Elliptical | |
| Type | Slotted Coaxial | |
| Number of Stations Supported | N/A | |
| Number of Panels | N/A | |
| Design power capacity in use | N/A | |
| Lower Limit | N/A | |
| Upper Limit | N/A | |
| Other Antenna Type | N/A | |
| ERP: | 42.0 kW | |
| Manufacturer | ||
| Model | SFN-2030-D-1 | |
| Year | 2005 |
| Section | Question | Response |
|---|---|---|
| New Antenna Description | Use | Primary (Main) |
| Description of Use | N/A | |
| Change Type | Purchase New | |
| Is this a request for upgraded equipment? | Yes | |
| Ownership | Owned | |
| Owner | N/A | |
| Is antenna shared? | Yes | |
| Is antenna directional? | Yes | |
| Will antenna be located on or in close proximity to an antenna farm? | Yes | |
| New Antenna Manufacturer and Types | Class | Full Power |
| Mounting | Side Mount | |
| Antenna position in stack | Not in Stack | |
| Polarization | Elliptical | |
| Type | Broadband Slot | |
| Number of Stations Supported | 4 | |
| Number of Panels/Bays | 8 | |
| Lower Limit | 470.00 MHz | |
| Upper Limit | 700.00 MHz | |
| Design power capacity in use | 50.0 % | |
| Other Antenna Type | N/A | |
| ERP: | 42.0 kW | |
| Manufacturer | ||
| Model | SBB-E-8C170 | |
| Year | 2018 | |
| Justification for New Antenna | EXISTING ANTENNA TUNED TO CHANNEL 42 AND CANNOT BE TUNED TO NEW FREQUENCY. MUST REPLACE WITH NEW ANTENNA ON ASSIGNED FREQUENCY. |
| Section | Question | Response |
|---|---|---|
| Combiner for Shared Antenna | Do you need a Combiner for a Shared Antenna? | Yes |
| Type | New | |
| Number of channels supported | 4 | |
| Frequencies of channels supported | RF channel | |
| Frequency | N/A | |
| Do you need a combiner output splitter/switcher for dual feed lines? | No | |
| Elbow Complex | Do you require the separate purchase of the Elbow Complex? | No |
| Broadband or Single Channel? | N/A | |
| Feed Line Size | N/A | |
| Side Mount Brackets | Do you require the separate purchase of side mount brackets for a high power antenna? | No |
| Pattern Scatter Analysis | Do you require separate purchase of pattern scatter analysis for a side mount high or medium power antenna? | No |
| Sweep Test | Do you require the sweep testing of transmission line and antenna? | Yes |
| RF Channel Number |
|---|
| 28 |
| 18 |
| 20 |
| 33 |
| Section | Question | Response |
|---|---|---|
| New Antenna Description | Use | Interim |
| Description of Use | N/A | |
| Change Type | Purchase New | |
| Ownership | Owned | |
| Owner | N/A | |
| Is antenna shared? | Yes | |
| Is antenna directional? | Yes | |
| Will antenna be located on or in close proximity to an antenna farm? | Yes | |
| New Antenna Manufacturer and Type | Class | Class A |
| Mounting | Side Mount | |
| Antenna position in stack | Not in Stack | |
| Polarization | Horizontal | |
| Type | Broadband Panel | |
| Number of Stations Supported | 2 | |
| Number of Panels/Bays | 8 | |
| Lower Limit | 470.00 MHz | |
| Upper Limit | 872.00 MHz | |
| Design power capacity in use | 50.0 % | |
| Other Antenna Type | N/A | |
| ERP: | 20.8 kW | |
| Manufacturer | ||
| Model | 750 10402 | |
| Year | 2018 | |
| Justification for New Antenna | INTERIM ANTENNA IS REQUIRED TO FACILITATE ONGOING OPERATIONS AS TOWER WORK, NEW FEED LINE AND NEW ANTENNA IS INSTALLED. |
| Section | Question | Response |
|---|---|---|
| Combiner for Shared Antenna | Do you need a Combiner for a Shared Antenna? | Yes |
| Type | New | |
| Number of channels supported | 2 | |
| Frequencies of channels supported | RF channel | |
| Frequency | N/A | |
| Do you need a combiner output splitter/switcher for dual feed lines? | No | |
| Elbow Complex | Do you require the separate purchase of the Elbow Complex? | No |
| Broadband or Single Channel? | N/A | |
| Feed Line Size | N/A | |
| Side Mount Brackets | Do you require the separate purchase of side mount brackets for an antenna? | No |
| Pattern Scatter Analysis | Do you require separate purchase of pattern scatter analysis for a side mount high or medium power antenna? | No |
| Sweep Test | Do you require the sweep testing of transmission line and antenna? | Yes |
