Go to the Federal Communications Commission homepage at www.fcc.gov

FCC Form 399: Incentive Auction Relocation Reimbursement Fund System

Approved by OMB 3060-1178
Go to the Federal Communications Commission homepage at www.fcc.gov

(REFERENCE COPY - Not for submission)FCC Form 399: Incentive Auction Relocation Reimbursement Fund System

File Number:
0000028278
FRN:
0009961889
Facility ID:
47404
Repack Channel:
7 (High VHF)
Entity:
Broadcaster
Filing Status:
Submitted
Date Submitted:
11/05/2018

Applicant Information

Back to Top

Applicant Name, Type, and Contact Information

Applicant Address Phone Email Applicant Type

NEXSTAR BROADCASTING, INC.

Elizabeth Ryder

545 E. John Carpenter Freeway

Suite 700

Irving, TX 75062

United States

+1 (972) 373-8800 eryder@nexstar.tv Corporation

Reimbursement Contact Information

Reimbursement Contact Name and Information

Applicant Address Phone Email

[Confidential]

 

 

 


Preparer Contact Information

Back to Top

Preparer Contact Name and Information

Applicant Address Phone Email

Elizabeth Ryder

General Counsel

Nexstar Broadcasting, Inc.

Elizabeth Ryder

545 E. John Carpenter Freeway

Suite 700

Irving, TX 75062

United States

+1 (972) 373-8800 eryder@nexstar.tv

Broadcaster Information and Transition Plan

Back to Top
Question Response
Will the station be sharing equipment with another broadcast television station or stations (e.g., a shared antenna, co-location on a tower, use of the same transmitter room, multiple transmitters feeding a combiner, etc.)? If yes, enter the facility ID's of the other stations and click 'prefill' to download those stations' licensing information. Yes
Briefly describe transition plan Purchase new transmitter, antenna and line for different tower because Malouf Engineering determined that upgrading the existing tower is not practical. See attachment.

Question Response
Sharee Station Facility ID 73311
Call Sign WNAC-TV
Type Commercial
Licensee Name WNAC, LLC
Status LICENSED
DTS No
Community of License PROVIDENCE, RI
Pre-auction RF Channel 12
Post-auction RF Channel 12
Neilsen DMA Providence-New Bedford
Network Affiliation

Transmitters

Back to Top
Section Question Response
Transmitter Related Expenses Do you have transmitter related expenses? Yes

Primary Transmitter

Back to Top

Existing Transmitter Information

Section Question Response
Existing Transmitter Description Type of change Purchase New
Use Primary (Main)
Description of Use  
Ownership Owned
Owner  
Site  
Is this transmitter currently shared with another station? No
Is this transmitter currently in operating condition? Yes
Existing Transmitter Manufacturer and Type Manufacturer
Model TDV2 3K75LV
Year 2007
Type Solid state
IOT Power Type  
Description  
Power capacity  
Solid State Cooling Liquid
Solid State Power Capacity 4 kw
Other Transmitter Type  

Primary Transmitter

Back to Top

New Transmitter Costs

Section Question Response
New Transmitter Use Primary (Main)
Description of Use  
Change Type Purchase New
Is this a request for upgraded equipment? No
Manufacturer
Model MPTV-PRLX-V4
Transmitter Type Solid state
IOT Power Type  
Other  
Power capacity  
Solid State Cooling Liquid
Solid State Power Capacity 4.4 kw
Other Transmitter Type  
Justification for New Transmitter The manufacturer of the existing transmitter advises that the transmitter cannot be re-tuned to the assigned channel. To be installed at new site. See attachment.

Primary Transmitter

Back to Top

Other Transmitter Costs

Section Question Response
Electrical Service Service Entrance (3 phases 800A 208V) No
Switchgear (industrial 800 amp) Yes
Transformer (480V) Yes
Power 150 kVA
Rigid Conduit and Wiring Yes
Size 2 inches
Length 100.0 feet
Other Electrical Service No
Description  
HVAC Service Does the replacement transmitter require HVAC Service? Yes
Type Cooling Only
Size 10 tons
Other Size  
Transmitter Building Addition/Modification or Leasehold Improvement Does the Transmitter Building require an addition, modification, other leashold improvement? Yes
Size 600.0 square feet
Channel 14 Costs Is an RF Consulting Engineer needed?
Is a channel 14 Mask Filer needed?
Is additional field engineering time needed?
Number of Days  

Primary Transmitter

Back to Top

Other Transmitter Cost Not Listed

Name Description

Standby Exciter and Switch

Standby Exciter with Automatic Change Over Switch

Additional Interior RF System

Interior RF System Existing Transmitter to Interim Transmission line

Antennas

Back to Top
Section Question Response
Antenna Related Expenses Do you have antenna related expenses? Yes

Primary Antenna

Back to Top

Existing Antenna Information

Section Question Response
Existing Antenna Description Type of change Purchase New
Antenna Use Primary (Main)
Description of Use N/A
Ownership Owned
Owner N/A
Site N/A
Is the existing antenna shared with another station or stations? Yes
Is the existing antenna directional? No
Is antenna in operating condition? Yes
Is antenna located on or in close proximity to an antenna farm? No
Existing Antenna Manufacturer and Type Class Full Power
Mounting Top-mount single
Antenna position in stack Not in Stack
Polarization Horizontal
Type Other Type
Number of Stations Supported N/A
Number of Panels N/A
Design power capacity in use N/A
Lower Limit N/A
Upper Limit N/A
Other Antenna Type Batwing
ERP: 30.00 kW
Manufacturer
Model TF-12BH-SP
Year 2007

Facility ID's and Call Signs of all stations with whom the antenna is shared.

Facility ID Call Sign
73311 WNAC-TV

Primary Antenna

Back to Top

New Antenna Costs

Section Question Response
New Antenna Description Use Primary (Main)
Description of Use N/A
Change Type Purchase New
Is this a request for upgraded equipment? Yes
Ownership Owned
Owner N/A
Is antenna shared? No
Is antenna directional? No
Will antenna be located on or in close proximity to an antenna farm? No
New Antenna Manufacturer and Type Class Full Power
Mounting Top-mount single
Antenna position in stack Not in Stack
Polarization Elliptical
Type Slotted coaxial
Number of Stations Supported N/A
Number of Panels/Bays N/A
Lower Limit N/A
Upper Limit N/A
Design power capacity in use N/A
Other Antenna Type N/A
ERP: 27.00 kW
Manufacturer
Model THV-8A7/CP-R O4
Year 2018
Justification for New Antenna Manufacturer reports that the existing batwing will not be suitable on the new channel 7 because it was constructed and optimized for channels 12 and 13. To be built at new site.

Primary Antenna

Back to Top

Other Antenna Costs

Section Question Response
Combiner for Shared Antenna Do you need a Combiner for a Shared Antenna? No
Type
Number of channels supported N/A
Frequencies of channels supported N/A
Frequency N/A
Do you need a combiner output splitter/switcher for dual feed lines? N/A
Elbow Complex Do you require the separate purchase of the Elbow Complex? Yes
Broadband or Single Channel? Single Channel
Feed Line Size 3 1/8 inches
Side Mount Brackets Do you require the separate purchase of side mount brackets for a high power antenna? No
Pattern Scatter Analysis Do you require separate purchase of pattern scatter analysis for a side mount high or medium power antenna? No
Sweep Test Do you require the sweep testing of transmission line and antenna? Yes

Primary Antenna

Back to Top

Other Antenna Cost Not Listed

Information not provided.

Transmission Line

Back to Top
Section Question Response
Transmission Line Related Expenses Do you have transmission line related expenses? Yes

Primary Transmission Line

Back to Top

Existing Transmission Line

Section Question Response
Existing Transmission Line Description Type of change Purchase New
Use Primary (Main)
Description of Use N/A
Ownership Owned
Owner N/A
Site N/A
Is the existing transmission line shared with another station or stations? Yes
Is Transmission Line in operating condition? Yes
Existing Transmission Line Manufacturer and Type Manufacturer
Type Flexible Air
Diameter 4 inches
Segment Length N/A
Other Segment Length
Number of parallel runs 2
Length 1000 feet per run

Facility ID's and Call Signs of all stations with whom the transmission line is shared.