| RF Channel Number |
|---|
| 42 |
| 39 |
| Section | Question | Response |
|---|---|---|
| Transmission Line Related Expenses | Do you have transmission line related expenses? | Yes |
| Section | Question | Response |
|---|---|---|
| Existing Transmission Line Description | Type of change | Purchase New |
| Use | Primary (Main) | |
| Description of Use | N/A | |
| Ownership | Owned | |
| Owner | N/A | |
| Site | N/A | |
| Is the existing transmission line shared with another station or stations? | No | |
| Is Transmission Line in operating condition? | Yes | |
| Existing Transmission Line Manufacturer and Type | Manufacturer | |
| Type | Rigid | |
| Diameter | 3 1/8 inches | |
| Other Diameter | N/A | |
| Segment Length | 19 1/2 inches | |
| Other Segment Length | N/A | |
| Number of parallel runs | 1 | |
| Length | 160 feet per run |
| Section | Question | Response |
|---|---|---|
| New Transmission Line Costs | Use | Primary (Main) |
| Description of Use | N/A | |
| Change Type | Purchase New | |
| Is this a request for upgraded equipment? | Yes | |
| Type | Flexible Air | |
| Diameter | 3 inches | |
| Other Diameter | N/A | |
| Segment Length | N/A | |
| Other Segment Length | N/A | |
| Number of parallel runs | 1 | |
| Length | 130 feet per run | |
| Justification for New Transmission Line | EXISTING RIGID LINE DOES NOT SUPPORT THE NEWLY ASSIGNED FREQUENCY. |
| Section | Question | Response |
|---|---|---|
| New Transmission Line Costs | Use | Interim |
| Description of Use | N/A | |
| Change Type | Purchase New | |
| Type | Flexible Air | |
| Diameter | 1 5/8 inches | |
| Segment Length | N/A | |
| Other Segment Length | ||
| Number of parallel runs | 1 | |
| Length | 200 feet per run | |
| Justification for New Transmission Line | NEED BACK UP LINE AS EXISTING LINES WILL BE REMOVED AND NEW RIGID LINE WILL BE INSTALLED. INTERIM ANTENNA NEEDS TO OPERATE WHILE NEW ANTENNA SYSTEM IS INSTALLED AND TESTED. |
| Section | Question | Response |
|---|---|---|
| Tower Equipment or Rigging Costs Changes | Do you have tower equipment or rigging costs changes? | Yes |
| Section | Question | Response |
|---|---|---|
| Existing Tower Description | Type of change | Modify Existing |
| Tower Use | Primary (Main) | |
| Description of Use | N/A | |
| Ownership | Owned | |
| Is this tower consider Complex? | No | |
| Is this tower currently shared with any other stations? | Yes | |
| One or more FM, AM or TV radio broadcaster(s) | Yes | |
| Others Types of Users | No | |
| Is tower documented for structural analysis? | Unknown | |
| Is tower compliant with Rev G? | No | |
| Existing Tower Structure Registration | Do you have a tower registration number? | Yes |
| ASR Number | 1220472 | |
| Coordinates (NAD83) | Latitude (NAD83) | 33° 51' 58.1" N- |
| Longitude (NAD83) | 116° 26' 05.0" W- | |
| Overall Structure Height | 88.91 feet | |
| Support Structure Height | 60.04 feet | |
| Ground Elevation Above Mean Sea Level (AMSL) | 1555.10 feet | |
| Structure Type | TOWER - Free Standing or Guyed Structure | |
| Tower Owner | Gulf-California Broadcast Co | |
| Date Constructed | 09/23/1968 |
| Facility ID | Call Sign | Service |
|---|---|---|
| 51207 | KDFX-CD | DTV |
| Section | Question | Response |
|---|---|---|
| Engineering Study | Please what type of engineering study is required, if any: | Study needed for undocumented/poorly documented tower |
| Tower Reinforcements | Please select whether tower reinforcements are needed: | Minor Reinforcements needed |
| Section | Question | Response |
|---|---|---|
| Tower Rigging Costs | Complex Tower | N/A |
| Helicopter Services Required | Are helicopter services required? | No |
| Section | Question | Response |
|---|---|---|
| Outside Project Management Services | Do you require outside project management services? | Yes |
| Number of Hours | 595 | |
| Explanation | Please see attached quote from Widelity. | |
| Outside RF consulting Engineering Services | Perform engineering study for new channel assignment and antenna development | Yes |