Facility ID Call Sign
73311 WNAC-TV

Primary Transmission Line

Back to Top

New Transmission Line

Section Question Response
New Transmission Line Costs Use Primary (Main)
Description of Use N/A
Change Type Purchase New
Is this a request for upgraded equipment? No
Type Rigid
Diameter 3 1/8 inches
Segment Length 20'
Other Segment Length
Number of parallel runs 1
Length 1020 feet per run
Justification for New Transmission Line Moving antenna to new site requires new line to support the new antenna.

Primary Transmission Line

Back to Top

Other Transmission Line Expenses Not Listed

Information not provided.

Tower Equipment And Rigging Costs

Back to Top
Section Question Response
Tower Equipment or Rigging Costs Changes Do you have tower equipment or rigging costs changes? Yes

Primary Tower

Back to Top

Existing Tower

Section Question Response
Existing Tower Description Type of change Modify Existing
Tower Use Primary (Main)
Description of Use N/A
Ownership Owned
Is this tower consider Complex? No
Is this tower currently shared with any other stations? Yes
One or more FM, AM or TV radio broadcaster(s) Yes
Others Types of Users No
Is tower documented for structural analysis? No
Is tower compliant with Rev G? No
Existing Tower Structure Registration Do you have a tower registration number? Yes
ASR Number 1021703
Coordinates (NAD83) Latitude (NAD83) 41° 52' 36.0" N-
Longitude (NAD83) 071° 16' 55.0" W-
Overall Structure Height 971.77 feet
Support Structure Height 892.38 feet
Ground Elevation Above Mean Sea Level (AMSL) 165.02 feet
Structure Type TOWER - Free Standing or Guyed Structure
Tower Owner Nexstar Broadcasting, Inc.
Date Constructed 01/01/1967

FM, AM or TV radio broadcasters. Facility ID's, Call Signs and Services of other broadcast stations with whom the tower is shared

Facility ID Call Sign Service
73311 WNAC-TV DTV

Primary Tower

Back to Top

Tower Modification Costs

Section Question Response
Engineering Study Please what type of engineering study is required, if any: Study needed for undocumented/poorly documented tower
Tower Reinforcements Please select whether tower reinforcements are needed: Major Reinforcements needed

Primary Tower

Back to Top

Tower Rigging Costs

Section Question Response
Tower Rigging Costs Complex Tower N/A
Helicopter Services Required Are helicopter services required? No

Primary Tower

Back to Top

Other Tower Expenses Not Listed

Information not provided.

Outside Professional Services Costs

Back to Top
Section Question Response
Outside Project Management Services Do you require outside project management services? Yes
Number of Hours 277
Explanation Schedule and coordinate multiple vendors, complete progress reports, and update Schedule 399. Station does not have available personnel or personnel trained in project management for such complex projects. Internal accounting and Project management.
Outside RF consulting Engineering Services Perform engineering study for new channel assignment and antenna development Yes
Prepare engineering section of Form FCC Construction Permit Application Yes
For Auxiliary Facility No
For Main Facility Yes
Prepare engineering section of Form FCC License to Cover Application Yes
For Auxiliary Facility No
For Main Facility Yes
Prepare request for Special Temporary Authority No
Quantity N/A
Do you have Distributed Transmission System engineering services? N/A
Critical Facility N/A
Terrain-Shielded Facility N/A
Attorney and Other Outside Consulting Services Prepare and file Form FCC Construction Permit Application Yes
For Auxiliary Facility No
For Main Facility Yes
Prepare and file Form FCC License to Cover Application Yes
For Auxiliary Facility No
For Main Facility Yes
Prepare request for Special Temporary Authority No
Quantity N/A
NEPA Section 106 environmental review No
Environmental Assessment No
ASR Modification Yes
FAA Consultation (including preparation of FAA Form 7460) Yes
Negotiation of Lease and other Matter for Shared Locations No
Prepare or Review FCC Form 399 for Reimbursement Yes
Address transition timing and coordination issues w/ other stations and wireless providers Yes
RF Field Engineering Services Comprehensive coverage verification via field study No
RF exposure measurements No
Additional Field Engineering Service Yes
Number of Days 9
Justification It will be necessary to survey the site, plan the equipment, develop specifications for purchasing, and oversee multiple vendor RF projects. Station does not have available personnel or personnel trained in such services.

Outside Professional Services Costs

Back to Top

Other Professional Services Expenses Not Listed

Information not provided.

Other Expenses

Back to Top
Section Question Response
AM Pattern Disturbance Is an Impact Study needed? No
Is Remediation needed? No
Facility Expenses Name N/A
Other Distributed Transmission System Expenses Not listed N/A
Name N/A
Is Notification of a Medical Facility required as a result of DTV broadcasting? Yes
Permit and Filing Costs Local Zoning No
Non-zoning permits Yes
BLM or NFS Coordination No
FCC Construction Permit Minor Change No
FCC License to Cover Application No
FCC Special Temporary Authority Application No
Other Miscellaneous Expenses Does this relocation require paying Disposal Costs (for equipment and other waste, net of any salvage value)? Yes
Does this relocation require Equipment Delivery or Handling Charges not otherwise included in individual item costs? Yes
Does this relocation require Equipment Storage? Yes
Does this relocation require the Development and Airing of an Announcement regarding an upcoming channel change? Yes
Does this relocation require MVPD Notification of a Channel Change? Yes

Other Expenses

Back to Top

Other Expenses Not Listed

Name Description

Sales Tax

Sales and use tax on goods and services

STL

Studio to Transmitter Link - new path required for new transmitter site.

Cost Information

Back to Top

Transmitters

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate
Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $395,550.00 $395,550.00 N/A $0.00 N/A
Total for all systems $1,727,511.25 $1,719,280.25 N/A $507,097.30 N/A
Primary Transmitter MPTV-PRLX-V4 $395,550.00 $395,550.00 $0.00
Additional Interior RF System $19,000.00 $19,000.00 N/A N/A N/A
Switchgear - industrial 800 amp $37,150.00 $37,150.00 N/A N/A N/A
High VHF - Liquid Cooled Solid State Transmitter 3.3 . 6.5 kW $242,500.00 $242,500.00 N/A N/A N/A
Transformer 3 phase/480v - 150 KVA $24,900.00 $24,900.00 N/A N/A N/A
2" Rigid Conduit and Wiring (Cost per foot) $2,600.00 $2,600.00 N/A N/A N/A
10 Ton system $37,900.00 $37,900.00 N/A N/A N/A
Other -- Building Addition Size: 600.0 $6,500.00 $6,500.00 Room modifications needed to move walls, plumbing, electrical, fixtures, etc. N/A N/A
Standby Exciter and Switch $25,000.00 $25,000.00 N/A N/A N/A

Components

Information not provided.

Cost Information

Back to Top

Antennas

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate
Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $285,266.00 $284,560.00 N/A $250,344.00 N/A
Total for all systems $1,727,511.25 $1,719,280.25 N/A $507,097.30 N/A
Primary Antenna THV-8A7/CP-R O4 $285,266.00 $284,560.00 $250,344.00
High VHF - High Power Top Mount One Station elliptically or circularly polarized $271,136.00 $271,136.00 See Dielectric quote DMS133-2; quote includes separate cost of $41,067 for vpol. Nexstar will not seek reimbursement for this added cost. $244,022.40 N/A
Elbow complex, single channel, at antenna input, per 3 1/8. feedline (if needed) $7,580.00 $7,024.00 See Attached Dielectric Quote $6,321.60 N/A
Sweep test of existing antenna $6,550.00 $6,400.00 N/A N/A N/A

Components

Actual Information Description File Name
High VHF - High Power Top Mount One Station elliptically or circularly polarized

Component Description:
Antenna component, line 1 of invoice, installment #2
Amount:
$122,011.20

Component Description:
Antenna component, line 1 of invoice, installment #1
Amount:
$122,011.20
Elbow complex, single channel, at antenna input, per 3 1/8. feedline (if needed)

Component Description:
Elbow complex, line 3 of invoice, installment #2
Amount:
$3,160.80

Component Description:
Elbow complex, line 3 of invoice, installment #1
Amount:
$3,160.80
Sweep test of existing antenna Information not provided.