| Prepare engineering section of Form FCC Construction Permit Application | Yes | |
| For Auxiliary Facility | No | |
| For Main Facility | Yes | |
| Prepare engineering section of Form FCC License to Cover Application | Yes | |
| For Auxiliary Facility | No | |
| For Main Facility | Yes | |
| Prepare request for Special Temporary Authority | Yes | |
| Quantity | 1 | |
| Do you have Distributed Transmission System engineering services? | N/A | |
| Critical Facility | N/A | |
| Terrain-Shielded Facility | N/A | |
| Attorney and Other Outside Consulting Services | Prepare and file Form FCC Construction Permit Application | Yes |
| For Auxiliary Facility | No | |
| For Main Facility | Yes | |
| Prepare and file Form FCC License to Cover Application | Yes | |
| For Auxiliary Facility | No | |
| For Main Facility | Yes | |
| Prepare request for Special Temporary Authority | Yes | |
| Quantity | 1 | |
| NEPA Section 106 environmental review | No | |
| Environmental Assessment | No | |
| ASR Modification | No | |
| FAA Consultation (including preparation of FAA Form 7460) | No | |
| Negotiation of Lease and other Matter for Shared Locations | No | |
| Prepare or Review FCC Form 399 for Reimbursement | Yes | |
| Address transition timing and coordination issues w/ other stations and wireless providers | Yes | |
| RF Field Engineering Services | Comprehensive coverage verification via field study | No |
| RF exposure measurements | Yes | |
| Additional Field Engineering Service | No | |
| Number of Days | N/A | |
| Justification | N/A |
| Name | Description |
|---|---|
Additional Repack Legal Services Not Otherwise Specified in Form 399 |
Non-Catalog Legal Services such as review of quarterly transition status reports and other miscellaneous non-catalog legal fees. |
| Section | Question | Response |
|---|---|---|
| AM Pattern Disturbance | Is an Impact Study needed? | No |
| Is Remediation needed? | No | |
| Facility Expenses | Name | N/A |
| Other Distributed Transmission System Expenses Not listed | N/A | |
| Name | N/A | |
| Is Notification of a Medical Facility required as a result of DTV broadcasting? | Yes | |
| Permit and Filing Costs | Local Zoning | Yes |
| Non-zoning permits | No | |
| BLM or NFS Coordination | No | |
| FCC Construction Permit Minor Change | No | |
| FCC License to Cover Application | Yes | |
| FCC Special Temporary Authority Application | Yes | |
| Other Miscellaneous Expenses | Does this relocation require paying Disposal Costs (for equipment and other waste, net of any salvage value)? | Yes |
| Does this relocation require Equipment Delivery or Handling Charges not otherwise included in individual item costs? | Yes | |
| Does this relocation require Equipment Storage? | Yes | |
| Does this relocation require the Development and Airing of an Announcement regarding an upcoming channel change? | Yes | |
| Does this relocation require MVPD Notification of a Channel Change? | Yes |
| Name | Description |
|---|---|
Attorney Fees and Other Matters |
Legal Services |
| Description | Predetermined Cost Estimate |
Estimated Cost | Estimated Cost Justification | Actual Cost | Actual Cost Justification |
|---|---|---|---|---|---|
| Sub-total | $508,900.00 | $274,398.02 | N/A | $182,605.46 | N/A |
| Total for all systems | $1,257,668.62 | $929,653.08 | N/A | $752,833.55 | N/A |
| Primary Transmitter ULXTE-16 | $508,900.00 | $274,398.02 | $182,605.46 | ||
| Service entrance 3 phase/800 amp/208 volt | $14,400.00 | $23,040.00 | see Justifying Quote - KESQ Repack turnkey budgetary proposal Rev. 3 | $23,040.00 | N/A |
| UHF - Liquid Cooled Solid State Transmitter 8.2 - 13 kW | $494,500.00 | $251,358.02 | GatesAir invoice US0319019 and Quotes # Q-76811 and Q-80385; Justifying Quote - KESQ Repack turnkey budgetary proposal Rev. 3 | $159,565.46 | N/A |
| Actual Information Description | File Name |
|---|---|
| Service entrance 3 phase/800 amp/208 volt | |
| UHF - Liquid Cooled Solid State Transmitter 8.2 - 13 kW |
| Description | Predetermined Cost Estimate |