Cost Information

Back to Top

Transmission Line

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate
Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $103,020.00 $88,192.00 N/A $79,372.80 N/A
Total for all systems $1,727,511.25 $1,719,280.25 N/A $507,097.30 N/A
Primary Transmission Line $103,020.00 $88,192.00 $79,372.80
Rigid Transmission Line - copper, 3 1/8" $103,020.00 $88,192.00 See attached Dielectric Quote $79,372.80 N/A

Components

Actual Information Description File Name
Rigid Transmission Line - copper, 3 1/8"

Component Description:
Transmission line component, line 4 of invoice, installment #1
Amount:
$38,380.41

Component Description:
Transmission line component, line 21 of invoice, installment #1
Amount:
$1,305.99

Component Description:
Transmission line component, line 21 of invoice, installment #2
Amount:
$1,305.99

Component Description:
Transmission line component, line 4 of invoice, installment #2
Amount:
$38,380.41

Cost Information

Back to Top

Tower Equipment and Rigging Costs

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate
Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $640,100.00 $647,403.00 N/A $160,695.00 N/A
Total for all systems $1,727,511.25 $1,719,280.25 N/A $507,097.30 N/A
Primary Tower TOWER $640,100.00 $647,403.00 $160,695.00
Tower mapping for an undocumented/poorly documented tower and preparation of documentation necessary for tower load study $25,600.00 $32,903.00 For a different tower owned by the licensee, ASR 1038231, because the existing tower cannot be upgraded. See quotes from Malouf and Coast to Coast. $32,903.00 N/A
Major tower reinforcement/modifications $409,500.00 $409,500.00 For a different tower owned by the licensee, ASR 1038231, because the existing tower cannot be upgraded. $101,272.00 N/A
Tall Tower (greater than 500') $205,000.00 $205,000.00 On a different tower owned by the licensee, ASR 1038231, because the existing tower cannot be upgraded. $26,520.00 N/A

Components

Actual Information Description File Name
Tower mapping for an undocumented/poorly documented tower and preparation of documentation necessary for tower load study

Component Description:
Design structural modifications update as required by structural analysis results and prepare modification working drawings update and Technical Specification Notes and Tower Top ReAnalysis.
Amount:
$2,500.00

Component Description:
Design structural modifications as required by structural analysis results and prepare modification working drawings and Technical Specification Notes and Tower Top Analysis.
Amount:
$5,000.00

Component Description:
Structural analysis and Engineering report
Amount:
$8,000.00

Component Description:
Balance due on completion of Tower Inspection
Amount:
$8,403.00

Component Description:
Deposit for Tower Inspection
Amount:
$4,000.00

Component Description:
Perform a Structural Analysis for WPRI-TV Tower and prepare an engineering report.
Amount:
$5,000.00
Major tower reinforcement/modifications

Component Description:
Deposit as agreed per Nexstar Commitment Letter and Coast to Coast Tower Service
Amount:
$10,000.00

Component Description:
Deposit for Repack Tower Modification Services
Amount:
$91,272.00
Tall Tower (greater than 500')

Component Description:
Deposit for Repack Top Mount TV Antenna System Installation Services
Amount:
$26,520.00

Cost Information

Back to Top

Outside Professional Services

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate
Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $89,078.00 $89,078.00 N/A $16,685.50 N/A
Total for all systems $1,727,511.25 $1,719,280.25 N/A $507,097.30 N/A
Outside Professional Services $89,078.00 $89,078.00 $16,685.50
Perform engineering study for new channel assignment and antenna development $7,170.00 $7,170.00 N/A $7,000.00 N/A
Prepare engineering section of FCC Form 2100 (main), Construction Permit Application $3,070.00 $3,070.00 N/A $3,000.00 N/A
Additional Field Engineering Service, 9 Days $18,000.00 $18,000.00 N/A N/A N/A
FAA consultant, including cost of preparing FAA Form 7460 (Notice of Proposed Construction), if needed for height increase $2,050.00 $2,050.00 N/A N/A N/A
ASR modification (prepare FCC Form 854) $2,050.00 $2,050.00 N/A N/A N/A
Attorney Fees -Prepare and File FCC Form 2100 (main), License to Cover Application $2,305.00 $2,305.00 N/A N/A N/A
Attorney Fees - Prepare and File FCC Form 2100 (main), Construction Permit Application $5,120.00 $5,120.00 N/A N/A N/A
Prepare engineering section of FCC Form 2100 (main), License to Cover Application $1,535.00 $1,535.00 N/A N/A N/A
Address transition timing and coordination issues w/ other stations and wireless $2,560.00 $2,560.00 N/A N/A N/A
Prepare and or review reimbursement form $2,560.00 $2,560.00 N/A $2,500.00 N/A
Project management of the transition $42,658.00 $42,658.00 N/A $4,185.50 N/A