Estimated Cost | Estimated Cost Justification | Actual Cost | Actual Cost Justification |
|---|---|---|---|---|---|
| Sub-total | $259,171.72 | $138,208.26 | N/A | $116,591.09 | N/A |
| Total for all systems | $1,257,668.62 | $929,653.08 | N/A | $752,833.55 | N/A |
| Interim Antenna 750 10402 | $101,010.00 | $26,420.28 | $6,241.38 | ||
| New combiner, cost per channel (without antenna) | $84,200.00 | $13,628.90 | Please see the Kathrein quote 20180490-2 and attached narrative for details. | N/A | N/A |
| Sweep test of existing antenna | $6,730.00 | $6,550.00 | N/A | $0.00 | N/A |
| UHF – Broadband Panel, Side Mount Auxiliary/Interim, 21 horizontally polarized | $0.00 | $0.00 | PHANTOM ANTENNA | N/A | N/A |
| UHF - Lower Power Side Mount, Class A broadband panel (cost per panel) | $10,080.00 | $6,241.38 | Please see the Kathrein quote 20180490-2 and attached narrative for details. | $6,241.38 | N/A |
| Primary Antenna SBB-E-8C170 | $158,161.72 | $111,787.98 | $110,349.71 | ||
| Sweep test of existing antenna | $6,730.00 | $12,465.00 | Please see quote from RFS antennas 20067492 and Inv 1646795 / QT-EN and attached narrative for details; see Justifying Quote - KESQ Repack turnkey budgetary proposal Rev. 3 | $12,465.00 | N/A |
| UHF - High Power, Side Mount, basic slot antenna, 8 bay,, 42 kW input, directional,, elliptically or circularly polarized | $67,231.72 | $67,231.72 | Per RFS Invoice 16482058. Please see attached quote # 20067492 from RFS and attached narrative for details. | $67,231.71 | N/A |
| New combiner, cost per channel (without antenna) | $84,200.00 | $32,091.26 | Per Estimated Cost Justification KESQ-TV-210-Primary Antenna- Combiner v0, KESQ 50% portion cost of the combiner. Please see quote from RFS antennas 20067492 and attached narrative for details. | $30,653.00 | N/A |
| Actual Information Description | File Name |
|---|---|
| New combiner, cost per channel (without antenna) | Information not provided. |
| Sweep test of existing antenna | Information not provided. |
| UHF – Broadband Panel, Side Mount Auxiliary/Interim, 21 horizontally polarized | Information not provided. |
| UHF - Lower Power Side Mount, Class A broadband panel (cost per panel) | |
| Sweep test of existing antenna | |
| UHF - High Power, Side Mount, basic slot antenna, 8 bay,, 42 kW input, directional,, elliptically or circularly polarized | |
| New combiner, cost per channel (without antenna) |
| Description | Predetermined Cost Estimate |
Estimated Cost | Estimated Cost Justification | Actual Cost | Actual Cost Justification |
|---|---|---|---|---|---|
| Sub-total | $14,270.00 | $11,884.24 | N/A | $5,684.24 | N/A |
| Total for all systems | $1,257,668.62 | $929,653.08 | N/A | $752,833.55 | N/A |
| Interim Transmission Line | $6,600.00 | $6,200.00 | $0.00 | ||
| Flexible Air Transmission Line - dielectric, 1 5/8" | $6,600.00 | $6,200.00 | N/A | N/A | N/A |
| Primary Transmission Line | $7,670.00 | $5,684.24 | $5,684.24 | ||
| Flexible Air Transmission Line - dielectric, 3" | $7,670.00 | $5,684.24 | Please see quote from RFS antennas 20067492 and Inv 16467915 / 05/08/2018 / QT-EN and attached narrative for details. | $5,684.24 | N/A |
| Actual Information Description | File Name |
|---|---|
| Flexible Air Transmission Line - dielectric, 1 5/8" | Information not provided. |
| Flexible Air Transmission Line - dielectric, 3" |
| Description | Predetermined Cost Estimate |
Estimated Cost | Estimated Cost Justification | Actual Cost | Actual Cost Justification |
|---|---|---|---|---|---|
| Sub-total | $268,500.00 | $305,445.00 | N/A | $287,945.00 | N/A |
| Total for all systems | $1,257,668.62 | $929,653.08 | N/A | $752,833.55 | N/A |
| Primary Tower TOWER | $268,500.00 | $305,445.00 | $287,945.00 | ||
| Short Tower (less than 500') | $84,200.00 | $80,000.00 | Antenna system installation (short tower) | $62,500.00 | N/A |
| Tower mapping for an undocumented/poorly documented tower and preparation of documentation necessary for tower load study | $26,300.00 | $26,960.00 | see Justifying Quote - KESQ Repack turnkey budgetary proposal Rev. 3 | $26,960.00 | N/A |
| Minor tower reinforcement/modifications | $158,000.00 | $198,485.00 | JTD Consulting Invoice 47041S | $198,485.00 | N/A |
| Actual Information Description | File Name |
|---|---|
| Short Tower (less than 500') | |
| Tower mapping for an undocumented/poorly documented tower and preparation of documentation necessary for tower load study | |
| Minor tower reinforcement/modifications |
| Description | Predetermined Cost Estimate |
Estimated Cost | Estimated Cost Justification | Actual Cost | Actual Cost Justification |
|---|---|---|---|---|---|
| Sub-total | $155,522.50 | $157,028.16 | N/A | $129,883.36 | N/A |
| Total for all systems | $1,257,668.62 | $929,653.08 | N/A | $752,833.55 | N/A |
| Outside Professional Services | $155,522.50 | $157,028.16 | $129,883.36 | ||
| Additional Repack Legal Services Not Otherwise Specified in Form 399 | $9,752.50 | $9,752.50 | see Estimated Cost Justification KESQ-TV-550-Attorney - Additional Repack Legal Services v1 | $9,752.50 | invoices |
| RF Exposure Measurements | $21,050.00 | $20,500.00 | All costs for RF exposure measurements on shared equipment will be apportioned to KESQ-TV. See cover letter. | N/A | N/A |
| Attorney Fees - Prepare and File request for Special Temporary Authorization | $3,680.00 | $3,500.00 | N/A | $903.00 | N/A |
| Attorney Fees -Prepare and File FCC Form 2100 (main), License to Cover Application | $2,365.00 | $2,250.00 | N/A | $1,327.20 | N/A |
| Attorney Fees - Prepare and File FCC Form 2100 (main), Construction Permit Application | $5,260.00 | $5,655.36 | see Estimated Cost Justification KESQ-TV-550-Attorney - Construction Permit Application (Main) v0 | $5,655.36 | invoices |
| Prepare request for Special Temporary Authorization | $2,050.00 | $1,500.00 | N/A | $750.00 | N/A |
| Prepare engineering section of FCC Form 2100 (main), License to Cover Application | $1,580.00 | $500.00 | N/A | $375.00 | N/A |
| Prepare engineering section of FCC Form 2100 (main), Construction Permit Application | $3,155.00 | $1,500.00 | N/A | $1,500.00 | N/A |
| Perform engineering study for new channel assignment and antenna development | $7,360.00 | $3,187.50 | see Estimated Cost Justification KESQ-TV-530-RF Eng - Engineering Study for New Channel Assignment v0 | $3,187.50 | N/A |
| Address transition timing and coordination issues w/ other stations and wireless | $2,630.00 | $2,250.00 | N/A | N/A | N/A |
| Prepare and or review reimbursement form | $2,630.00 | $2,952.80 | see Estimated Cost Justification KESQ-TV-590-Prepare and_or Review Reimbursement Form v0 | $2,952.80 | N/A |
| Project management of the transition | $94,010.00 | $103,480.00 | The estimated cost has been adjusted to include all invoices submitted for reimbursement at this time. | $103,480.00 | Please see submitted invoices. |
| Actual Information Description | File Name |
|---|---|
| Additional Repack Legal Services Not Otherwise Specified in Form 399 | |
| RF Exposure Measurements | Information not provided. |
| Attorney Fees - Prepare and File request for Special Temporary Authorization | |
| Attorney Fees -Prepare and File FCC Form 2100 (main), License to Cover Application | |
| Attorney Fees - Prepare and File FCC Form 2100 (main), Construction Permit Application | |
| Prepare request for Special Temporary Authorization | |
| Prepare engineering section of FCC Form 2100 (main), License to Cover Application | |
| Prepare engineering section of FCC Form 2100 (main), Construction Permit Application | |
| Perform engineering study for new channel assignment and antenna development | |
| Address transition timing and coordination issues w/ other stations and wireless | Information not provided. |
| Prepare and or review reimbursement form | |
| Project management of the transition |
| Description | Predetermined Cost Estimate |
Estimated Cost | Estimated Cost Justification | Actual Cost | Actual Cost Justification |
|---|---|---|---|---|---|
| Sub-total | $51,304.40 | $42,689.40 | N/A | $30,124.40 | N/A |