Components

Actual Information Description File Name
Perform engineering study for new channel assignment and antenna development

Component Description:
Perform engineering study for new channel assignment, item 3 from invoice summary
Amount:
$7,000.00

Component Description:
KGA subcontractor invoice line 2
Amount:
$7,000.00

Component Description:
Vendor has issued a revised invoice.
Amount:
($7,000.00)
Prepare engineering section of FCC Form 2100 (main), Construction Permit Application

Component Description:
Prepare engineering section of FCC Form 2100, item 4 from invoice summary
Amount:
$3,000.00

Component Description:
Vendor has issued a revised invoice
Amount:
($3,000.00)

Component Description:
KGA subcontractor invoice line 3
Amount:
$3,000.00
Additional Field Engineering Service, 9 Days Information not provided.
FAA consultant, including cost of preparing FAA Form 7460 (Notice of Proposed Construction), if needed for height increase Information not provided.
ASR modification (prepare FCC Form 854) Information not provided.
Attorney Fees -Prepare and File FCC Form 2100 (main), License to Cover Application Information not provided.
Attorney Fees - Prepare and File FCC Form 2100 (main), Construction Permit Application Information not provided.
Prepare engineering section of FCC Form 2100 (main), License to Cover Application Information not provided.
Address transition timing and coordination issues w/ other stations and wireless Information not provided.
Prepare and or review reimbursement form

Component Description:
Prepare reimbursement form, item 2 from invoice summary
Amount:
$2,500.00

Component Description:
KGA subcontractor invoice line 1
Amount:
$2,500.00

Component Description:
Vendor has issued a revised invoice
Amount:
($2,500.00)
Project management of the transition

Component Description:
Project management services 7.28.18 through 9.28.18
Amount:
$875.00

Component Description:
Prepare FCC Schedule 387, item 7 from invoice summary
Amount:
$150.00

Component Description:
Prepare FCC Schedule 387, item 6 from invoice summary
Amount:
$150.00

Component Description:
Prepare FCC Schedule 387, item 5 from invoice summary
Amount:
$300.00

Component Description:
Project management services, item 8 from invoice summary
Amount:
$383.00

Component Description:
Project management services, item 1 from invoice summary
Amount:
$1,427.50

Component Description:
Project Management for Structural Analysis and Tower Modifications including consultants Kessler and Gehman Associates. Services from May 27, 2017 through June 30, 2017.
Amount:
$1,000.00

Component Description:
Preparation of FCC Schedule 387 Progress report
Amount:
$300.00

Component Description:
Project Management for Structural Analysis and Tower Modifications including consultants Kessler and Gehman Associates. Services from January 27, 2018 through February 23, 2018.
Amount:
$450.00

Component Description:
Vendor has issued a revised invoice
Amount:
($450.00)

Component Description:
Vendor has issued a revised invoice
Amount:
($300.00)

Component Description:
Vendor has issued a revised invoice
Amount:
($1,000.00)

Component Description:
Project management for structural analysis and tower modifications 1.1.18 through 1.26.18
Amount:
$450.00

Component Description:
Project management services 5.26.18 through 6.29.18
Amount:
$450.00