| Total for all systems | $1,257,668.62 | $929,653.08 | N/A | $752,833.55 | N/A |
| Other Expenses | $51,304.40 | $42,689.40 | $30,124.40 | ||
| Disposal Costs (for equipment and other waste, net of any salvage value) | $21,800.00 | $21,800.00 | per Justifying Quote - KESQ Repack turnkey budgetary proposal Rev. 3 | $21,800.00 | N/A |
| Local Zoning | $5,500.00 | $5,500.00 | COST FOR DRAFTING,SUBMISSION AND FILING FEES FOR NECESSARY BUILDING PERMITS ASSOCIATED WITH TOWER MODIFICATIONS. | N/A | N/A |
| FCC Filing Fees - Special Temporary Authorization request | $195.00 | $190.00 | N/A | N/A | N/A |
| Attorney Fees and Other Matters | $374.40 | $374.40 | N/A | $374.40 | N/A |
| MVPD Notification of Channel Change | $2,500.00 | $2,500.00 | N/A | $750.00 | N/A |
| Develop and air announcement of upcoming channel change | $750.00 | $750.00 | N/A | N/A | N/A |
| Equipment Storage | $3,500.00 | $3,500.00 | N/A | $2,400.00 | N/A |
| Equipment Delivery and Handling Charges | $4,800.00 | $4,800.00 | see Justifying Quote - KESQ Repack turnkey budgetary proposal Rev. 3 | $4,800.00 | N/A |
| DTV Medical Facility Notification | $11,550.00 | $2,950.00 | N/A | N/A | N/A |
| FCC Filing Fees - Form 2100 license to cover application | $335.00 | $325.00 | N/A | N/A | N/A |
| Actual Information Description | File Name |
|---|---|
| Disposal Costs (for equipment and other waste, net of any salvage value) | |
| Local Zoning | Information not provided. |
| FCC Filing Fees - Special Temporary Authorization request | Information not provided. |
| Attorney Fees and Other Matters | |
| MVPD Notification of Channel Change | |
| Develop and air announcement of upcoming channel change | Information not provided. |
| Equipment Storage | |
| Equipment Delivery and Handling Charges | |
| DTV Medical Facility Notification | Information not provided. |
| FCC Filing Fees - Form 2100 license to cover application | Information not provided. |
| Predetermined Cost Estimate |
Estimated Cost | Actual Cost | |
|---|---|---|---|
| Total for all systems | $1,257,668.62 | $929,653.08 | $752,833.55 |
| Question | Response |
|---|---|
| The facility has ceased operating on its pre-auction channel. | Yes |
| Construction of final facilities or all necessary modifications are complete. | Yes |
| All receipts for reimbursement have been submitted no further costs are expected to be incurred. Note this will lock the Form 399 from further editing and begin close-out procedures with the Fund Administrator. | No |
| Section | Question | Response |
|---|---|---|
| Submission of Estimated Expenses Statements | WILLFUL FALSE STATEMENTS ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503), AND ANY FALSE STATEMENTS COULD SUBJECT THIS ENTITY TO LIABILITY UNDER THE FALSE CLAIMS ACT. |
|
| I declare, under penalty of perjury, that I am an authorized representative of the above-named applicant for the Authorization(s) specified above. | James W. DeChant VP of Technology 02/02/2021 |
| Section | Question | Response |
|---|---|---|
| Submission of Actual Cost Documentation Statements | WILLFUL FALSE, FRAUDULENT, OR FICTITIOUS STATEMENTS ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISIONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503), AND ANY FALSE AND/OR FRAUDULENT STATEMENTS COULD SUBJECT THIS ENTITY TO LIABILITY UNDER THE FALSE CLAIMS ACT (U.S. CODE, TITLE 31, SECTIONS 3729-3733). |
|
| I declare, under penalty of perjury, that I am an authorized representative of the above-named applicant for the Authorization(s) specified above. | James W. DeChant VP of Technology 02/02/2021 |
| Section | Question | Response |
|---|---|---|
| Submission of Final Allocation or Accounting Information Statements | WILLFUL FALSE STATEMENTS ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503), AND ANY FALSE STATEMENTS COULD SUBJECT THIS ENTITY TO LIABILITY UNDER THE FALSE CLAIMS ACT. |
|
| I declare, under penalty of perjury, that I am an authorized representative of the above-named applicant for the Authorization(s) specified above. | James W. DeChant VP of Technology 02/02/2021 |