Cost Information

Back to Top

Other Expenses

Where no predetermined cost estimate is available, any estimate provided will also become the predetermined cost (displayed in italics).
Description Predetermined
Cost Estimate
Estimated Cost Estimated Cost Justification Actual Cost Actual Cost Justification
Sub-total $214,497.25 $214,497.25 N/A $0.00 N/A
Total for all systems $1,727,511.25 $1,719,280.25 N/A $507,097.30 N/A
Other Expenses $214,497.25 $214,497.25 $0.00
Sales Tax $3,136.00 $3,136.00 N/A N/A N/A
MVPD Notification of Channel Change $2,000.00 $2,000.00 N/A N/A N/A
Develop and air announcement of upcoming channel change $3,500.00 $3,500.00 Production time for producing spots and crawls for viewer notification. N/A N/A
Equipment Storage $25,000.00 $25,000.00 N/A N/A N/A
Disposal Costs (for equipment and other waste, net of any salvage value) $25,000.00 $25,000.00 N/A N/A N/A
Non-zoning permits $25,000.00 $25,000.00 N/A N/A N/A
DTV Medical Facility Notification $11,250.00 $11,250.00 N/A N/A N/A
Equipment Delivery and Handling Charges $25,000.00 $25,000.00 N/A N/A N/A
STL $94,611.25 $94,611.25 See attached quote - since WPRI must move to another tower at another transmitter site location, it is required to establish a new studio to transmitter link. An additional $5,000 is added for required licensing since it is not included in the quote. N/A N/A

Components

Information not provided.

Cost Information

Back to Top

Grand Total

Predetermined
Cost Estimate
Estimated Cost Actual Cost
Total for all systems $1,727,511.25 $1,719,280.25 $507,097.30

Construction Status

Back to Top
Question Response
Is construction complete? No

Certification

Back to Top
Section Question Response
Submission of Estimated Expenses Statements

WILLFUL FALSE STATEMENTS ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503), AND ANY FALSE STATEMENTS COULD SUBJECT THIS ENTITY TO LIABILITY UNDER THE FALSE CLAIMS ACT.

  1. The Authorized Person signing below certifies that he/she is authorized to submit this TV Broadcaster Relocation Fund Reimbursement Form on behalf of the above-named entity.

  2. The above-named entity acknowledges that all certifications and attached documentation are considered material representations.

  3. The above-named entity acknowledges the submission of the information herein creates no obligation on the part of the government to pay any amount.

  4. The above-named entity certifies that the equipment and services paid for with money from the TV Broadcaster Relocation Fund are necessary to change channels (broadcasters) or to continue to carry the signal of a broadcaster that changes channels (MVPD).

  5. The above-named entity certifies that all payments from the TV Broadcaster Relocation Fund (Fund) received by the entity listed on this form will be used only for expenses that are eligible for reimbursement from the Fund.

  6. The above-named entity certifies that it will maintain and provide to the Commission detailed records, including receipts, of all costs eligible for reimbursement actually incurred.

  7. The above-named entity acknowledges that overpayments or payments in error must be promptly refunded to the Commission.

  8. The above-named entity certifies that it is in full compliance with all statutes, rules, regulations and governmental requirements for which compliance is a pre-requisite for obtaining the payments herein requested.

I declare, under penalty of perjury, that I am an authorized representative of the above-named applicant for the Authorization(s) specified above.

Elizabeth Ryder

General Counsel


11/05/2018

Certification

Back to Top
Section Question Response
Submission of Actual Cost Documentation Statements

WILLFUL FALSE STATEMENTS ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503), AND ANY FALSE STATEMENTS COULD SUBJECT THIS ENTITY TO LIABILITY UNDER THE FALSE CLAIMS ACT.

  1. The Authorized Person signing below certifies and represents that he/she is authorized to submit this TV Broadcaster Relocation Fund Reimbursement Form on behalf of the above-named entity. The above-named entity acknowledges that all certifications and attached documentation are considered material.

  2. The above-named entity acknowledges the submission of the information herein creates no obligation on the part of the government to pay any amount.

  3. The above-named entity certifies that the equipment and services paid for with money from the TV Broadcaster Relocation Fund are necessary to change channels (broadcasters) or to continue to carry the signal of a broadcaster that changes channels (MVPD).

  4. The above-named entity certifies that all payments from the TV Broadcaster Relocation Fund (Fund) received by the entity listed on this form will be used only for expenses that are eligible for reimbursement from the Fund.

  5. The above-named entity certifies that the cost information/documents submitted reflect costs actually incurred.

  6. The above-named entity acknowledges that overpayments or payments in error must be promptly refunded to the Commission.

  7. The above-named entity certifies that it is in full compliance with all statutes, rules, regulations and governmental requirements for which compliance is a pre-requisite for obtaining the payments herein requested.

I declare, under penalty of perjury, that I am an authorized representative of the above-named applicant for the Authorization(s) specified above.

Elizabeth Ryder

General Counsel


11/05/2018

Attachments

Back to Top